Avid have introduced a rear carbon fibre chassis brace set for the Xray XB8 and XB8E buggies. The 1.5mm parts are designed to stiffen up the rear of the car for high traction surfaces and included in the set are two braces as well as three stainless steel screws and nuts. The set fits all 2016 to present XB8 and XB8E kits.
Source: Avid [avidrc.com]
Three qualifiers have been completed at the penultimate round of the Euro Offroad Series in Austria and it is Joona Haatanen who becomes the third different driver to post a TQ run. Following on from the Team Associated 1-2 lead by Neil Cragg in Q2, Haatanen put in a blistering third round with his B6.1 to better the previous best time set by Michal Orlowski in the opening run by 2-seconds. It was reigning champion Orlowski who would be closest to Haatanen, the difference 3-seconds, with Xray’s Daniel Kobbevik making it an all ‘Young Guns’ Top 3. With early errors putting Bruno Coelho, now out of contention for the overall TQ, and Cragg out of the Q3 running, it was former multiple champion Joern Neumann would get fourth ahead of Martin Bayer and Marc Rheinard.
Continue reading this report here or view our complete event coverage here.
JConcepts have introduced the Kosmos 1/8th buggy tyre for dry, rutted and dusty Euro-style tracks. Developed with input of IFMAR World Champion, David Ronnefalk the JC design team took to a rectangular based pin which has the forward bite muscle to boost a 1/8th buggy. The staggered rows create a unique zig/zag affect at certain views giving it a 3D mind puzzle affect. In fact, the design is four rows deep of off-set and staggered sections when compared to some traditional tyres which rely on two. The tread also has connected several sections of pins with a V-feature to strengthen the base to make super soft compounds manageable even in high-speed conditions. The outer rows of pins have been clipped and held back for maximum cornering consistency on bumpy and chunky conditions. The inside of the carcass boasts the standard three radial ribs that help minimise tyre expansion under hard acceleration and cushions hard impacts. The tyre includes the Dirt-Tech closed cell inserts and it comes in a variety of compounds including blue, green, black, R2, O2 and Y2.
Source: JConcepts [jconcepts.net]
Neil Cragg led a Team Associated 1-2 in the second round of 2WD qualifying at the Euro Offroad Series, the EOS Daun winner topping the times in Austria from young Swedish team-mate Elias Johansson. Again the qualifier would see mistakes, or lack of mistakes, decide the result. Having taken the opening qualifier, Michal Orlowski looked on target to repeat but working through traffic he had contact with Round 1 podium finisher Daniel Kobbevik. Getting out of his rhythm as a result, on the next lap the Schumacher driver had a costly mistake eventually ending up 6th fastest for the round. Another to challenge for the TQ, Bruno Coelho would collect Marc Rheinard who had put his Yokomo on its roof leaving the Top Seed with a tweaked car leading to a subsequent incident in which a mistake from the Xray driver ended up costing Joern Neumann around 5-seconds in the wall section. At the end of the 5-minutes it was Coelho who recovered to complete the Top 3 ahead of Rheinard and Lee Martin.
Continue reading this report here or view our complete event coverage here.
Despite running off the drivers stand during the warm-up because his car’s drivetrain was making funny noises, it was Michal Orlowski who has TQ’d the opening round of qualifying at the Euro Offroad Series in Austria. Fifth in seeding, the Schumacher driver was able to take up his starting position after some quick work to put in place some offending missing screws and the Pole was further in luck when top seed Bruno Coelho hit trouble in traffic while on for a TQ run. With Coelho dropping to fourth, Orlowski topped Q1 by over a second from Neil Cragg with Marc Rheinard a surprise 3rd.
Continue reading this report here or view our complete event coverage here.
Having missed the previous round of the Euro Offroad Series due to touring car commitments, Bruno Coelho marked his return to the championship at Wels, Austria by topping seeding for 2WD qualifying. The penultimate round of the championship, the Xray driver set the fastest 2-consecutive laps around the 20-second lap track ahead of Neil Cragg and Joern Neumann. Coming into the weekend at the top of the points table, defending Champion Michal Orlowski posted the 5th fastest time 2/10ths down on Coelho.
Continue reading this report here or view our complete event coverage here.
Coming from T-Works and made for Serpent’s new Project 4X Evo 1/10th touring car are a range of new option parts. Available soon are items such as a 12-piece set of 4.5mm 7075-T6 pivot balls that feature a 2mm hex head and a hard-coated surface. Using the items over the standard steel parts will reduce the car’s weight for added performance. Also available are 64 grade titanium and a titanium hybrid turnbuckle sets for looks and a lower weight, as well as 64 grade titanium screw set with UFO heads and a gold-plated steel screw set.
Yeah Racing have introduced their new super bright aluminium LED light bar for 1/10th crawlers and trail trucks. A tough aluminium frame houses over ten super bright LEDs for improved vision during night rides and the includes triangular mounting brackets make installation on a variety of body shell design easy. The light bar is powered by 7.2V up to 12V power sources and it is available in red, blue or black colour.
