Coming from Power HD is their new R12 low-profile digital servo for 1/10th electric applications. It features straight-line gears for 30 percent higher geardtrain efficiency, it is high voltage compatible and features an overall new design. The coreless motor servo is capable of pulling up to 12kg-cm of torque at as speed down to 0.06s, making it usable for 1/10th touring, off-road and pan car applications.
Pro-Line have introduced the new Inversion 2.2” 2WD and 4WD buggy front tyres. The tyre is essentially an inverted Positron tread design that has been developed for tracks where ghost pins or almost slicks are ideal. The Inversion features directional grooves much deeper than the Prime tyres combined with a rough textured tread surface for amazing grip even in dusty conditions. New to the tyre is a flatter profile for an improved contact patch over previous tyres. The Inversion is available as a 2WD and a 4WD front variant in both M4 super soft and MC clay compounds.
Axial’s SCX10 transmission received a design makeover with special attention paid towards aesthetics by mimicking a real transmission with a bell housing, oil pan and a 4×4 transfer case. By sitting the transfer case lower into the chassis and centering the driveshafts with the axle input housings, the designers have created a more efficient driveline with better driveshaft angles which puts less stress on moving parts. Better driveshaft angles coupled with hi-pinion axles IS scale realism backed with performance. Also includes full set of ball bearings and all metal internal gears for strength and durability.
View a list of the features here
German company Shepherd have introduced their new Velox V10 WC2018 1/10th 200mm nitro on-road kit. Based on the successful Velox V10 WC platform the latest car kit has been developed in close cooperation with Shepherd’s team drivers as well as club level racers from all over the world. The kit includes all of the new parts that were already successfully used at the European Championship, the Euro Nitro Series and many other races around the world in order to create an easy to drive, reliable, efficient and easy to work on car.
The second round of the Swiss Offroad Masters series was held at the Islikon track recently. Xray’s Adi Riederer was in control of things all day long, taking double TQs and wins in the 2WD Modified and 4WD Modified Buggy classes. Elias Ehrmann (Xray) would come in 2nd in the 2WD class from Xray teammate Silvio Pietroboni in 3rd. Over in 4WD the podium was completed by Michi Wüest (TLR) 2nd and Philippe Weber (Yokomo) 3rd.
The Arena33 in Andernach recently hosted round three of the Xray Racing Series Germany. After lots of practice on Saturday, the racers were well prepared for race day at this permanent indoor track of Tonisport and the Rheinard family. For the qualification, the best of three heats were counted by laps and time, for the finals the points of the best two runs were added to the final ranking. Once again, Uwe Baldes race director and time keeper made it a smooth event.
Continue reading the report here
Revolution Design Racing Products’ new Ultra tyre glue tips come in handy when glueing your favourite on-road or off-road tyres. Ultra flexible and of a universal design the tips fit a wide range of CA glue bottles, including RDRP’S own Ultra Tire Glue, and they make tyre glueing and sidewall prepping a breeze. The tips come in packs of 20 and some trimming of the bottle neck may be required to fit the nozzle.
The fourth and final round of the Victorian Drivers Series was held at the Keilor Track in Melbourne. Over 130 entries were received for the event, which was re-run two weeks later than planned due to unseasonal summer rain washing out the original date. The Keilor club had prepared a classic outdoor dirt track which grooved up through the weekend but still had a fine dust layer in the hot summer weather, making tyre choice and setup critical to get maximum traction. Racers had travelled from as far away as Broken Hill, Mildura and Adelaide to join in this successful series. The Keilor Cup this year had extra meaning due to the recent passing of life member and long time president Mark Polistena, and many racers carried memorial stickers on their vehicles to honour his memory.
Continue reading the report here
