Red RC

November 22, 2017

Floating Master RC tooling block

Floating Master have introduced their new RC tooling block, a multifunctional tool that combines a bulkhead alignment block, a gear differential workbench and a soldering jig. The bulkhead alignment function is usable with the Tamiya TRF419X and 419XWS, Xray T4 2015 to 2017, as well as the Yokomo BD7 2015 and 2016 and BD8. In addition to this do multiple machined holes allow to hold gear differentials during building, setup and maintenance while dual 4mm and 5mm holes take bullet-type connectors during soldering. The part is machined from high-quality 7075-T6 aluminium, it comes black anodised and with light green edge details.

View more images here

November 22, 2017

Roberto Alessandrelli wins at TIT Cup Rd1

The opening round of the TIT Cup was held in Schöftland, Switzerland in Touring Pro Stock and Formula classes. In Pro Stock it was Roberto Alessandrelli with the TQ from Philipp Huber, who took two round TQs in the opening two qualifiers, and Maurice Lüscher in 3rd. In the finals Roberto was able to conserve his qualifying performance to take the win from Maurice in 2nd, while Philipp had to settle for 3rd despite two 2nd place finishes in the triple mains.

Source: HRC Distribution [hrcdistribution.com]

November 22, 2017

175RC 22 4.0 SR ultra lightweight carbon tower

Made for TLR’s 22 4.0 SR 2WD buggy is an ultra lightweight carbon fibre front shock tower from 175RC. All new and designed specifically for the TLR 22 4.0 SR, the 4mm 2-hole shock stay is nearly three grams lighter than the stock tower while still being strong enough to survive competitive racing. Included come 1mm spacers for the shock standoffs.

View another image here

November 22, 2017

Capricorn 1/10th touring foam tyres

Capricorn have introduced their new line of pre-mounted foam tyres for electric touring cars. The tyres use the same wheel offset as as most pre-glued rubber wheels, making them a direct fit on most of today’s touring cars and the tyres come in medium or soft compound. Testing has shown that foam tyres can have more consistency over their whole lifespan compared to rubber tyres and they recently gained interest especially in Italy and the U.S..

Source: Capricorn [capricornrc.com]

November 21, 2017

JConcepts rubber bump stops for monster trucks

JConcepts have released an 8-piece set of rubber bump stops for the suspension of monster trucks. In the world of RC monster trucks, its all about suspension travel. Drivers jockey for improved suspension with unique setups, conversions and shock combinations. The position of the shocks have a huge affect on performance and while more travel can help, sometimes a cushion or soft stop at the end can really smooth out the ride. JConcepts now offers a rubber bump stop which works with any combination of 3 and 3.5mm shock shaft diameters. The stop is T-shaped in design which allows the builder to place the large diameter end where more support is needed. With a solid axle beast, sometimes it is necessary to limit the up-stroke of the shock to prevent chassis, body or tyre damage. The shape also allows cushion and some fold under high impact situations as an additional benefit. The stops are 10mm in length but can be trimmed to any desired length or to suit a specific purpose. 8 pieces are included per package which is handy for outfitting multiple trucks or one truck with additional shocks.

View another image here

November 21, 2017

BMT 701 rear aluminium dog bone driveshafts

BMT have introduced new rear aluminium driveshaft dog bones for the 701 1/10th nitro on-road car. They are machined from high-quality alloy and come hard anodised for wear. The driveshafts weigh in at 3.4g each versus 5.5g for the original steel parts, scrubbing rotational mass for improved acceleration and brake performance.

Source: BMT [bmt-team.com]

November 21, 2017

RDRP B64 carbon/aluminium centre bulkhead cover

Made for the Team Associated B64 series of 1/10th 4WD buggies is RDRP’s new carbon and aluminium centre bulkhead cover. It replaces the standard composite part with a more rigid and also way cooler looking assembly that adds to the overall appearance of the buggy while also reinforcing the motor mount and centre bulkhead area for increased drivetrain efficiency. The assembly is constructed from high-quality carbon fibre and anodised aluminium, it is available in black or blue colour and fits both the B64 and B64D kits.

View another image here

November 21, 2017

Wynn & Schafer win at FSEARA On-road Series Rd3

Race 3 of the FSEARA On-road Series was hosted by Village Raceway in Royal Palm Beach, Florida over the weekend. The track was extremely high-speed, high traction, and slightly bumpy, which proved to be a tricky combination for most of the racers. Paul Wynn went on to TQ all three rounds of qualifying and lead wire to wire to take the win in the prestigious Pro Mod class. While privateer racer Troy Schafer TQ’d round one of qualifying in the Expert 17.5 Stock class. Troy had to settle for P3 on the grid after three rounds and in the A-main he had a small mistake on lap one that dropped him back to fourth, but he put his head down and quickly ran down the top three with the fastest laps of the race to go on to take the win.

Source: JConcepts [jconcepts.net]