Red RC

November 10, 2017

SWorkz S35-3 series Pro Composite radio tray set

Coming from SWorkz and made for the S35-3 series of off-road and on-road cars is the Pro Composite radio tray set. Included are a composite plastic 1-piece radio tray that is decked out with carbon fibre receiver and battery compartment covers. While looking the part the matte finish lids also reinforce the whole assembly for improved chassis stiffness. An additional mounting position further strengthens the radio box area. The radio tray set is usable with the S35-3 nitro buggy, S35-3 nitro truck and the S35-GT nitro GT car.

View another image here

November 10, 2017

Exotek Mini Apex GT-Z body & drag link set

Exotek have released a limited edition run of their popular GT-Z Mini Apex Touring body shell as well as a drag link set for the Team Associated RC18, Apex and Rival kits. Starting with the limited re-release of the GT-Z body for the classic Team Associated 18R and 1:18 Apex. The lid is all about performance with its high down force wing, sculpted fenders, sleek hood line and super low profile roof line. The GT-Z is designed with extra room in the wheel wells to eliminate wheel rub. The body comes clear and it fits 155mm to 165mm wheelbase cars.

Continue reading here

November 10, 2017

FX K501R 5-Port Racer Edition off-road engine

Coming from FX is their new K501R 5-port Racer Edition off-road engine. The power plant is designed for high-competition racing and features a silicone-filled crankshaft, Japanese-made premium front and German-made rear bearing and it made in at at FX in Slovakia. All parts are individually measured and inspected, and dimensions of all parts are recorded to ensure a full manufacturing and assembly record of every single part. Each engine includes a manufacturing certificate that records all the important serial numbers and measurements so that, at any time, all details of the production – including material batch, machine programs, responsible craft persons and production dates – can be traced back to their roots.

View the specifications here

November 10, 2017

Yeah Racing TT02 aluminium bumper plate

Adding protection and visual impact is Yeah Racing’s new aluminium bumper plate for the Tamiya TT02 touring car. The part is machined from high-quality aluminium, it comes blue anodised and with machined silver edge details. The brace is a direct replacement for the standard plastic part and it includes mounting hardware.

Source: Yeah Racing [yeahracing.com]

November 10, 2017

Andrei takes double Fxracing Indoor Series title

The final round of the 2017 UCS Fxracing Indoor Series was held recently. After an intense first two rounds, multiple national champion Jako Zsolt and current Mini-Z class champion Stroe Razvan were the main contenders. In the Buggy Stock 13.5T class, Andrei managed to take the victory after two heats, followed closely by Zsolt, Razvan and Liviu. Andrei then took the overall victory and was crowned Indoor Series Champion. In the 2WD Modified Short Course class, Andrei had strong competition from Zsolt but in the end, Andrei again took the victory and overall crown in this class.

Source: Team Associated [teamassociated.com]

November 10, 2017

SWorkz Apollo 1/8th Pro RTR electric buggy

Following a couple of teasers SWorkz have finally unveiled the Apollo 1/8th Pro ready-to-run electric buggy. The vehicle is based off of the S35-2E Pro kit with whom it shares most of its race-inspired features such as the 7075 aluminium chassis. The front and rear shock towers are made of 7075 aluminium and the buggy utilises the S350 BK1 Pro Kit big bore version 2.0 shocks with 4mm shafts. The drivetrain is equipped with high performance crown and pinion gears and oil-filled differentials provide traction and balance on multiple off-road surfaces while the pivot ball steering system gives the driver sharp and accurate feedback. The buggy also comes pre-adjusted with a race-inspired base setting for an easy driving feeling. The kit is rounded out by high-quality Hobbywing electronics such as the SWorkz SE-100 100A 1/8 BL speed controller and the buggy is powered by the S-ePower SP2150 BL 3670 motor. The set is rounded out by the SES-2S 12kg-cm Savöx-made steering servo with metal gears, a 2.4Ghz radio system, and a clear, pre-cut body shell.

View the features and more images here

November 9, 2017

Vaterra 1968 Ford F-100 Ascender BND

Coming soon from Horizon Hobby is the Vaterra 1968 Ford F-100 Ascender Bind-N-Drive 1/10th 4WD trail truck. It builds on the Ready-to-Run variant but comes without a transmitter and features working LED lights, an officially licensed Ford F-100 body and a caged back with real aluminium panels and spare tyre. The cab is painted in an era correct two-tone colour combo and the truck uses existing Spektrum DSMR/DSM2 radios. Other parts needed for completion include a 2S shorty LiPo pack with EC3 connector and a suitable charger.

View the features and more images here

November 9, 2017

Reds WR7 Diamond LTD & HE High Efficiency engines

Reds Racing have announced that their WR7 Diamond 3.5cc buggy engine is now available in two different variants, as LTD standard and new HE High Efficiency LTD edition. The WR7 LTD offers the classic high-power 7-ports powered band while the HE High Efficiency variant utilises a low fuel consumption system and smooth power band for improved drivability. In addition both engines come with the improved HCX carburettor that sports a redesigned low speed needle and a new 7075 aluminium fuel intake for improved tuning stability in extreme temperatures.

View more images here