November 13, 2017

JQRacing Black Edition Spec-Q 1/8th nitro buggy

JQRacing have introduced their factory-built Black Edition Spec-Q nitro buggy. The vehicle has the same specifications and features as the Black Edition kit, but instead of packaging the parts in the familiar bags for assembly by the customer, JQRacing build the car at the factory, to the proven August 2017 stock setup. The only thing left for the racer to do is to install an engine and pipe, and the electronics, and paint the pre-cut body. Even the throttle and brake linkages are built and ready to go. The Spec-Q car is intended to be ready to race, so thread lock has been applied, and camber, toe, and droop have been set correctly. The diffs and shocks are pre-built with the correct oils, getting racers on the track quickly.

View more images here

November 13, 2017

Tedeschi & Scaglioni win at CRNS Championship Rd4

The famous Mini Autodromo Jody Scheckter in Fiorano, Italy played host for fourth round of CRNS Championship, one of the last races in Italy before the winter break. In the Open 1/8th Nitro category it was Alberto Tedeschi who took home the win after a error-free drive. Following him on the podium was Emanuele Comoglio with Claudio Codazzi completing the podium another lap down.

Continue reading the report here

November 13, 2017

Tekno EB410 alloy shock caps & blank pistons

Coming from Tekno RC and made for the EB410 1/10th 4WD buggy are new aluminium shock caps and blank pistons. Starting with the shock caps, the parts are CNC-machined from high-quality 7075 aluminium and black anodised for a stealth look. They provide the utmost durability and consistency for the EB410 shocks, ensuring that the vehicle will withstand all the abuse. The caps come in pairs but do not include bleed screws or seals.

Continue reading here

November 13, 2017

Xray T4 lowered front suspension mounts

Xray have introduced new, lowered front suspension mounts for the T4 touring car. Machined from high-quality 7075 aluminium and coming orange anodised the mounts lower the hinge pins by 0.5mm compared to the kit parts for a higher roll centre setting and thus increased steering and traction in low to medium traction conditions. The 1-piece suspension hangers use the original composite suspension pin inserts and they are available separately.

View the FR mount here

November 13, 2017

Cavalieri takes Q2 as TQ is again decided on last lap

Having lost out in the opening round of qualifying with a mistake on his final lap that gave Michal Orlowski the TQ, Ryan Cavalieri got it done on his second attempt in China but it wasn’t without incident with the last lap again being a deciding factor. With Orlowski leading away the field again in Q2, the Schumacher driver would get it wrong at the first double and need marshalling allowing Cavalieri to lead the field from Bruno Coelho. With mistakes from almost every driver come the final lap it was Coelho who was on target for the TQ but running in close proximity to Cavalieri, a mistake by the American would balk the Xray driver and out of his rhythm lead the 4WD World Champion to having a larger mistake in the jumps section that left him with a 31.4-second lap handing Cavalieri the TQ and dropping him to third behind Lee Martin.

Continue reading this report here or view our complete event coverage here.

November 13, 2017

Arrowmax 1/10th off-road setup system

Arrowmax have introduced their new black and golden setup system for 1/10th off-road buggies. It sports the company’s signature honeycomb design and allows for easy and precise camber and toe adjustments thanks to ball-raced camber plates and the acrylic toe plate. Included with the set come thumb-screw wheel nuts that make strapping the vehicle into the setup system easy and effortless without the need for additional tools. The setup system is usable for most 2WD and 4WD buggies.

Source: Arrowmax [arrowmax-rc.com]

November 13, 2017

Samix 500ml nitro fuel bottle

Coming from Samix is their new 500ml nitro fuel bottle. The bottle itself is made from soft plastics and it utilises a CNC-machined aluminium screw-on cover for a perfect fit. The curved bottle neck is available in black or gun metal anodising and a air-tight rubber cap prevents spillage.

View more images here

Tonisport
Mibosport
LC Racing
VP Racing
T-Works