Red RC

November 12, 2017

Coelho leads the way China in early 2WD practice

With the first two rounds of free practice complete at the 2WD Offroad World Championships in China complete it is Bruno Coelho who leads the way. The Xray driver set the fastest 3-consecutive laps on his second run to top the times by a massive 2.5-seconds from Naoto Matsukura after posting a fastest lap of 24.788. With things much more closely bunched from P2 to P6, the five drivers separated by 3/10ths of second it was Jared Tebo, the last 2WD World Champion on dirt who completed the Top 3 ahead of Ty Tessmann, Joern Neumann and Dakotah Phend. With 4WD Champion Coelho fastest in contrast reigning 2WD Champion Spencer Rivkin, who celebrates his 19th birthday today in Xiamen, found himself 13th fastest.

Continue reading this report here or view our complete event coverage here.

November 10, 2017

Victosport VSR03 3.5cc nitro on-road engine

World Champion Products have introduced their new Victosport VSR03 3.5cc nitro on-road engine. Compared to the VSR02 the VSR03 has a different crankshaft timing, closing 5 degree earlier, which improves low end torque and also fuel efficiency. Also some extra work was carried out on the inlet of the crankshaft to create less turbulences while on the sleeve, the shape of the exhaust ports has been changed to make maximum use of the updated crankshaft timing. The engine is available now.

View the specifications and another image here

November 10, 2017

Xray XT2 2018 1/10th 2WD stadium truck kit

Xray have introduced the 2018 variant of their EOS and US Championship winning XT2 1/10th 2WD stadium truck kit. The main difference from the previous version is the inclusion of both carpet and dirt-specific gearbox setups in the kit, allowing to built the truck for high and low grip conditions right out of the box. Included are both laydown and standup gearboxes, a gear differential for high-grip and a ball diff for low-grip surfaces, as well as hard and medium compound suspension plastics, carbon and composite rear shock towers, and also two battery brace setup, upper brace mounts and a composite gear cover. Also part of the updated package is a new, short front chassis brace that allows to mount graphite chassis side guards to adjust chassis flex and an updated outer steering link mount increases reliability. The kit is rounded out by new lower shock absorber bushings for more precise shaft movement, new shock O-rings for better sealing and shock performance as well as new suspension pin washers that prevent the pivot shafts from moving. The kit will hit stores very soon.

View the features and more images here

November 10, 2017

T-Works driveshaft pin replacement tool

T-Works have introduced their new driveshaft pin replacement tool for 1/8th scale kits. It is usable with most 1/8th scale on-road, off-road and GT kits and the kit includes a ratchet screw driver, the tool body, two push shafts and it comes in a handy box that protects the tool during storage and transportation. The tool body accepts driveshaft ball sizes below 8mm of diameter and 2.8mm to 3.0mm diameter pins. All parts are also available separately for spares and repair.

View another image here

November 10, 2017

Yannic Prümper returns to Yokomo factory team

Yokomo have announced the return of Germany’s Yannic Prümper to their factory team. Yannic grew up using Yokomo cars and buggies and he now comes back to the iconic Japanese manufacturer following a stint with other brands. Prümper will use the BD8-2018, YZ-2 and YZ-4SF platforms in his upcoming campaign that will see attendances at events such as the ETS, EOS and major races in Europe. Yannic says:

I would like to thank Team Yokomo for giving again the opportunity to use their excellent products. It feels good to be back in that Team where my RC carrier started and I grow up. I‘ll do my best in the future to deliver the best results!

Source: Yokomo [teamyokomo.com]

November 10, 2017

SWorkz S35-3 series Pro Composite radio tray set

Coming from SWorkz and made for the S35-3 series of off-road and on-road cars is the Pro Composite radio tray set. Included are a composite plastic 1-piece radio tray that is decked out with carbon fibre receiver and battery compartment covers. While looking the part the matte finish lids also reinforce the whole assembly for improved chassis stiffness. An additional mounting position further strengthens the radio box area. The radio tray set is usable with the S35-3 nitro buggy, S35-3 nitro truck and the S35-GT nitro GT car.

View another image here

November 10, 2017

Exotek Mini Apex GT-Z body & drag link set

Exotek have released a limited edition run of their popular GT-Z Mini Apex Touring body shell as well as a drag link set for the Team Associated RC18, Apex and Rival kits. Starting with the limited re-release of the GT-Z body for the classic Team Associated 18R and 1:18 Apex. The lid is all about performance with its high down force wing, sculpted fenders, sleek hood line and super low profile roof line. The GT-Z is designed with extra room in the wheel wells to eliminate wheel rub. The body comes clear and it fits 155mm to 165mm wheelbase cars.

Continue reading here

November 10, 2017

FX K501R 5-Port Racer Edition off-road engine

Coming from FX is their new K501R 5-port Racer Edition off-road engine. The power plant is designed for high-competition racing and features a silicone-filled crankshaft, Japanese-made premium front and German-made rear bearing and it made in at at FX in Slovakia. All parts are individually measured and inspected, and dimensions of all parts are recorded to ensure a full manufacturing and assembly record of every single part. Each engine includes a manufacturing certificate that records all the important serial numbers and measurements so that, at any time, all details of the production – including material batch, machine programs, responsible craft persons and production dates – can be traced back to their roots.

View the specifications here