December 17, 2021
Zuykov, new brand of Russian TC driver Denis Zuykov have released amongst other things, this TC setup station. The idea behind this product is that the kit contains everything you need to set up your car including camber, caster, toe, EPA, droop and ride height. The scale for the camber setting is not at the bottom as usual, but at the top of the setup wheel. This scale is closer to the eyes and its location is much more convenient. Each setup wheel uses 2 bearings for a smooth movement and a scale at the top allows for minimal movement…
October 14, 2021
…With the included Spektrum DX3 radio, you’ll enjoy the superior range, response and interference resistance of exclusive DSMR® technology. Together with the installed Firma Crawler 120A Smart Sensored-Brushless ESC, it also comes ready to deliver the telemetry advantages of exclusive Spektrum Smart technology. Install a Spektrum Smart LiPo battery and you can view vehicle battery capacity on the transmitter’s voltage level indicator. Outfit the DX3 with the optional BT2000 Bluetooth module, download the free Spektrum Dashboard app to your smart device, and you’re ready to use more Smart real-time telemetry — without needing on-board sensors or modules. Source: Axial [axialracing.com]…
September 14, 2021
The Avid carbon fibre pit board is a perfectly flat surface for checking your vehicle’s setup and large enough for even 8th scale. It comes with a chamfered top edge, large rounded corners, matte finish and the Avid logo machined into the surface. Coming in at roughly 20 x 16″ / 495 x 395mm it will fit well in an Ogio 9800. Source: Avid RC [avidrc.com]…
September 8, 2021
Creation Model have started selling the stickers from their recently released Infinity team setup board individually. Not only can these be used for repairing your Infinity team setup board, but can also can be applied to your current setup board. Supplied in 430x290mm they come in two versions with the Infinity logo in vertical or in horizontal orientation. Source: Creation Model [creationmodel.net]…
August 24, 2021
KWR Engineering are pleased to introduce their brand new setup station specially designed for the GL-Racing GLA 4WD touring car. The station locks the car into position, allowing you to adjust front toe, left and right steering throw, and rear camber so your car tracks perfectly straight and handles to perfection. The station is extremely compact, with the setup wheels plugging into the main body of the setup board and the camber gauge holding everything in position. Using the setup wheels and camber gauge you can get a perfect rear camber setting of either 1.5 degrees, 2 degrees or 2.5…
July 21, 2021
RSRC are extending their line of products with this new carbon fibre setup board. Compatible for all 1/8 and 1/10 RC cars and trucks it has been produced from real 3mm carbon fibre, reinforced with fibre glass inside. Giving your pit area that racing/factory look, the board offers a flat surface to control all the settings of your RC car such as camber, geometry, ground clearance, droop etc. The board is finished off with the RSRC engraved logo and glossy finish. Source: RSRC [rsrc.biz]…
July 19, 2021
Mon-tech Racing have expanded their recently introduced BlacKollection line of cases and accessories. Starting with two glass plate setup boards for the 1/8 onroad and offroad categories, the version for onroad is 360 x 450mm while the slightly large offroad version is 405 x 550mm. Both plates come with a transport sleeve while the boards themselves sport a decal with handy measurement lines. Also new is a handy sleeve/case for transporting and safely storing your setup system’s toe measuring plate. Like the other items in the range, it sports the Mon-tech logo in white and has the Italian flag along…
May 13, 2021
Mon-tech have introduced their new bag trolley transport case. Using the same 3 box box they released previously this version has had the trolley added with it placed in a transverse position for greater stability during transport. The bag trolley features three comfortable rigid plastic drawers and two side pockets that can accommodate the setup-board and other objects. Source: Mon-Tech [mon-techracing.net]…
