Red RC

September 8, 2017

3DRC floating 25mm twin fan mount

Germany’s 3DRC have introduced their all-new twin fan mount for 25mm fan units. The 3-D-printed part is of a clamping design and it was developed to take two standard 25x25x10mm fans which makes for optimised cooling of the whole motor can when compared to single 30mm or 40mm fans while also ensuring a lower overall centre of gravity. The mount is best used in front of the motor and a large mounting patch ensures secure yet tweak-free mounting using high-quality double sided tape.

View another image here

September 8, 2017

Xray Racing Series Greek Rd6 – Report

Round 6 of the Xray Racing Series Greek was held at the Fanatix Racing Track in hot weather conditions. Again a good amount of sign-ups, despite the perfect beach party weather, made for close racing and in the Modified Touring class it was Papachristos with the TQ and win in all finals. A surprise 2nd place went to Nikolakopoulos with Diamadis in 3rd, making it an all-Xray podium.

Continue reading the report here

September 8, 2017

Tamiya TRF419XR – Preview image

Tamiyablog have released a first blurry rendering of the forthcoming Tamiya TRF419XR touring car. The follow-up model of the TRF419X was developed with increased corner speed and steering response in mind and it will feature a redesigned 2.25mm carbon fibre chassis and 2.0mm upper deck for optimised chassis flex while the front and rear anti-roll bars finally received ball-raced mounts for a more precise action. Also included will be a new centre pitch stiffener to fine-tune chassis flex, a LF battery balance weight and also two sets of shock towers for standard and the included TRF super short big bore dampers.

Source: Tamyiablog [tamiyablog.com]

September 8, 2017

Imbue RC8B3 HRC C-block & MBX7 +4mm shock mounts

Coming from Imbue are new optional parts for the Team Associated RC8B3 and Mugen MBX7 buggies. Adding to the company’s lineup of kit-specific upgrades is the Team Associated RC8B3 high roll centre (HRC) C-block. Made from eye-catching black oxide coated brass, the Imbue C-block adds 20g of weight in the most critical of locations for 1/8th scale buggies. Extra material around the pills increase durability, and the slightly slimmed down profile adds to the different visual appearance of the part.

Continue reading here

September 8, 2017

T-Works D817 aluminium centre driveshafts

Coming from T-Works and made for the HB Racing D817 buggy are aluminium centre driveshaft dogbones. Machine from high-quality material and coming with a black surface coating for wear and looks the parts are available as 97mm and 125mm variant and they sport laser-etched size markings for easy identification. The shafts are available in a set or separately.

Source: T-Works [rc-tworks.com]

September 8, 2017

Gary Huang wins at Chinese National Champs

The Chinese National Championship was held in Yongkang City, China in very hot weather conditions. Air temperatures of over 40 degrees Celsius and track temperatures of up to 65 degrees Celsius made for challenging racing conditions and in addition the drivers of the 1/8th Nitro On-road class had to cope with the relatively short and narrow track. In the main final it was Gary Huang with the best start from the 2 spot and he was heavily chased from the storming pack but ultimately Gary would prevail to take the win and with it the Chinese Youth Nationals title from Xu Zhanhao 2nd and Luo Wen Tao 3rd.

View the final results here

September 7, 2017

Ty Tessmann TQs & wins at Sikcross Race

The 2017 Sikcross Race was held at Southern California’s Pro-Line test track. The race was put on by Levi Jackson with Sik Track Designs and the format was different than the standard IFMAR qualifying, as it is setup more like motocross event with heads up gate starts. The first two rounds of Expert Nitro Buggy qualifying were won by Xray’s Ty Tessmann and after a resort, he was qualifying in the last one in a heads up race with Mugen’s Ryan Maifield who won his first two rounds of qualifying. The two had a really good battle, swapping positions back and forth a couple of times, but when coming out of the sand trap on the last lap, Ty hit a hole that he knew was there but he couldn’t see his car well due to the dust from the sand trap. Tessmann took a tumble and Maifield got by to TQ the final round. However Tessmann was able to take the overall TQ with Maifield qualifying 2nd overall.

Continue reading the report here

September 7, 2017

3DRC F6 front suspension flex arms

3DRC have introduced their new front suspension flex arms for the Team Associated F6 formula car. They are more flexible that the stock carbon fibre arms and improve the car’s handling over the stock parts. They also increase overall steering and look a bit more “scale-ish” than the standard sheet material arms. The 3-D-printed parts are 5mm thick for durability and they are available through 3DRC’s Shapeways store or select model shops.

View another image here