Red RC

February 13, 2017

Xray XB8 2017 1/8th nitro buggy kit

Following a series of teasing images Xray have finally revealed the 2017 variant of their popular XB8 1/8th nitro buggy platform. The follow-up model of the 2016 EFRA vice European Champion is based on a 3mm 7075-T6 aluminium chassis that makes for an updated weight distribution and it utilises a range of redesigned drivetrain and suspension parts to further up the overall performance and to make for optimised traction in a range of conditions. Starting up front the 2017 kit comes with more narrow front lower arms that sit in a more forward position while new trailing axle front steering knuckles increase forward traction, resulting in better handling. On top of this do improved steering pivot balls eliminate unwanted wheel lock at high steering angles.

Continue reading here

February 13, 2017

Kaja Novotny doubles at Lestr Cup Rd5

Round five of the Lestr Cup was held this past weekend. In the 2WD class, Xray’s Kaja Novotny started with a TQ in round one but contacts with slower drivers in Q2 and a DNF in Q3 only meant a P2 spot on the grid behind young Milan Mudra (Xray) and in front of Jiri Mara (Serpent). In the 4WD class things looked a bit different and Kaja made a clean sweep to grab the pole position from Milan Mudra and Zdenek Miksovsky (all Xray).

Continue reading the report here

February 13, 2017

Winter Jumps Series Rd4 – Report

Round four of the Finnish Winter Jumps Series was held at the new Äänekoski track in central Finland. The race day started with a domination of local Schumacher driver, Touko Silpola. He was the fastest driver in the practice rounds and in two of the four qualifying rounds as well. As Karri Salmela (Team Associated) got used to the track he got closer and closer to Touko and finally he was the fastest guy on the track. The battle behind Karri for the 2nd place was a really tight one. Touko Silpola, Jarno Siltanen and Juho Rajaniemi all had a shot on the podium and at the end Juho and Jarno would make up the podium behind Karri.

Continue reading the report here

February 13, 2017

Capricorn P1-235 Pro10 chassis kit

Italian company Capricorn have introduced the new P1-235 Pro10 chassis kit. Sharing most parts with the 200mm wide P1 car the 235mm Pro10 features a centre point bellcrank steering system with an in-line servo position, the kit comes with adjustable side links, an aluminium front stiffing rod and the chassis can accommodate optional tungsten weights to alter the weight bias and thus steering and overall traction. On top of this the motor pod allows to mount the speed controller in the motor area for even more weight distribution options.

View more images here

February 13, 2017

Michal Orlowski crowned GT12 World Champion

The inaugural GT12 World Championship was held this past weekend in front of a large public audience in Milton Keynes’ main shopping centre, The Centre:MK. The Reedy Race style event saw the drivers compete in 10 races with 8 to count towards the overall championship. The battle raged at the top between David Spashett, Ollie Payne and Michal Orlowski. All three drivers would have a perfect score of 8 wins each so the deciding factor would be the fastest race time over the weekend. Spashett was looking in pole position to take it with a blindingly quick time in the last race of Saturday in perfect track conditions and starting towards the front of the grid. The deciding race for Michal was his last one, starting from 8th on the grid, nobody really thought it was possible to beat Spashett’s time.

Continue reading the report here

February 13, 2017

RDRP RC8B3 aluminium rod end balls

Revolution Design Racing Products have released a set of aluminium rod end balls for the Team Associated RC8B3 series of kits. The parts are machined from aircraft-grade 7075 aluminium and come hard-anodised for wear, meaning they will last longer while not being prone to corrode in unfriendly environments. An inner hex portion makes installing and setup changes easy. On top of this the balls save about 1g per piece compared to the standard steel parts. The rod end balls come in sets of eight and they are compatible to all 3rd generation RC8 kits including the RC8B, RC8B3e, RC8T3 and RC8T3e.

View another image here

February 13, 2017

Mibosport Cup Rd4 – Report

The penultimate round of the 2016/17 Mibosport Cup was held at the Hotel-Sport in Hrotovice with 160 drivers entering the six electric on-road and off-road classes. In the Touring Modified class qualifying it was Dominic Vogl who was closely followed by Magnus Vässmar and Matej Dobnikar. In the triple A-mains Dominic didn’t give Magnus any chance for overtaking and so he won all three A-main legs right ahead of Vässmar. In the opening two finals, the third place finishes went to Matej Dobnikar while Oliver Havránek finished third in the final A-main. So overall Dominic Vogl took the win with Magnus Vässmar and Matej Dobnikar completing the podium.

Continue reading the report here

February 13, 2017

Tommygarage E817 carbon fibre shock towers

Coming from Italian company Tommygarage and made for HB Racing’s E817 1/8th electric off-road buggy are front and rear carbon fibre shock towers. Made in Italy, the parts are machined from 5mm high-quality carbon fibre and they are direct replacements for the standard alloy shock towers.

Source: Tommygarage [tommygarage.eu]