Red RC

July 1, 2016

Serpent SRX8 suspension arm replacement program

Following quality issues and too-easily breaking suspension arms, Serpent have announced a replacement program for the A-arms of the SRX8 buggy. The new suspension parts are made of a softer compound, resulting in more flex and more forgiveness in the event of severe crashes. The arms also underwent a redesign with beefed-up sections and also relocated set screws for the lower shock mount bolt. The revised front and rear suspension arms and shock bolts are available through the local Serpent dealers.

Read Serpent’s full statement here

July 1, 2016

Malin Karlsen takes win at Norwegian Nationals Rd3

Round three of the Norwegian 1/10th Electric Off-road National Series was recently held at the Oslo-based Hverven Raceway. In the 4WD Buggy class, Xray’s Malin Karlsen would bring home the day’s win with victories in A1 and A3, coming from the 3 spot on the grid. Yokomo team mates Eirik Andreassen and Daniel Kobbevik rounded out the podium in second and third respectively.

View the final results here

July 1, 2016

Avid 0.5mm to 2.25mm aluminium ballstud washer sets

Coming from Avid are several aluminium ballstud washer sets for on-road and off-road cars. Precision machined from aluminium, sporting a single chamfered design and coming black anodised the shims work with both M3 and 4-40 ballstuds and they are ideal for many setup purposes such as altering the ballstud height on hubs and shock towers. With their 5.5mm outer diameter they easily fit both on-road and off-road vehicles and they are available in 0.5mm, 0.75mm, 1mm, 1.25mm, 1.5mm, 1.75mm, 2mm and 2.25mm thickness, all of which come in 10-piece packs. Also available is as 12-piece pack of 0.5mm, 1mm and 2mm shims, including four of each type.

View the other shim sets here

July 1, 2016

Will Brinton wins at AE Summer Series Rd4

Round four of The Team Associated Summer Series at the Hobbyplex was last weekend, and the competition was stacked with heavy hitters from all over the mid-west with the race having a nice turnout with 194 entries. Will Brinton was an unstoppable force in Modified Racing Truck, taking the TQ in both rounds of qualifying, and a wire-to-wire win in the 8-minute single A-main with a near-flawless run.

Source: Team Associated [teamassociated.com]

July 1, 2016

Arrowmax 5200mAh 2S LiHV battery pack

Arrowmax have expanded their range of high-voltage LiHV battery packs, with the introduction of a 5200mAh variant. Built from high-performance 55C LiPo cells the pack offers an increased nominal voltage of 7.6V compared to the standard 7.4V and it can be charged to up to 8.7V or 4.35V per cell. The “outlaw” battery provides improved punch and runtime and it can also be handled like a standard LiPo pack and charged to the lower 8.4V while maintaining a flatter discharge curve and better punch characteristics towards the end of a run compared to a standard LiPo battery. The hardcase pack features split decals for clean fastening using tape and it utilises 5mm connector tubes.

Source: Arrowmax [arrowmax-rc.com]

July 1, 2016

T-Works 1/8th buggy droop & rebound gauge

Coming from T-Works is a droop and rebound gauge especially designed for 1/8th off-road buggies. Made from black and red anodised aluminium the gauge is of a common design and it will be fastened to the upper shock mounts during setup, allowing to estimate the droop and rebound rates when using the lower shock mount bolt as an index for the overall shock extension. The tool sports laser-etched scales with a range of 90mm up to 135mm on both sides and it works with most of today’s 1/8th buggies.

View another image here

July 1, 2016

Team Associated B6/B6D titanium screw kit

Team Associated have announced the release of a titanium screw kit for the B6 and B6D buggies. Including 90 screws in total, the lightweight fasteners make for significant weight savings compared to the standard steel screws while also improving visual impact thanks to their shiny appearance. The screw kit is usable for both cars and available now.

Source: Team Associated [teamassociated.com]

June 30, 2016

Samix SCX10 forward battery tray kit

Samix have introduced the forward battery tray kit for the Axial SCX10 vehicle. Machined from aluminium and coming with adjustable battery locators on both the left and the right hand side the tray makes for a more forward biased weight distribution, greatly improving climb performance. The part is designed to attach to the front shock plates, which also leads to a reinforced front shock mounting. Coming in five different colours the tray accept up to 170mm long battery packs.

View more images here