Red RC

October 27, 2016

Polish National On-road Championship Rd1 – Report

The opening round of Polish National Championship was held in Poznan during the Poznan International Fair. The event was run in several electric on-road classes with Touring ProStock attracting the most entries. The class uses ETS spec Muchmore 13.5T motors and Volante V5 28CP tyres and from the very first round of qualifying it was a very tight competition among three drivers; Michal Wojcik, Arkadiusz Smyk and Pawel Staszewski. After the qualifying rounds, which saw some incidents with slower drivers, the grid was set with Michal on the TQ followed by Arkadiusz and Pawel.

Continue reading the report here

October 27, 2016

Pro-Line Toyota Tundra TRD true scale bodyshell

‪Pro-Line Toyota Tundra TRD true scale bodyshell‬

Coming from Pro-Line is the Toyota Tundra TRD true scale bodyshell for 1/10th short course trucks. It replicates the real truck and completely transforms the look of any SCT. As usual the body comes made from clear high-quality polycarbonate and it includes window masks and a comprehensive decal sheet. For a proper fit the body requires Pro-Line’s extended body mount kit.‬

View more images here

October 27, 2016

TQ Gens Ace Championships – Report

‪TQ Gens Ace Championships – Report‬

TQ RC Raceway of Chino, California, SoCal’s only indoor carpet on-road track, was the site of the first Gens Ace Championships. The morning started early with practice then the formal lineup of cars and drivers. The race day was handled by track owner Sean Park and his main shop guy Ralph, both kept the race pace fun and flowing well with its 49 Entries and 10 heats spread between seven classes. The Sedan classes were full as usual in both 17.5 and 13.5. Drivers had to navigate the tighter than normal sweeper at the end of the straight and many would come in contact with the wall. Ultimately in 13.5 Expert Roel Espina TQ’d and would take a decisive win by a lap over the field. Brian Rutgerford would come in second from JD Ramsey third.‬

Continue reading the report here

October 27, 2016

Asian Onroad Championships Rd4 – Report

Round four of the 2016 Asian Onroad Championships was held at PYC Raceway in Hong Kong. This unique, historical event was unluckily forecasted to coincide with a level 8 typhoon that would shut down most of the Hong Kong’s working force due to high wind, rain, and flooding advisory. However, miraculously enough the racing Gods would shine upon the AOC and slid the typhoon quickly across the dense city without any major harm or damage. Racing resumed on Saturday and the thrill of the AOC was back in action. One of the biggest standout feature about PYC Raceway is the smoothness of the surface. The silky asphalt top mimicked the pleasure of driving on carpet balanced with perfect curbs that allow every driver to press hard and use the curbing without too much penalty. The layout had great flow mixed with high and medium speed corners that required a certain amount of stability to carry maximum corner speed. Although the layout was not extremely tricky, it was nice not having “luck” features or sections that would eliminate drivers from having close battles. The times were close.

Continue reading the report here

October 26, 2016

Pro-Line 105mm Ultra reservoir shock absorbers

Made for 1/10th crawlers and scale rigs are Pro-Line’s new Ultra reservoir shocks. They feature a fully functioning reservoir with a realistic divider piston and set screw for adjusting the shock rebound. The aluminium shock cap, shock body, reservoir, bottom caps, spring perch, shock end and steel shock shaft have all been CNC machined to exacting tolerances to achieve the highest quality shock imaginable and have been designed with scale realism in mind. X-Ring seals are used for both the main shaft seal and the divider piston for the smoothest and lowest friction seal possible for these 9mm bore shocks. From the top mounting hole to the bottom mounting hole the Ultra reservoir shocks measure out to be 105mm at full extended length and collapse down to 75mm for a full 30mm of shock travel. Just like Pro-Line’s popular PowerStroke shocks, the Ultra reservoir shocks feature dual rate Springs but these shocks come with an extra collar to adjust exactly where the dual rate springs transitions to single rate, similar to full scale shocks. Smaller hole pistons are also included for added tuning options. The Ultra reservoir shocks come mostly pre-built and do require oil to be installed by the user.

View more images here

October 26, 2016

Pro-Line Trifecta Lite 1/8th buggy rear wing

Pro-Line’s popular Trifecta 1/8th polycarbonate rear wing is soon also available in a Lite variant. The second generation wing was on show at the recent IFMAR 1/8th Gas Buggy Worlds and it is both lighter and stronger thanks to an innovative bent wicker that eliminates the need for heavy add on pieces and hardware. The three cut lines on the back of the wing are actually bend lines that have been designed to allow for easy bending of the Lexan to create a solid 1-piece wicker. This makes the back of the wing super strong while still allowing for wing flex in the event of a crash, which prevents the wing from shattering. Just like the original Trifecta, the Lite features three dimples that hang down on each side of the wing creating the golf ball aerodynamic effect that reduces drag at high speeds without affecting down force. The wing also includes the centre fin that adds more side stability to the car and increases the strength of the wing around the mounting holes. The Trifecta Lite comes pre-cut, so there is just the wicker height to be decided before mounting it to the car.

View another image here

October 26, 2016

Pro-Line 1/8 ElectroShot & 1/10 Positron tyres

Pro-Line have introduced the new ElectroShot 1/8th buggy and Positron 1/10th 2.2″ buggy rear tyres. Starting with the 1/8th scale offering, the ElectroShot made a first public appearance at this year’s IFMAR 1/8th Gas Buggy World Championships in Las Vegas. Coming from the mind of Ty Tessmann and designed to perform just like a HoleShot 2.0 while lasting significantly longer, the ElectroShot is combination of Pro-Line’s Electron and HoleShot tread designs with connected bars in the center where the heaviest tyre wear occurs. Connected bar-type tyres like Pro-Line’s new Positron have become the new standard for 1/10th buggy race tyres but pins are still the king of the 1:8 Off-Road. The ElectroShot begins to bridge that gap and test the waters with a hybrid Bar and Pin tyre. The ElectroShot will become available in a range of compounds including X2, X3, M3 and M4 and it includes blue closed cell inserts.

content

October 26, 2016

7075.it T4 inner brass battery stop

Italian company 7075.it have introduced an inner brass battery stop for the Xray T4 touring car. Machined from heavy brass material and attaching to the right layshaft mount the part acts as a battery stop to keep the LiPo hardcase from hitting the pinion gear or motor shaft. On top of this the part adds valuable 45g of weight in a very central part of the chassis. Using optional shims between the battery stop and layshaft mount allows to alter the weight distribution with 7075.it recommending two 2.5mm shims as starting point.

View more images here