Red RC

May 9, 2016

2016 Victorian State Titles report

Last weekend saw over 190 entries converge at the Keilor Club in Melbourne, Australia for the 2016 Victorian Titles sponsored by JConcepts Australia. Racers were treated to an outdoors track with a combination of high speed sections, elevation changes and a huge triple jump, with a natural clay surface that grooved up through the weekend providing great racing. The JConcepts 3D tyre was chosen as the control tyre for all classes. The weather was perfect for practice and 2wd day with sunshine and 26C temps, however mother nature won on Sunday with heavy rains cancelling the 4wd portion of the event. The entry list was stacked with 7 of the 2015 Nats A finalists in attendance and entries from all around Australia, including 2014 National champs Josh Pain and Chris Sturdy, as well as the Queensland young guns Mitchell Steer and Alex Bernadzik.

Continue reading the report here

May 9, 2016

Robert Pietsch wins Hot Race Nitro Cup

The Hot Race Nitro Cup took place last weekend in Gubbio, Italy, the host of this summer’s 200mm World Championships. Using the same handout Hot Race tires as those to be used at the Worlds a lot of drivers used the event to gain knowledge on the track and tires.Qualifying would see former 1/8th World Champion Robert Pietsch take the top spot in qualifying with his Picco powered Mugen, ahead of the Tesla powered Capricorn of Dario Balestri, with super fast French race Leo Arnold with his Orion powered Xray in 3rd. Unfortunately the rain arrived before the finals could be won and so the even was called on the qualifying results. In the two support classes it was Roberto De Cesare that won the 1/8th class, which was run in the wet, while in the 1/10th National class the win went to TQ man Federico Iezzi.

Source: Hot Race [hotracetyres.com]

May 9, 2016

Samix Axial Wraith titanium links

More new titanium links from Samix, this time made for the Axial Wraith crawler. Machined from high-quality materials and coming surface treated and laser-etched the parts not only add strength while reducing weight but they also make for some visual impact at the same time. The links are available for the front and rear upper and lower as well as for the steering system and they are direct replacements for the stock parts.

Source: Samix [rcsamix.com]

May 7, 2016

Exotek Mini 8ight Rally carbon chassis & top plate

Coming from Exotek and made for the Losi Mini 8ight Rally is a carbon fibre bottom chassis plate set as well as a carbon fibre top plate. Starting with the chassis set, the bottom plate is made from 2.0mm heavy-duty carbon fibre for durability and looks. It is much stiffer than the stock plastic chassis and it uses the Mini 8ight Truggy chassis side guards for a high-performance racer look. A machined motor area allows to use larger diameter motors and the chassis includes extra mounting holes for an optional gear cover and larger 1/10th low-profile steering servos. Also included comes a machined alloy nose plate and the chassis fits the Mini 8ight Rally and Desert Truck.

Continue reading here

May 6, 2016

Futaba T3PV 3-channel intermediate-level radio system

Futaba have introduced the all-new T3PV 3-channel intermediate-level radio system. It features a easy-to-read screen for menu programming, a super-fast response rate, and it utilises FHSS, S-FHSS and T-FHSS protocols, making it one of the most versatile surface system. The 3PV is available with a choice of included receivers such as the R304SB telemetry receiver or the high-voltage R203GF receiver that’s an ideal match for brushless ESCs and digital servos. Steering, throttle and steering dual rate digital trims are conveniently positioned around the wheel for easy access. The nearby switch is for programming 3rd channel functions if needed. The battery compartment is accessed through the transmitter’s base and can hold four “AA” batteries, NiMHs or a lithium pack. The T3PV becomes available very soon.

View more images here

May 6, 2016

Capricorn LAB F1-01 V3 carbon fibre chassis set

New from Italian company Capricorn comes the V3 carbon fibre chassis for the LAB F1-01 formula car. The chassis is cut from 3mm carbon fibre and it includes a dual ball-raced single bellcrank steering assembly that features adjustable Ackermann settings to fine-tune the steering response going in and coming out of the corners. Included in the set are also a steering servo mounts for longitudinal servo mounting.

View another image here

May 6, 2016

Tekno 3×2.1 flat/tapered shock pistons

TeknoTekno 3x2.1 flat/tapered shock pistonsRCTaperedPistons

Tekno RC have introduced new CNC-machined flat/tapered 3×2.1 shock pistons for the company’s line of 1/8th and 1/10th scale vehicles. The pistons excel when used with the NB48.3 and EB48.3 vehicles on bumpy tracks where less pack than the original 4×1.8 pistons is needed. They produce more side bite and make the vehicle more consistent on ruts and bumps. The pistons are made from self-lubricating Delrin material and they utilise a new tapered shape. The CNC pistons have triple 2.1mm holes and the total piston hole area is 10.4mm² and they can be used with all Tekno RC and other vehicles that use 16mm bore shocks.

Source: Tekno RC [teknorc.com]

May 6, 2016

Fankhauser & Seiler win at Swiss Racing Cup Rd2

Round two of the Swiss Racing Cup was held at the MRTM Lostallo track and in the 1/10th Touring category it was Patrick Fankhauser (Xray) who brought home the win from second placed Philipp Bühler (Xray) and Serpent driver Marco Licci in third. The Xray duo of Christian Lehnherr and Peter Koller would round out the top 5.

Continue reading here