Red RC

September 23, 2015

Pro-Line B5M Predator & Flow-Tek Fusion SC bodyshell

Pro-Line have introduced two new bodyshells, the Predator B5M buggy body as well as the pre-cut Flo-Tek Fusion short course truck bodyshell. Starting with the Predator, the design was originally developed for the RC8B3 and has now been scaled down to fit perfectly on Team Associated’s mid motor 1/10th 2WD buggy. The Predator features a sleek and low-profile front cab and a rear section the will fit any transmission configuration including 3-gear and laid down styles. It takes design features from both Phantom and Type-R designs to create a whole new look with balanced performance in any condition. As usual the body comes clear, including window masks and a decal sheet.

Continue reading here

September 22, 2015

Team Associated B5 series FT aluminium gear cover

Coming from Team Associated and made for 5th generation 1/10th off-road vehicles such as the B5/5M, T5M and SC5M is the Factory Team aluminium gear cover. It replaces the cover found in the optional gear diff kit and the aluminium material will prevent warping, providing a tighter seal than the current cover, and longer run times between maintenance.

Source: Team Associated [teamassociated.com]

September 22, 2015

Alessandro Remia takes Italian F1 buggy title

The Italian 1/8th Buggy Championship was held this past weekend. In the F1 class Alessandro Remia had a tough final as he looked to secure an easy win until 15 minutes to go when he ran out of fuel several times due to a faulty fuel gun. But at the end a fourth place was enough for Alessandro to grab the overall F1 category title. Francesco Piccinetti came in second at the final round while Giuseppe Tescione rounded out the podium in third.

Source: Xray [teamxray.com]

September 22, 2015

JQRacing THENew Low RC shock towers

New from JQRacing and made for the THECar line of 1/8th buggies are updated front and rear aluminium shock tower. The THENew Low RC tower are featuring less shock and link mounting holes and while there are less holes than stock, the new towers include new shock mount holes, and new link locations that the team has been drilling by hand. The new link positions help to make the car easier to drive and less likely to flip over, allowing to drive the buggy more aggressively while still maintaining control.

Source: JQRacing [jqracing.com]

September 22, 2015

Sebastian Recio wins Argentine 1/8th On-road Champs

The Argentine 1/8th On-road Championship was recently held in Cordoba in several classes. In the 1/8th “Free” category Sebastian Recio came out successful from second placed Juan Pablo Golobic. Natalio Maringolo in third would round out the podium. In the “3 Transfer” category it was again Sebastian who ended on top of the class while Agustin Cutini and Emilio Lanzilota came in second and third respectively.

View the other podium here

September 22, 2015

Reflex Racing RR12V2 1/12th scale pan car kit

Following the recent introduction of the RSD RR12V2 conversion kit, Reflex Racing now also released information on the RR12V2 full kit. The car is based on a new chassis made of 2.3mm quasi weave carbon fibre for improved stiffness, a lower weight and a lower centre of gravity. An updated pod geometry with the pivot 2mm further forward provides more corner speed and less lift while allowing for more aggressive settings. Also new is the battery securing systems that provides tape-less transverse of inline mounting of the 1S pack. Another new feature is a revised side spring placement with optional, more in board positions to aid in a softer roll control for high bite conditions. Lastly, the new front end is Reflex Racing’s icing on the cake. A new, light weight double A-arm front end is included in the kit. This system is incorporating a suspension system that is 10 to 15g lighter than the traditional AE front ends, it is easier to adjust and versatile enough to run as a double A-arm or traditional reverse McPherson strut. The car will be offered in two trims, as full kit minus electronics, wheels, tires, servo saver and fluids and also as full conversion including RSD front end. The latter needs a donor car for diff, tubes, shock, and ball ends.

View more photos here

September 22, 2015

Mickael Brandt wins at Swedish On-road Cup

The final round of the Swedish On-road Cup was recently held at the MK Eskils track, host of next year’s EFRA 1/8th On-road Euros. The qualifying of the 1/10th 200mm class had Mickael Brandt coming out fastest from second placed Nicolai Hvid and third placed Jose Castro. Before the start the TQ holder ran into trouble due to a dying transmitter battery but a quickly borrowed pack got him on track in time. The start then went ok for Mickael but his nerves got the better of him and he almost got caught by the field. Mickael managed to cool down and he began to pull away quickly and some 25 minutes into the race he had managed to open a gap of several laps to the second place driver. A quick pit stop for tyres didn’t change much and while conserving the lead Mickael lost focus a bit and clipped a curb which cost him the 1st gear on his car. During the repair his pit crew forgot to refuel and so he soon after flamed out but he still had a 3-lap lead only to clip another curb which send his car on the roof. The following flameout cost Brandt the lead that was promoted to a happy Jose. While chasing the leader Mickael scored the fastest lap of the race with a 30.7 and after the final pitstop both were racing tail to bumper. With a pass on the straight Mickael regained the lead that he was able to conserve it until the end to take the win from Jose Castro and Hans Elmerfors. Rune Stokka and Ake Törnros rounded out the top 5 result.

Source: Xray [teamxray.com]

September 22, 2015

Schelle B5M rear pull hinge pins & SC5M protector

Schelle Racing Innovations have new option parts for the Team Associated B5M and SC5M off-road vehicles available. Starting with the buggy part, the new rear pull hinge pins are the perfect complement to the aluminium arm mount D Schelle released in early this year. With some slight trimming to the B5M plastic rear bumper racers can remove the carbon fibre rear cap and remove the rear hinge pins and arms without taking any screws off of the chassis bottom. The pins are 3.5mm diameter chrome steel with a hard Titanium Nitride coating. The pins fit all B5M, B5M Factory Lite, T5M, and SC5M vehicles equipped with the Schelle arm mount D. Also new is the chassis protector for the SC5M short course truck. Being an authentic UpgradeRC product the decal is printed on quality 18 mil thick vinyl with aggressive adhesive and each package contains the chassis protector and two replacement rear skids.

View more photos here