Red RC

September 2, 2015

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent’s Spyder SRX4 1/10th 4WD was first seen in prototype stages a while ago and the kit is finally available for the public. The buggy, that was steered to the runner-up spot at the 2015 EFRA Euros, is based on a 2.5mm carbon fibre chassis and it features a dual-belt drivetrain with fluid-filled gear differentials, a 3-pad slipper clutch, front clicker unit and a 3mm aluminium motor mount. The front part of the drivetrain is housed in a central spline that also makes for a strong chassis backbone. The car is designed to use saddle pack batteries, it utilises a low profile steering servo and it comes with 4mm carbon fibre shock towers, big bore shock absorbers and the kit is rounded out by a mid-cab design bodyshell, high downforce wing and a set of white disc rims.

View the features and more photos here

September 2, 2015

DJ Apolaro wins 200mm class at Great Lakes Challenge

Last weekend’s Great Lakes Challenge saw Capricorn’s DJ Apolaro (Capricorn/Novarossi) walking away with the win in the 1/10th 200mm Sedan class. Already very consistent in qualifying DJ was able to pretty much control the main final thanks to a good pit strategy, swift refuelling and a tyre-saving drive to take the win in front of Paolo Morganti (Serpent/Picco) and Ralph Burch (Xray/Max Power).

Source: Novarossi [novarossi.it]

September 2, 2015

Capricorn LAB F101 formula kit – Preview images

Italian company Capricorn, known for the successful 1/8th and 1/10th nitro on-road cars, will soon have the LAB F101 1/10th scale formula car available. The vehicle is based on a narrow carbon fibre chassis and it will feature a front suspension with lower carbon fibre and upper composite arms, the servo mount is designed for low-profile servos and the battery compartment takes both shorty and standard-size LiPo batteries by the look of things. In the rear the F101 sports a large volume centre shock, a single tube damper and a lightweight aluminium motor pod with a sliding-design rear axle mount. More information and images should become available in time for the release.

View more renderings here

September 2, 2015

VP-Pro 1/8th off-road Lexan wing

VP-Pro have introduced a polycarbonate rear wing for 1/8th off-road vehicles. Made from 1.5mm Lexan material the wing offers a very low weight and a high durability. The design allows to fine-tune the downforce and drag created by the wing by adding or modifying the included gurney flap and by adding or leaving away the optional side dams.

Source: VP-Pro [vp-racing.com]

September 2, 2015

Teamsaxo T4 carbon fibre chassis & upper deck

Teamsaxo have a new carbon fibre main chassis and top deck available for the Xray T4 touring car. Starting with the chassis, the part is cut from 2.2mm carbon fibre and due to the design and material used the main plate will twist more in the centre, moving away flex from the bulkhead area for a more stable car at high speed. Also new is a 2.0mm upper deck whose standard angle layup carbon fibre will make for improved flex and thus it is recommended for the use on low to medium grip asphalt tracks.

View the upper deck here

September 2, 2015

Balestri & Redaelli win at Novarossi Trophy

The Miniautodromo Jody Scheckter in Fiorano, Italy played host for the 2015 Novarossi Onroad Trophy. The event attracted most of the fast Italian nitro on-road drivers and in the 1/8th class it was Dario Balestri who came out successful from Andrea Pirani and Mattia Collaveo in second and third respectively. In the 1/10th 200mm class Luca Redaelli brought home the win from Alessandro Balboni and Manuel Strano.

View the 200mm podium here

September 2, 2015

110% Racing limited edition Navy Grid tee

110% Racing limited edition navy grid tee

110% Racing have the limited edition Navy Grid tee up for grabs. The 100 percent cotton T-shirt features the 110% logo in a grid pattern on the upper left chest area, a single logo on the right sleeve, and the “Nothing Less.” slogan across the back, all printed on a high quality Hanes tagless shirt.

Source: 110% Racing [race110.com]

September 2, 2015

Robert Batlle doubles at Spanish Italian Job encounter

The Spanish edition of the The Italian Job Race was held in La Nucia this past weekend. The event attracted both local talent and guests from abroad, such as Reno Savoya and Alex Zanchettin. In the Nitro A-main Spanish frontrunner Robert Batlle battled it out with Reno Savoya and Bryan Baldo with the better end for Robert who won the final in front of Reno and Bryan. Elsewhere in the E-Buggy class it was again Robert who found himself on top of the game by taking the win in A1 and A2 to grab the second title of the weekend.

View the Nitro Buggy A-main result and E-Buggy podium here