Red RC

October 15, 2014

Xray Primary Sponsor of EOS

Xray are excited to announce that they will partner with Uwe Rheinard & Scotty Ernst as a primary sponsor of the European Offroad Series (EOS) for the 2014/2015 season. The Xray factory team consisting of Juraj Hudy, Martin Bayer, Martin Wollanka, Miguel Matias, Mike Gosvig, Lorenzo Crolla & their young talent Malin Karlsen will be available during the entire season at all the races to provide technical and set-up support. As with previous years the spare parts availability and service will be arranged at every event by the national distributor so look out for the Xray service centre loaded with all spare parts under the Xray tent, which is also where Xray drivers can collect their free promo package at each race.

Source: Xray [teamxray.com]

October 15, 2014

Hudy 10-compartment parts box

Hudy have a new 10-compartment parts box available for the storage of small parts such as screws, nuts and washers. Measuring 132x62mm the semi-transparent box offers a compact size and quick access and it comes with high-quality Hudy graphics.

Source: Hudy [hudy.net]

October 15, 2014

Schumacher SupaStox GT 1/12th kit

Schumacher introduce the latest incarnation of their championship winning SupaStox 1/12th scale GT12 kit, the SupaStox GT. Coming in two versions, with a S1 fibreglass chassis and rear differential or based on a carbon fibre chassis with fixed axle, the car is meant to be lighter, stronger and faster than ever. Included in all versions is a new low centre of gravity alloy motor mount and a pivot ball rear end with front to back tube damper for improved bump handling while new front and rear ride height adjustment options allow for improved fine-tuning. The car accepts a wide range of industry-standard bodyshells and electronics and it comes with pre-glued contact foam tyres front and rear.

Click here to view the features

October 15, 2014

Highest RC F1 pan car servo

Highest RC introduce a servo specially designed for the use in formula chassis kits. The low-profile servo features an aluminium case with plastic lower bottom part and it comes without the standard mounting lashes as these are normally cut away in many formula chassis to allow for an upright mounting position. The high-voltage compatible servo is usable from 4.8V input on and offers up to 0.06s of transit time with a torque as high as 8.3kg-cm. A coreless motor makes for efficient operation and the servo is compatible with Sanwa’s SSR mode.

Click here to view a photo of the installed servo

October 15, 2014

Martin Bayers doubles at Czech 1/8th buggy champs

The 4th and final round of the Czech 1/8th off-road national championships was held last weekend at the RC Club Radotin track in Prague. Considered to be the country’s best off-road track the club did an amazing job preparing the track and the surrounding facilities. Martin Bayer took the TQ in both the 1/8th Nitro and E-Buggy class and he went on to win both categories and also the national titles despite missing one round due to the German nationals.

Click here to view the final results

October 15, 2014

WRC lightweight F1 bodyshell

WRC now offer a lightweight bodyshell for the F-One formula kit. Made from clear high quality material the body offers the same design as the current F-One shell but it is 20 percent lighter to save some valuable weight.

Source: WRC [wrc-racing.com]

October 15, 2014

Capricorn V3 standard & big bore shock absorbers

Italian company Capricorn introduce the new V3 shock absorbers for their EP and GP kits. The shocks feature a redesigned lower cartridge that allows to use dual O-rings for better sealing or a single O-ring for a smoother operation with less friction. A new piston rod design holds the pistons in place using a screw for easier setup changes and a fixed piston that does not rotate within the shock housing. The 1/10th shocks are available as 52mm, 55mm and 57.5mm long variant while the 1/8th related shocks come in 57.5mm an 60.5mm length. Also new are 50 shore and 60 shore volume compensator membranes for further fine-tuning.

Click here to view more photos

October 15, 2014

Team Orion VST2 Sport brushless motor

Team Orion introduce the new VST2 Sport brushless motor. Developed by Oscar Jansen the sport version of the World Championship winning VST2 Pro is of a fixed timing design, making it ideal for spec racing classes. The motor builds on a machined aluminium can, it is of a simple and reliable deign and large venting holes make for efficient cooling and low running temperatures even in high ambient temperatures. The VST2 Sport is available in 6.5T to 8.5T modified and 10.5T to 21.5T stock windings.

Click here to view the features and more photos