Red RC

April 10, 2015

Xray NT1’15 200mm nitro on-road kit

Xray NT1'15 200mm nitro on-road kit

Xray officially introduce the all-new NT1 2015 Spec 1/10th 200mm nitro on-road kit. As explained by Martin Hudy in our exclusive interview and making-off feature, the car builds on a redesigned backbone in the form of aluminium front and rear bulkheads and a new main chassis plate. The 2015 Spec car makes use of 7075-T6 aluminium bulkheads, layshaft holders and suspension mounts to adapt to the latest set of rules that see harder and larger diameter “hand out” tyres used at many races.

Click here to continue reading

April 10, 2015

JConcepts LiL Chasers 1/10th SC tyre

JConcepts’ new LiL Chasers for 1/10th short course trucks rely on a tread scaled down from the original Chasers. Small, rectangular lugs which are angular in multiple directions give the SCT tyre the ultimate bite for outdoor racing. The tyres have a lower, closer lug arrangement which gives responsiveness and bites in medium, high and low grip conditions. The wet and dry condition tyre has small recessed cuts in the top of the tread for extra edges and increased formability over terrain. The centre overlapping bar treatment increases durability in the highest wear region of the tyre. The super soft green compound will allow the tyre to grip in the most demanding conditions while offering great durability. The tyres include the Dirt-Tech insert and they come as tyre including insert or pre-mounted on SCTE-compatible 12mm hex Hazard wheels.

Source: JConcepts [jconcepts.net]

April 10, 2015

Serpent Cobra 2.2 1/8th nitro buggy kit

Following yesterday’s introduction of the updated Cobra-Be Serpent now also release information on an upgraded variant of the Cobra nitro buggy. The version 2.2 includes new V2 rear uprights, V2 wheel axles, 98mm driveshafts, wheel axle rubber boots and a 2.3mm front anti-roll bar. Also included with the latest version come the long wheelbase Plus 4 aluminium chassis, a longer rear aluminium chassis brace, a longer rear centre driveshaft, hard coated shock caps and 14 degree aluminium C-hubs. The kit is available from now on.

Click here to view more photos

April 10, 2015

WRC 1/10th touring car rubber tyres

Italian company WRC have new 1/10th touring car tyres available for carpet and asphalt applications. While the carpet tyres come in a single compound the asphalt-specific tyres come in a soft and hard rubber mixture to adapt the car to different track conditions. All tyres come pre-glued on a white disc rim and in a handy storage and transportation box.

Source: WRC [wrc-racing.com]

April 10, 2015

Muchmore Fleta ZX Sting Outlaw BL stock motors

Muchmore introduce their new line of Fleta ZX Sting “Outlaw” brushless stock motors. Offering a patented sintered Neodymium rotor design and short stack stators the motors are meant to offer up to 30 percent more power compared to a legal motor. Available as 13.5T, 17.5T and 21.5T variant all motors are built using the Flow-Max II all-aluminium can for improved airflow and cooling and they sport a distinctive red anodized aluminium timing plate for even better heat dissipation. The motors also feature Grade 5 bearings, silver-plated heavy duty solder tabs and sensor connector protective guards. The outlaw variants are designed for “open” stock racing as they do not comply with the current IFMAR, ROAR, BRCA or JMRCA rules.

Click here to view more photos

April 10, 2015

Schumacher Cat K1 Aero forward motor conversion

Schumacher introduce a forward motor conversion for the CAT K1 Aero 4WD buggy. It is to be used on very high-traction surfaces such as high-bite astro and carpet to improve the cars response and laptimes. The conversion shifts the motor 18mm further forward, this allows the use of shorty batteries as well as standard saddle packs and it enables the electronics to be in a much neater and tighter cluster, giving better chassis balance. The steering mounting system has changed with the steering now mounted from the new thicker 3mm top deck. This also incorporates new camber link positions, which also can improve the car on high grip surfaces. With the steering mounted off the now 2.5mm chassis it allows room for the use of a fan to cool the motor in high load conditions.

Source: Schumacher [racing-cars.com]

April 10, 2015

VBC D07 aluminium spool & 1.6mm upper deck

VBC Racing have two new option parts for the Wildfire D07 touring car available in the form of a lightweight aluminium spool and a 1.6mm carbon fibre upper deck. Starting with the spool, the CNC-machined part is made from lightweight yet durable 7075 material and it weighs in at only 3.8g. The red anodised part replaces the standard composite housing and it fits all Wildfire and Ghost series cars. The second new part is the 1.6mm carbon fibre upper deck especially made for the Wildfire D07. The top deck is cut from a thinner material for increased torsional flex which can be helpful especially on low-grip tracks.

Click here to view more photos

April 10, 2015

Birinyi & Bajusz win at RCProf Challenge Rd6

Round 6 of the Hungarian RCProf Challenge saw Janos Birinyi taking the TQ in the Touring Car Stock class from teammate Zsolt Kalnay. In the first final Janos brought home an easy win only to have a mixed second leg meaning the overall win would be decided in the third and final A-main. In the third leg Janos got everything together and he finished in 1st place to take the overall win from Mate Toth and Zsolt Kalnay. In the 13.5T Stock Buggy class Zsolt Ifj. Bajusz took the win from Dani Sagi and Bence Erdödi.

Click here to view the Buggy podium