Red RC

March 11, 2015

Gravity RC All-Star Series – Report

Over the course of late Fall 2014 through late Winter 2015, the Gravity RC All-Star Series was held at The Track at Harbor Hobbies, the premier carpet track in Northeast Illinois. Multiple classes were run, and drivers from Wisconsin, Illinois, Missouri, Iowa, Ohio, Indiana, and Michigan made the trip, including Gravity RC’s Paul Lemieux as the title sponsor for the series. Gravity G-Spec Type C pre-mounted carpet tires were the spec tire for Stock Touring, and the Gravity USGT pre-glued tires were spec for the USGT class. USVTA ran the tires specified by the class rules. Racing was tight in all three of the competitive classes throughout each weekend. Points were awarded across five races throughout the Series, with the best 4 out of 5 points going toward a total to crown each class Champion.

Click here to continue reading the report

March 11, 2015

Team Durango DESC10 4WD 1/10th SC truck

Following a first teaser image Team Durango now released a more detailed photo of the DESC10 4WD short course truck. The newly designed kit looks a lot beefier than the popular and race-proven DESC410 with its 1/8th scale-ish suspension components, shock absorbers and 17mm wheel adapters. So far no features or specifications are known but the kit is meant to be on its way to the distributors and we await details on the truck, as well as the three new 1/8th vehicles, very soon.

Source: Team Durango [team-durango.com]

March 11, 2015

Capricorn LAB TE03 chassis & bulkhead brace

Capricorn have new option parts for the LAB TE03 1/10th electric touring car available in the form of two different main chassis plates and a reinforcement brace for the bulkheads. Starting with the chassis, new are slim aluminium and carbon fibre lower plates that allow to fine-tune the car to different amounts of traction. Both are 83mm wide which prevents them from scrubbing too much during hard cornering with the aluminium chassis being best suited for high-bite tracks while the carbon fibre variant should excel in lower grip conditions. Also new is a carbon fibre reinforcement plate for the bulkheads, a part that allows to stiffen the bulkheads, again in a wake to adjust to the overall traction available.

Click here to view the other new parts

March 11, 2015

BRCA GT National Series Rd3 report

Walker-Catchpole wins at BRCA GT National Series

The third round of the BRCA GT National Series was held at the Killamarsh Sports Centre and was hosted by the SWIFTS club. The club set out a well-conceived track layout which included a flowing infield and a long straight, which required some serious thought by the drivers when deciding what gear ratio to run. In GT12 the field was joined by a couple of experienced LMP12 drivers, for their first taste of GT12 National racing, who were hoping to qualify in the A-final. This was no mean feat for them, as the standard of driving at the top end was highly competitive and qualifying times were extremely close. In fact throughout the field, there were some very close battles in qualifying and the finals.

Click here to continue reading

March 11, 2015

JJ Wang joins Matrix Racing Tires

Matrix Racing Tires confirm the signing of Chinese/American top driver JJ Wang to their 2015 factory team. Racing for Mugen and Novarossi in Nitro 1/8th scale and 1/10th scale classes, the 17-years old is a former Chinese National Champion in both classes and he is backed by a successful 2014 season when he managed to bring home a top 5 finish at the 200mm Worlds in Thailand and a very respectable 15th place at the 1/10th Electric Touring Car Worlds held in Florida.

Source: Matrix [matrixtires.it]

March 11, 2015

Raphael Jason Nugroho re-signs with Xray

Xray have announces that young and talented off-road racer Jason Nugroho from Indonesia will continue to race with the Slovakian company in 2015. Jason is a long time Xray supporter and he is a regular podium finisher at all major Asian off-road events. Jason says:

I’m very happy to be part of official Xray team. Xray always make the best quality parts that it make me feel confident to compete at every national and international race. I want to say Thank You for all the supports and the friendships that have been made. I look forward to race with Xray in the next season.

Source: Xray [teamxray.com]

March 11, 2015

Oliver Mack renews with Shepherd

Shepherd have announced that Oliver Mack will be a part of the company’s factory team for another year. The former World Championship finalist, European Champion and multiple German Champion had a great 1/8th scale campaign in 2014 by finishing the ENS in 3rd position overall. 2015 will be Oliver’s 7th season for Team Shepherd and he plans to attend the German Championship, the European Championship in Ettlingen, selected ENS events and the World Championship in Brazil. Oliver had the following to say:

First of all I would like to thank Team Shepherd for the long and successfully time we have already had. I’m really looking forward to racing another great season in this nice team. Last weekend we hit the track the first time for this year and the laptimes and feeling with the Velox V8 “EC” 2015 were very promising for the upcoming season.

Source: Shepherd [team-shepherd.com]

March 11, 2015

Scorpion thread cutter tools

Scorpion introduce two new high-performance thread cutter tools, the thread die and thread tap driver. The thread die driver comes in the three dimensions of M2, M2.5 and M3 and it cuts threads on rods or blank screws while the thread tap drivers help to cut threads into newly drilled holes and they can also be used to rethread damages threads. The thread tap driver comes as M2x0.4mm, M2.5×0.4mm, M3x0.5mm and M4x0.7mm variant with both tools being made from high-quality HSS high speed steel for durability and precision while the tool handles sport Scorpion’s signature gold and black colour.

Source: Scorpion [scorpionsystem.com]