Red RC

July 30, 2014

JConcepts Dirt Webs red compound

JConcepts popular Dirt Webs tyre is now also available in the “soft outdoor” red compound that debuted at the 2014 Cactus Classic. The new compound works alongside the blue, however, it is much more friendly in warm/hot conditions as seen at outdoor events, providing more stability and better reaction for quicker laps. The red is not a replacement for any compound but used as an alternative in warm and hot weather conditions and abrasive tracks it is available for the 2WD front, 4WD front and 2WD/4WD rear Dirt Webs.

Click here to view more photos

July 30, 2014

Ramon Sigrist wins at Mexican off-road nationals Rd3

The 3rd round of the Mexican off-road nationals was held in Pachuca Hidalgo, near Mexico City. A total of 89 drivers attended with Ramon Sigrist taking the win in the nitro truggy class while his Novarossi teammate Arturo Navarro came in 3rd.

Source: Novarossi [novarossi.it]

July 30, 2014

Jeff Hamon wins at 2014 Queensland State Titles

The 2014 Queensland State Titles were held last weekend at the QRCCRA club located in Brendale, about 15 minutes from Brisbane. In the 1/10th 200mm Nitro Sedan class Jeff Hamon came out successful with his Novarossi-powered Mugen to take this year’s title.

Source: Novarossi [novarossi.it]

July 30, 2014

Martin Wollanka wins Austria Cup

The recent Austria Cup was held on the small and technical track of Jaidhof in the three 1/8th off-road classes of nitro buggy, nitro truggy and E-buggy. After qualifying Rene Kargl secured the TQ in the nitro buggy class with Thomas Dieselbacher and Martin Wollanka in tow. After the semi-finals Kargl was still on the top spot while Dieselbacher and Wollanka swapped positions, handing Wollanka the 2nd spot on the grid.

Click here to continue reading the report

July 30, 2014

KM H-K1 Evo3 fuel tank

KM have a new option part for the H-K1 Evo3 200mm nitro on-road car available in the form of this fuel tank. It offers a stronger spring for the cap, a new internal fuel filter and a reinforced tank body and cap mount. Also new is a cap pivot pin that now sports an E-clip support. The tank is a direct replacement for the stock part.

Source: KM [km-rc.com]

July 30, 2014

Yokomo BD7 ETS Champion limited edition kit

Yokomo Europe introduce the limited edition BD7-2014 ETS Champion kit. Based on the standard Black Edition BD7-2014, the kit is issued to celebrate the 4th back-to-back Euro Touring Series title and it comes with a load of option parts such as C-clip front double joint driveshafts, rear aluminium 44mm dog bones, a graphite front body mount support, a special black colour aluminium servo mount, a titanium-coated main gear shaft, a super-precision bearing set, aluminium belt tension adjustment cams and hard-coated self-lubricating shock ball ends. The kit, that is limited to 25 pieces, is rounded out by a titanium turnbuckle set, a luxury packaging and a transportation bag, both of which are marked with a serial number. The kit will become available from beginning of August. Please note that above image shows the standard edition car.

Source: Yokomo Europe [teamyokomo.eu]

July 30, 2014

Team C infrared temperature gun

Team C now have an infrared temperature gun available. The device offers a large LC display and a specially shaped sensor head that helps to insert the gun into the engine’s cooling head for precise temperature measurement in the glow plug area. While being of good use for nitro racers, the gun also comes in handy to control the temperature of electric motors and speed controllers as well as tyres and electric equipment. The gun comes with a handy Team C branded transportation bag.

Source: Team C [teamcracing.net]

July 30, 2014

RB Energy 100C hardcase LiPo battery packs

RB have two new Energy range high-performance hardcase LiPo battery packs available in the form of a 2S and a 4S pack. Both are made from 6400mAh cells with 100C discharge rating and they come in plain black cased with chrome RB stickers. The 2S pack measures 138x46x25mm and is equipped with 4mm connector tubes while the 4S pack measures 137x46x49mm. The latter is ideal for 1/8th applications and comes pre-wires with a balancer connector and a high-currrent Deans-type T-plug.

Click here to view the 14.8V battery