December 15, 2014

Date change & confirmed surface of 1/10th Buggy WC

Date change & confirmed surface of 1/10th Buggy WC

Following some controversial discussions about the surface of the 2015 1/10th Electric Buggy World Championship at the Yatabe Arena in Japan IFMAR now released the final decision following a vote to update IFMAR’s existing “surface” rule that previously saw dirt as the only allowed track surface. The new rule, that was accepted by three of the four IRMAR blocks, now allows for both dirt and (up to 100 percent) artificial turf tracks and it reads like this:

5.1 Surface
The track surface can be dirt, or else partially or entirely covered with artificial turf. (Commonly referred to as Astro turf) Other materials can be used in sections of the track such as table tops and jumps to assure the durability of those sections for the entire event. Such other materials must be limited to less than 20% of the total track length.
Dirt sections should be of screened top soil / clay free from rocks and debris with only a minimum amount of sand and hard packed to provide a durable consistent racing surface for the duration of the event.

Click here to continue reading


December 15, 2014

RSD RR12 1/12th scale kit

RSD RR12 1/12th scale kit

Reflex Racing introduce the RDS RR 1/12th scale kit. Designed and developed in house at Reflex Racing the kit has several innovative features such as an integrated uni-mount shock/servo/antenna mount, and an adjustable wheelbase motor pod to make the car the most adjustable and versatile 12th scale in the market today. The car is also compatible with Xray or Team Associated side links, as well as Xray or Team Associated damper tubes.

Click here to continue reading


December 14, 2014

TLR 8ight-T 3.0 electric body & 22 series hardware

TLR 8ight-T 3.0 electric body & 22 series hardware

Team Losi Racing have new optional parts available for the 8ight-T 3.0 truck as well as the 22-4 4WD buggy. Starting with the 8ight-T 3.0, the new electric body offers the same style and performance as the 8IGHT-T 3.0 body, but all of the “nitro specific” holes for the engine head, fuel gun, and tank pull have not been cut out for the electric version. The body is made from durable 1.5mm polycarbonate, it is pre-cut around the front, sides, and back of the body as well as the body mounting holes and it includes die-cut vinyl window masks and a die-cut 8ight-T 3.0 sticker sheet.

Click here to continue reading


December 14, 2014

Arrowmax B-Max4 aluminium bellcrank set

Arrowmax B-Max4 aluminium  bellcrank set

The Arrowmax aluminium steering bellcrank set for the Yokomo B-Max4 buggy does away with the integrated servo saver of the original part to make for a rigid steering for improved cornering performance on high-bite surfaces. The set is machined from high-quality 7075-T6 aluminium, it comes blue anodised and it it recommend for european style carpet and astro turf track as well as high-bite dirt tracks.

Source: Arrowmax [arrowmax-rc.com]


December 14, 2014

VBC FireboltDM rear anti-roll bar set

VBC FireboltDM rear anti-roll bar set

New from VBC Racing and made for the FireboltDM 2WD buggy is a rear anti-roll bar set. It includes three different thickness and colour-coded anti-roll bar wires as well as all needed mounting hardware including ballcups, and ball joints. The set comes in handy when adjusting the buggy to high-grip surfaces as it reduces body roll on grippy tracks.

Click here to view another photo


December 13, 2014

Hiro Seiko Wildfire D07 lightweight screw kits

Hiro Seiko Wildfire D07 lightweight screw kits

Hiro Seiko have three new lightweight screw kits available for the VBC Wildfire D07 touring car. Coming as all-titanium or mixed aluminium and titanium sets the fasteners significantly reduce the weight of the car by about 17g (titanium) or 23g (mixed set). The mixed sets are available with red or gun metal alloy screws.

Source: Hiro Seiko [hiro-seiko.com]


December 13, 2014

Exotek Mini 8ight-T carbon & aluminium option parts

Exotek Mini 8ight-T carbon & aluminium option parts

Exotek introduce new carbon fibre and aluminium option parts for Losi’s Mini 8ight-T off-road truck. First up is the carbon bottom plate set that includes a 2.25mm thick main chassis plate and a heavy duty machined alloy nose plate. The main chassis offers a sleek factory carbon look and a lighter weight while the machined motor area allows the use of some larger diameter motors. In combination with Exotek’s 8ight-T servo mounts a larger 1/10th low-profile servo can be used for extra steering performance while the new optional shorty battery blocks help to fit 2S LiPo shorty battery packs. Included with the set comes mounting hardware and a decal sheet and the set can be used with the stock top plate or Exotek’s optional top deck.

Click here to continue reading


December 13, 2014

VBC Lightning10-235 1/10th 235mm pan car kit

VBC Lightning10-235 1/10th 235mm pan car kit

VBC Racing introduce the 235mm version of the Lightning10 1/10th scale pan car chassis. The Lightning10-235 marks the revival of the 1990’s Pro10 class and the kit is constructed using high grade carbon fibre materials, lightweight 7075 aluminium alloy, and high strength composite materials. The kit features ultra short 7075 aluminium drive hubs, a big bore centre shocks, multi location side springs, optional brass balance weight with multiple mounting locations, an optional fan mount, and a highly adjustable adjustable front suspension that allows to fine-tune track width, caster, active caster, camber and ride height. The oversized rear motor pod is designed to keep the wheel hubs as narrow as possible while allowing the use of brass balance weights for weight distribution fine-tuning. The kit will become available early January 2015.

Click here to view the features and more photos


Tonisport
Mibosport
LC Racing
VP Racing
T-Works