Red RC

September 12, 2014

Swiss IC On-road Championships final round – Report

Swiss Nitro On-road Championships final round - Report

The final round of the Swiss Nitro On-road Championships took place in Aigle, in the French speaking part of Switzerland. In the 1/8th class Simon Kurzbuch had a very swift 3rd qualifying round that handed him the overall TQ in front of championship favourite Mattia Pesenti. In the 1/10th class, Traugott Schaer dominated the whole qualifying and he was followed by Nuno Santos in 2nd and Michael Schaefer in 3rd.

Click here to continue reading the report

September 12, 2014

Teamsaxo GT-500W 235mm conversion kit

Made for the GT-500W pan car is this 235mm conversion kit from Teamsaxo. The set contains a new front suspension plate, long and short front links as well as longer turnbuckles and new rear wheel hubs. The parts make for a wider front and rear end to bring the 200mm World GT car to proper Pro10 dimensions. The kit will become available by the end of September.

Source: Teamsaxo [saxoracing.com]

September 12, 2014

O.S. Speed B2101 buggy nitro engine

Japanese company O.S. introduce their latest competition buggy engine in the form of the B2101. Based on the experience gained with the 21XZ series the square bore/stroke engine is of a new design that allows for a more controllable bottom to mid range power, resulting in improved vehicle control. The B2101 makes use of a new crankshaft that comes with a special coating and it is tungsten balanced while a redesigned cooling head lowers the centre of gravity. The motor will not replace O.S.’s Speed 21XZ-B Spec.II as this will still be available for all drivers who seek the ultimate in bottom end power. The B2101 is set for an October release following the World Championships in Sicily.

Source: O.S. Engine [os-engines.co.jp]

September 12, 2014

US Nitro World Cup – Announcement

The 2nd running of the US World Nitro Cup will be held December 4th to 7th at Full Throttle Raceway in Kissimmee, Florida. With last year being a great success, this year’s race has already received commitments from European drivers such as Dario Balestri, Robert Pietch, Kyle Branson and defending 1/8th Champion Alberto Picco, to be in attendance. This year’s qualifiers will be four minute runs instead of five, but the event is keeping its triple “A” main finals format. The race will take place close to all the major Florida attractions such as Disney, Epcot, MGM, Universal Studios etc. and it is open to three classes, Sedan, 1/8th Masters and 1/8th Open. Full details on the event can be downloaded here (PDF).

September 12, 2014

Daan Jacobs wins in Heemstede

The 6th and final round of the Dutch nitro on-road nationals was held at the MACH track in Heemstede. During practice it soon became clear that a lot of drivers were able to pull very fast laps, promising close racing in the qualification and the finals. On Sunday’s qualifying Daan Stuiver was the fastest driver of the National class with three consecutive laps in 48.724 seconds. Daan Jacobs followed behind with 48.777 while Julius Kolff scored a 48.823. Ricardo Hofmeijer completed the top 4 so far.

Click here to continue reading

September 12, 2014

Schelle Racing Nova slipper lockout plate

Stock racers who are looking to extract every little bit of performance out of their 17.5T buggies and trucks will welcome Schelle Racing’s Nova slipper lockout plate. Weighing in at 1.5g and shedding about 3.5g of slipper parts the plate locks the Nova slipper clutch for improved forward bite on very high bite surfaces. The laser-etched part comes including installation instructions and a Schelle mini decal.

Click here to view a photo of the part installed

September 12, 2014

Avid Triad Evo slipper plates

Avid introduce their new Triad Evo slipper clutch. It utilises a new plate design that is self-centring so there is no longer a need for the three hard-to-mount black washers. Avid also added three vented slots in order to remove some rotating mass and to help with cooling the plates during a vented operation. The original Triad slipper clutch kits will have a running name change to Triad Evo and will include the new Evo plates along with a new set of install instructions. The Evo plates are also available separately if racers would like to upgrade their current slipper, nothing else is needed. They are compatible on every vehicle except the Durango conversion. Due to the nature of the Durango design they are too tight for operation so now the Durango upgrade kit will include two original Triad plates without any price change. For customers that just recently purchased a Triad slipper and have yet to use it, Avid will honour a free exchange of the original plates for the new Evo plates.

Click here to view another photo

September 12, 2014

HemiStorm Addict Baja 5B bodyshell

HemiStorm have the new Addict bodyshell for the HPI Baja 5B large scale buggy available. Made from high-quality 1.5mm polycarbonate the 5-piece body is of a somewhat different shape compared to the kit body in order to give the 5B a fresh new look. First up are longer sidepods that keep away dust and debris from the crucial parts such as the clutch and pullstart. Additional width ensures sufficient cooling while underneath the skid plate there is a stepped line allowing for extra ground clearance in rough terrain. The body panels also give enough room for Outerwear’s prefilter while the raised front makes it easier to run upgraded linkage setups or additional electronics. Also included with the body comes a paintable lightweight roof that replaces the stock aluminium roof piece.

Click here to view more photos