Red RC

June 24, 2014

NVision Factory Pro 5800 square LiPo battery pack

NVision is the latest brand to introduce a square-type 2S LiPo battery pack. Build from high performance cells that are capable of 100C burst rates, the pack is ideal for all high-power applications. The special design mimics the dimensions of a side-by-side saddle pack battery but the single case does away with the need to use a jumper wire for charging and during use. The hardcase pack is equipped with a single 2mm connector tube for the balancer harness and dual 4mm tubes for the power wires and it is available now.

Source: nVision [nvisionweb.net]

June 24, 2014

Trinity introduce the D4 brushless motor

Following much speculation about the follow-up motor of the successful D3.5, Trinity now officially introduce the D4 electric brushless motor. Designed to meet all ROAR specifications the motor is based around a new stator design and a 3-piece heatsink can with an updated endbell for improved bearing alignment and increased airflow for lower operating temperatures. Other features include windings made from certified pure copper wire, grade 5 ball bearings, and new larger silver-plated solder tabs. The motor is 8 grams lighter than the previous D3.5 and available as 2.5T to 9.5T modified and 13.5T and 17.5T ROAR Spec stock motors. The motors should hit stores by the time you read this.

Source: Trinity [trinityrc.com]

June 24, 2014

Maxi Vogl successful at South German regionals

The 2nd round of the South German nitro on-road regionals was held at the MCC Hof track in the North of Bavaria. The 30 minute 1/8th class final saw Torsten Müller in the lead for about 10 minutes until he ran into trouble with some backmarkers which had him drop to 3rd. Maxi Vogl and Oliver Lembeck took advantage of this situation to end the race in 1st and 2nd position respectively. High front tyre wear prevented Torsten from challenging the top 2 drivers so he settled for 3rd in front of Christian Schmidkonz and Maverik Reisinger.

Click here to view the top 10 result

June 24, 2014

Tödtmann & Römer win at West Germany regionals

Tödtmann & Römer win at Western Germany regionals

Round three of the Western Germany nitro on-road regionals was held at the famous MRC Oberhausen track. 51 racers from 5 different countries made their entry for the event on a track that is known for its very high grip surface because it is mainly used by large-scale cars. With no direct qualifiers all of the top drivers had to run the 20 minute semifinals with Thilo Tödtmann being the fastest, taking the pole position for the finals.

Click here to continue reading

June 24, 2014

International Romanian Nitro Cup – Date change

As the summer nitro season is in full swing, the organisers of the International Romanian Nitro Cup wanted to notify everyone that the date has been changed for the annual event to fit within the many national events being run throughout Europe. The new date for the IRNC will be September 19th to 21th. The race will be held at the beautiful Hobby Arena track near Bucharest in 1/8th and 1/10th 200mm in-road classes with the chance to win some big money for those making the A final. More information can be found here.

June 24, 2014

Wicaksono wins at Jakarta regional buggy champs

The 3rd round of the Jakarta Regional Buggy Championship was held at the Graha Raya track in Serpong, West Java. A total of 33 drivers attended the event that saw Adrian Wicaksono taking TQ. At the end of the 45 minute final Adrian maintained the lead and came in 1st followed by John Agus and Jason Nugroho. Faisal Ali and Darmadi Kurniawan completed the top 5 result.

Click here to view the top 10 result

June 23, 2014

TrakPower 5800mAh square LiPo battery pack

Hobbico introduce the TrakPower 5800mAh square LiPo battery pack. Build from 90C cells the battery mimics the dimensions of a side-by-side saddle battery pack making it ideal for many 2WD and 4WD trucks and buggies. The pack features a black-colour protective hardcase and 5mm bullet-type connector tubes. Includes come also a pre-wired balancer lead and bullet connectors.

Source: TrakPower [trakpowerusa.com]

June 23, 2014

Bittydesign Striker-SR 3.0 190mm touring car bodyshell

Bittydesign have a first official image of the new Striker-SR 3.0 190mm touring car bodyshell available. The body was developed and tested over several month to create what Bittydesign announce as “a real fast bodyshell” with a high amount of steering efficiency and highest possible rear stability. The EFRA, IFMAR, ROAR and BRCA approved Striker-SR 3.0 comes with a large EFRA-spec rear wing to provide the best possible balance between the front and rear. Included with the body, that is made from clear 0.75mm polycarbonate, come window masks and a decal sheet with grille, head and tail lights.

Source: Bittydesign [bittydesign.net]