Red RC

July 17, 2013

DJ Apolaro wins 200mm at Copa Mitad Del Mundo

The Copa Mitad Del Mundo nitro on-road race for 200mm Sedans and 1/8th GT cars was run in the Quito area, Ecuador. The track is located roughly 3000 metres above sea level and the race saw entries from many South American countries including Brazil, Peru, Chile, USA and Ecuador of course. Friday’s practice was washed away by the rain largely but come Saturday the weather improved and the competitors were able to start working on their engines and chassis setups. The race format had direct qualifying for the top 4 so everyone was eager to qualify as good as possible. Capricorn’s DJ Apolaro was invited to compete in the Sedan class and soon learned that engine setup in the thin air was crucial. Nevertheless he ended up in third place after the qualifiers.

Click here to continue reading

July 17, 2013

TLR Grand Prix Series – Announcement

This Saturday, July 20th kicks off the TLR Grand Prix Series begins at CVRC. The TLR Grand Prix Series is a five race series that will determine CVRC’s top drivers and it is run in a large variety of classes including SCT2 and SCT4, Nitro Buggy and Buggy, Electric Buggy, several large scale and Kids/Novice classes. Racers are encouraged to attend every round of the series, but in the event they are unable to attend, there will be one throwout race. Trophies will be awarded to the top three in every class. Find more information here.

July 16, 2013

Cody King wins Pro Buggy at JBRL Nitro Rd4

The JBRL Nitro Round 4 was held last weekend in Temecula, California at ARC Raceway. Cody King and Reds Racing new Team driver Cody Smith went 1st and 3rd in the buggy class. During the final, Cody King filled up with fuel at 10 1/2 minutes. It was not an easy race, because he had to fight with Adam Drake for the win. With about 5 minutes left in the 20 minute main Adam had a couple mistakes and allowed Cody to stretch out a bit. This would give him about a 6 second lead and he could cruise home to the win. Cody was really pumped on the fuel economy, as he was consistently well over 10 minutes on a tank, and with fuel to spare. This was at race pace with a lot of wheel spin and a lot of throttle input.

Source: Reds Racing [redsracing.it]

July 16, 2013

New Serpent shirts and hoodies

Serpent announce new merchandise in the form of shirts and hoodies with redesigned front and back prints. The T-shirts are made from full-cotton material, come in European sizes ranging from S to 3XL and sport the new ‘Splash’ graphic while the hoodie makes use of the regular Serpent logo. The shirts come in orange or black colour with white versions to follow, the hoodie is available in black only.

Click here to view the other new shirts

July 16, 2013

Hudy Arena ready for Volker/Rheinard title showdown

The Yokomo Euro Touring Series makes its first visit to Slovakia this week (July 18-21) with the Hudy Racing Arena playing host to the season finale where two of electric touring car’s greatest rivals Ronald Volker and Marc Rheinard are set for a showdown that will decide which driver becomes the champion of the sixth season of the World famous championship. A new venue on the calendar, the Hudy Racing Arena is the perfect stage for what is set to be the most thrilling climax to an ETS season and in typical Hudy/Xray fashion the track has undergone meticulous preparations as it gets ready to welcome over the coming days the 240 plus drivers who will contest the 33rd race of the ETS.

Continue reading the announcement here

July 16, 2013

In Control?

Whichever class you focus on, it seems that one of the key talking points throughout the past two years has been tires. In the on-road nitro classes, that discussion has largely been focused on tire additive. For many years, the cars ran without additive being used on the foam rubber the 1/8th and 1/10th cars run on – but in recent years people began to realise the advantage the correct additive and application could provide. This dark art began to put people off racing in these classes, and races tried to find ways to prevent additive being used. But with additive difficult to detect and police, many realised the only way to police its use effectively was to allow it to be used.

Continue reading Oli’s column here

July 16, 2013

Yeah Racing cooling fan & steel servo screws

Yeah Racing announce the release of the Tornado high speed cooling fan in chrome-pink colour and special servo steel screws with aluminium bushings. Starting with the fan, the unit is 2S LiPo compatible, it is of a high-flow design and incorporates dual ball bearings for vibration-free operation. Sporting dimensions of 30x30x10mm it is ideal to cool speed controllers and motors and the fan comes pre-wired with a red JST connector. Also new are 3x10mm steel servo screws with pink colour aluminium bushings. The screws offer high strength ideal for all 1/10th and 1/8th applications while the aluminium bushings replace the conventional rubber grommets for rock solid installations.

Click here to view the other new parts

July 16, 2013

Xray T4 closed layshaft bulkhead

Xray introduce this new design middle layshaft holder for the T4 touring car. Different from the original ‘open’ part the ‘closed’ designed of the bulkhead captures the layshaft bearings to allow the removal of the upper topdeck screws in order to further adjust chassis flex and therefore the characteristic of the car. The bulkhead is useable on the left and right hand side and is made from 7075-T6 aluminium and comes orange anodised to match with the remainder of the chassis.

Source: Xray [teamxray.com]