Red RC

August 2, 2012

Core RC Pace 45 BL speed control

Core RC have introduced their new Pace 45 Brushless speed control. Exclusively designed to suit 1S LiPo running for single cell GT12 classes of racing but also perfectly capable of running with 2S batteries with motors 10.5T and higher. Suitable for sensored or sensorless operation with Zero Timing ‘blinky’ mode as standard but additional timing is programmable via the optional program card. The Pace 45 requires no additional booster for 1S use, just plug and play.

View more details here

August 2, 2012

KM H-K1 EvoII titanium options

KM Racing have release some optional turnbuckles for their H-K1 EvoII. Made from lightweight high grade titanium they are available in 21mm and 23mm versions. Also for the EvoII is this ball end rear stiffener which helps prevent the chassis from bending when braking and works to give the car more rear roll when cornering.

View the other new parts here

August 2, 2012

BRCA 1/12th National Series – Announcement

The BRCA have announced it’s calendar of events for the 2012/13 National championship for 1/12th scale electric cars. As usual, the championships will be contested over 6 indoor rounds on carpet, with each driver’s best 4 scores counting towards their final placing in the series. During the season we will visit many of the established venues, but also a couple of new ones. The racing format has been re-evaluated with the hope of attracting more younger and less experienced drivers to the series by offering classes for slower motors and simpler cars as well as retaining the classic open modified class for those who wish to race it. Drivers from overseas are invited to race with us, as are UK based competitors of all ages and experience levels.

View more details and dates here

August 1, 2012

Reds Racing USA sign Brian Thomas

Reds Racing USA have announced that Californian Brian Thomas has joined their team. Brian will be running the M7T engine for 2012 in 1/8 on-road and most recently finished 3rd at the KO Propo Grand Prix. He also qualified 2nd in both Sedan and 1/8th at the Airtronics Grand Prix where he went on to finish 2nd in Sedan and was leading 1/8th until car issues got the best of him. The Mugen driver brings years of experience to the Reds Factory Team and which will be a huge asset going forward.

Source: Reds Racing [reds-racing-usa.com]

August 1, 2012

Nosram Comet Evo & HD speedos

Like the new LRP Flow speedo but prefer red then try the Nosram Comet. Following two years of hard work and designed from scratch, the new Comet speedos are based on a completely new platform replacing the three popular Pearl Evo Version 2 speedos. Racers can use the Comet speedos for modified and stock racing, offering a multitude of setup options. Optimised cooling, extremely high power output over the entire RPM range and simple but flexible adjustability are only some of the highlights that make the new Nosram Comet speedos stand out. The unique software, a heavy copper 8-layer powerboard and the compact 2- piece machined aluminium housing have never been seen in a brushless competition speed control before. Its construction from thermo-conductive aluminium makes the case highly efficient for cooling.

View the complete feature list here

August 1, 2012

Mugen MBX-6 Eco USA race edition

Mugen USA have released this special race edition MBX-6 Eco. The 1/8th brushless buggy sports new silver graphite throughout and comes with a number of optional part as standard. Included are the aluminium front upper arm mount, rear arm mount, front & rear axle shaft and joint cups. Also wide offset wheel hubs in 1 and 2mm, S5 silicone o-rings and front and rear shock springs in 1.5/7/75T & 1.5/8.25T respectively.

View more images of the car here

August 1, 2012

Titan ARC R10 double-joint CVDs

Titan RC have released this latest option part for the ARC R10, a pair of double-joint CVDs. The shafts are made from hardened spring steel, which is super durable and provides a smoother transmission on the R10. The new design features 4 holes in the middle joint, which not only reduces weight but also make it easy to apply lubricant into the joint, while a reenforced spring ensures you never lose the connecting pin under any condition.

Source: Titan RC [team-titan.com.tw]

August 1, 2012

T-Work’s MBX-6 & X3 aluminium options

News from T-Work’s are these durable and lightweight hard coated wheel axle shafts and center shaft joint cups made from imported 7075 aircraft grade aluminum for the Mugen MBX-6/6T & Hong Nor/Jammin X3/X3E. Each axle and joint cups are over 50% lighter than the standard steel counterparts giving you considerable savings in overall weight while the axles will give you the added advantage of reduced unsprung suspension weight.

Source: T-Work’s [rc-tworks.com]