Red RC

July 12, 2013

Novak charging, motor and solder accessories

New from Novak come several useful things such as a charge adapter for XT60 connectors, bearing oil and solder flux. Starting with the adapter, the harness comes factory-assembled with 4mm bullet type male plus on the charger’s end, an XT60 plug on the batter end, JST/XH balancer adapter and 2mm bullet type male connector for the battery side balancer port. It is designed to work with Novak’s XT60 power plug system and LiPo chargers that have 4mm charge output jacks, and a 3-pin JST/XH balance socket.

Click here to continue reading

July 12, 2013

Renard & Pauwels win at Belgian SCT Cup Rd3

Renard & Pauwels wins at Belgian SCT Cup Rd3

In a great mix of zen attitude, firmness and professionalism, the crew of BPT Merchtem hosted the first Belgian SCT Cup race of the year to be run on astroturf. Track is located in a sport complex and features a challenging layout, with a quite bumpy surface, fast corners as well as big air jumps. The grip fluctuated a lot during the day, starting by being very low due to morning dew and being high once the generous sun dried it out before first qualification heat. The race also saw the attendance of many new faces who mixed things up. In 2WD qualification, Jean-François Renard (TLR 22SCT) and Nicolas Evens (TLR 22SCT) battled for pole position, both showing a significantly faster pace than the rest of the pack. In the end Nicolas got the TQ in front of Jean-François with Filip De Keersmaecker (Durango) taking third place on the grid.

Click here to continue reading

July 12, 2013

Adam Drake doubles at The Dirt Rio

The inaugural “The Dirt Rio” took place at the AMA-UFRJ facility in Rio de Janeiro, Brazil. The facility was founded in 2004 with its focus on airplanes. In 2012, the club built an off-road track with the help of Hobby21’s owner Leandro. The event hosted driver’s from seven different countries and The Dirt crew build a fun layout that made for great racing. The event kicked off with practice Friday night, followed by one round of controlled practice on Saturday morning. Qualification points were used to set-up the finals using driver’s three best runs out of the four rounds of qualifying. TLRacing/Novarossi/Pro-Line driver Adam Drake was the top qualifier in 1/8th nitro buggy and nitro truck. In the truck final Adam was able to take the victory with his 8ight-T 2.0 equipped. The buggy class also saw a clean sweep of Adam as he easily took the win in front of the competition.

Thanks to Adam Drake for sending the report.

July 11, 2013

VBC Racing Wildfire D06 announced

VBC Racing announced the forthcoming release of their Wildfire D06 electric touring car kit. It is understood that the car will be highly different form the current kit and that it will incorporate some of the latest touring car design ideas. All information on the kit will become available soon with the kit hitting stores in August.

Source: VBC Racing [vbcracing.com]

July 11, 2013

Ronnefalk holds overnight TQ in Reims

Swedish ace David Ronnefalk holds the overnight TQ at the 1:8 Offroad European Championships after he topped a second round of qualifying in Reims, France, taking his Orion powered Kyosho to the fastest time in Q3 by 4-seconds from Xray’s Renaud Savoya with Lee Martin taking his Mugen to third. Setting the 12th fastest time, the closing heat of the day saw defending Champion Darren Bloomfield post his best round with the British driver confident he can build on that in tomorrow’s final two qualifiers.

View our complete event coverage here.

July 11, 2013

Batlle fastest in Q2

Mugen’s Robert Batlle has TQ’d the second round of qualifying at the 1:8 Offroad European Championship, the World Champion topping the times by just 4/10ths over Q1 pace setter David Ronnefalk with 3-time former Champion Renaud Savoya completing the Top 3. Once again defending champion Darren Bloomfield struggled, the TLR driver only able for the 38th fastest time due to ‘struggling for grip’.

View our complete event coverage here.

July 11, 2013

Much More Multi Wheel Wrench

Much More Racing introduce the multi wheel wrench for 17mm and 23mm wheel nuts and also three and four pin nitro flywheels. The tool is completely made from high-quality aluminium and comes with a 17mm and 23mm wheel nut insert for 1/8th buggies and trucks, monster trucks and many large scale vehicle. The inserts are simply clicked into place and held by an O-ring making tool swap a breeze. Also incorporated into the handle is a dedicated flywheel holder, doing away with the need to hold the clutch with large pliers, a technique can destroy the wheel’s surface, while undoing the flywheel nut. The wrench comes black anodised and with laser-etched markings.

Click here to view more photos

July 11, 2013

Oskar Fjeld wins TC Modified at Norwegian nats Rd3

The third round of the Norwegian electric touring modified national series was held at the Vulbu Raceway close to Fagernes. The track itself is spectacular with a four meter elevation change and also the weather for the event was perfect, allowing good grip and interesting racing. The good forecast also meant a lot of drivers came out for the race, making it the biggest outcome in a long time. Qualifying consist of three rounds with the best one to count followed by triple finals. First round of qualifying saw Xray driver Tom Erik Haaversen setting the best time, closely followed by Oskar Fjeld and Joakim Nicolaisen in second and third. Oskar also set a new track record in this round.

Click here to continue reading