Red RC

June 27, 2013

Morganti double at Byron Fuels On Road Challenge

Nitro racers from all over the USA and from as far away as Shanghai, China descended on Leisure Hours RC Raceway in Joliet, IL for the 2013 Byron Fuels On Road Challenge. Qualifying would JJ Wang take the top spot in 1/10th 200mm, Joaquin DeSoto Jr the top spot in Nitro GT and Paolo Morganti the top spot in 1/8th scale. First on the schedule was the 1/10th scale class which following an early exit by Wang after 4 minutes, say Morganti go to the front of the field and take the win only 3 seconds in front of DJ Apolaro in 2nd, with Vincent Jackson in 3rd, 4 laps further back. The GT class turnout was very large this year and this resulted in some intense racing. Taking the TQ honors and finishing first in the 60 minute A main was Joaquin DeSoto Jr. Bill Sydor finished in second place followed by Andy Liu in third to complete an all Serpent podium. Although the first 20 minutes of racing during the 1/8th 60 minute A main was exciting and intense, lightning and rain forced the end of racing for the day. As a result, the top qualifiers were awarded the podium positions. Paolo Morganti, TQing took the first place followed by Mike Pulfer (Xray) and Jason Conley (Xray). Byron fuels took the win in all three classes.

View the other podiums here

June 27, 2013

Green & Pryke win at BRCA 1/10th Nats Rd5

Over the weekend of the 22nd and 23rd June, Round 5 of the BRCA 1/10th IC National series took place at the Cotswold club. The track had been nicely prepared for our arrival with a new pit lane fence being one of the noticeable improvements. The weather forecast for the weekend was not looking great, with gloomy weather conditions and rain predicted for the weekend. There were 26 entries in the 200mm class which is the greatest of the season so far, 17 entries competed in the Sports GT class. On the Saturday practice session, defending champion Mark Green, Alex Thurston and Joe Kerry were all looking quick in the 200mm class. In Sports GT it was again Glyn Beal who was setting the pace early on with his Serpent team mates Adam Crossland and Richard Boult also fast, David Gerard was also mixing it with them.

Continue reading the report here

June 27, 2013

Risser & Pauwels take Rd4 wins in Belgium

This past weekend the fourth round of the Belgian Electric offroad National championship was held in Merchtem near Brussels. In the 2wd class there was hard battle between Nico Risser (Kyosho RB6), Wesley Van Elmond (TLR22) and Bruno “Elvo” Heremans with the new Xfactory X6 Cubed. After missed victory in the first main due to a mistake in the last lap Nico Risser recovered to win the final two mains after an incredible battle with Wesley and Elvo. With the overall win sewn up Nicolas keeps his lead in the championship. In the 4WD class there was a great victory by David Pauwels (Xray XB4) after a good fight with team mate Fred Fontaine (Xray XB4) in front of Eric Michiels (Serpent) who finised 3rd.

View the 4wd podium here

June 26, 2013

BMT 984 1/8th scale chassis

BMT is returning to the 1/8th scale on road market after a break of many years, the former World Championship winning manufacturer has not been heard of much, with the exception of its entry into the Rally Game market, since the late 90s. The new BMT 894, the car in the photos is a prototype, is a pretty standard affair for a modern 1/8th scale car with some of the features including aluminium front & rear bulkheads, aluminium middle shaft bracket and a front anti roll-bar with classic blades or wire solution. The transmission uses a 0.8 module to improve acceleration and top speed, while on the radio plate it features a flex system and a radio tray module for both lay down servos and receiver including a RX box.

View more images of the 984 chassis here

June 26, 2013

2013 Bring The Heat race – Announcement

Bring The Heat Race - Announcement

The good guys at Flowood RC Indoor Park dropped us a mail to tell us about their biggest and most important race of the year for FRC, the third Annual Bring The Heat race, which will run from July 19-21. Recently crowned National Champion Adam Drake will be returning for his third year to defend his crown at FRC and Ronda Drake will also be there and they have some surprise racers attending this year that have not been to FRC before. FRC are taking the first 350 paid entries so if you have not signed up or paid go to www.rcsignup.com and do so now. The organisers will be giving away over $25,000 worth of donated product to the racers this year from their sponsors. You can find more information here.

June 26, 2013

Serpent expanding development team

The Serpent development team is expanding with the arrival of Nacho Lopez from Spain. Nacho is an industrial engineer and has done freelance work for Serpent in the past years already. He is involved in design, modeling, engineering, testing and racing, as well as working on manuals, video and other promotional affairs. He will attend many national and international races and remains based in Valencia, Spain where his local onroad rack is Almussafes, just 15 minutes away. Nacho is a top level racer in the 1/8 onroad class in Spain and is 2013 EC-B 1/8 Vice-champion. He was already involved in the testing of the Viper 977 in December last year and is now working now on the F110 Formula one Serpent car, as well as on the 747-e, 977-e and F180-e, which we will see more off in the months to come. As the Serpent offroad line is expanding fast, they are also looking for additional development staff specialized in the offroad market. An engineering education and/or background as well as vast RC racing experience is needed with some preference for being USA based and willing to move the Florida, to coop with Billy Easton, head of offroad design. If you are interested write to info@serpent.com

June 26, 2013

MR..Roche blades, ceramic bearings & car bags

Roche, under their MR..Roche brand have released this new line of products starting with shaft blades for the Yokomo BD5/BD7 (Blue), Tamiya TRF415V5 (Pink) and Xray T3/T4 and VBC WildFire (Orange). These are made from a special self lubricating material, the low friction blade provide a smoother and higher performance on the drive-train. Next up is its line of MR (Marc Rheinard) ceramic ball bearings featuring a high quality pink and blue rubber seal. Available in 4pcs of 10x15x4mm or 4pcs of 5x10x4mm, the friction is reduced to near zero, so your car’s acceleration and top speed will be even better. For transporting your touring car chassis there is a new MR..Roche carry bag. The black case features the MR..Roche logo and colorful trim and comes with a handle and shoulder strap. Size 43cm(L) x 20cm(W) x 15cm(H).

View the other new products here

June 26, 2013

JConcepts SC10, T4 & B4 anti-roll-bar kit

The JConcepts anti-roll-bar kit for Team Associated SC10, T4 or B4 vehicles is the result of continuous driving on indoor, technical driving circuits which require the correct vehicle balance. JConcepts, together with test drivers Brian Kinwald and Paul Wynn, sought out the proper pivot placement on the front and rear a-arms which provided the best performance point, which became the basis for the new design. The inner mounted locations place more emphasis on wire diameter and less mechanical advantage which allows the driver a more finely tuned piece.

View more details here