Red RC

May 31, 2013

John Bruins wins Dutch Stock Nats Rd2

Last weekend saw the second round of the Dutch electric track nationals take place at the 2012 electric TC worlds track, The MACH in Heemstede. The worlds chicane proved to be a challenge to many drivers however it was round one winner, Team Kyosho driver John Bruins who would take the TQ honours in the stock class followed by track local Jitse Miedema and reigning Dutch national champion Rob Janssen. With the weather forecast seeming to be a bit dismal and chance of rain high, many drivers came prepared with rain cars however it thankfully remained dry all weekend which resulted in John taking the clean sweep, winning all three finals. Behind him an exciting battle took place with the following three drivers ending up on the same points total. Final times would be tie-breaker in the end which saw Jitse Miedema driving a Spec-R R1 take second place, followed by Rob Janssen and his Tamiya taking third. Serpent driver Ronald Arts came in an unlucky fourth place, just missing out on a podium place.

Thanks to John Bruins for the report.

May 31, 2013

Team Associated Top Gun Shootout – Announcement

Team Associated Top Gun Shootout - Announcement

Team Associated have announced the 2nd Annual Team Associated Top Gun Shootout hosted by SD/RC Raceway in San Diego, California. The two-day event takes place July 6-7th 2013 with qualifying on Saturday and triple A-main events on Sunday. With a large 128′ x 74′ footprint, SD/RC is one of the largest indoor tracks in the nation and is suitable for both 1:10 and 1:8 racing. Scheduled to attend for Team Associated is 4x World Champion Ryan Cavalieri, 2012 Off-Road Shootout Champion Steven Hartson, Team Manager Brent Thielke, Jason Ruona of JConcepts, and many others from across the West coast. For more information and event details, contact Scott Bergen at info@sdrcraceway.com, or visit SDRC Raceway on Facebook.

May 30, 2013

Avid RC TLR22 Triad aluminium topshaft

Avid RC’s new Triad aluminium topshaft is an upgrade for the TLR 22, 22T and 22 SCT to eliminate the special ‘mini’ kit slipper nut and use a standard 5.5 mm hex driver to set the slipper clutch. Born partly for necessity, partly for convenience, racers will appreciate this upgrade as they can go back to using a standard slipper nut. Many Triad customers had issues with TLR topshafts which fluctuated in length and did not allow for proper spring tension on the slipper clutch, this shaft aims to solve that.

Source: Avid RC [avidrc.com]

May 30, 2013

JConcepts 1/8th Spring Nationals report

JConcepts headed to Nebraska for the 4th annual JConcepts 1/8th Spring Nationals at the HobbyPlex in Omaha. The fabulous indoor track was once again filled with the Alex Sturgeon creation to challenge all drivers. The flowing fun layout was definitely busy to keep everyone on their toes, and going consistently fast with no mistakes would be a challenge. The format was Friday practice. With heavy rain on Thursday night and Friday morning, being inside was awesome. More rain on Saturday followed by 3 rounds of qualifying, racing never missed a beat thanks to the HobbyPlex racing circuit. Sunday would be main day to cap off the event.

Continue reading the report here

May 30, 2013

P-S-R Revolution bearing oils

P-S-R have introduced a new bottle design for their popular line of Revolution bearing oils. The handy new bottle allows you to better place and control the amount of oil used. The 3 types of oil include Low Friction Oil, to decrease the friction within the drive train to nearly zero, High Pressure Oil for Centax clutches and High Temperature Oil for high temperature heavily used bearings.

Source: P-S-R [power-save-racing.de]

May 30, 2013

Capricorn big bore shocks & springs

Capricorn have released this new 11mm big bore shock absorber set. Featuring a new treatment on the steel shock rod, there is a range of pistons available with 1 to 6 holes (1.2mm each). Designed for the Lab C02, they also fit the Xray NT1 2013 version with a length from uniball to uniball of 50mm. For the new shocks, Capricorn also have a new line of big bore springs. Made with wire from 1.5mm to 1.8mm diameter and from 5 to 6.5 turns, there are a total of 8 different springs available.

View the big bore springs here

May 30, 2013

JConcepts RB6 Monroe battery brace & FR shock tower

New for the RB6, the Monroe battery brace by JConcepts is highly functional and aesthetic eye-candy, designed from genuine 2.5mm carbon fiber. With so much variety in today’s batteries and with most vehicles having a flexible mounting position forward and aft, functionality is always a top priority. With the Monroe battery brace, running different battery positions is possible while maintaining the necessary terminal clearance and providing a healthy holding force to keep everything intact even in the most demanding conditions or the inevitable crash. Also new for the RB6 is this 4mm carbon fibre front shock tower. A lightweight, durable and high-grade option for the popular vehicle, JConcepts has located and plotted the exact geometry locations while trimming the outer border of the tower in a low-profile and slim configuration. Additional reinforcement ribs have been added where needed for extra strength. The front tower includes front 4 – 3x10mm mounting screws for a secure hassle free attachment.

View the front shock tower here

May 30, 2013

Much More Impact FD LiPo batteries

Much More have introduced a completely new line of Impact LiPo batteries called FD or Flat Discharge. The new configuration gives a flatter discharge curve meaning you get more voltage for longer instead of a steady drop in voltage as in regular packs. Available in 7200mAh 80C & 6000mAh 80C stick packs, 6000mAh 80C & 5000mAh 50 (low height) saddle packs, 4600mAh 80C shorty pack, 6400mAh 70C 1S & 3000mAh 60C 2S 1/12th packs and a 4200mAh 50C (low height) stick pack.

View the discharge curve here