Having had the first photos and product details last week, Reedy today have officially released the full information on the new Sonic 540 Mach 2 brushless motors. The motor will be available in 4 different spec versions, 10.5, 13.5, 17.5 & 21.5 as well as a complete range of modified versions when it is released later this month. For full info on the product you can view our original story here.
Source: Reedy [teamassociated.com]
Vampire Racing have announced the release of three new LiPo battery packs in the form of a 4200mAh 30C, 5300mAh 30C and 7200mAh 70C pack. The 4200mAh 30C 7.4V pack is an entry level pack ideal to upgrade RTR cars, buggies and trucks with a high-performance LiPo battery. Housed in a 23.5mm hardcase with lower locating lugs the pack also fits many older kits with battery location chassis cut-outs. The lightweight battery is also ideal for 2WD buggies racing on slippery dirt and clay tracks.
LRP have released their new Dynamic 10 brushless motor line offering high-end motors in 540 and 550 size. The ultra lightweight, precision machined 7075-T6 aluminium housing has optimised cut-outs for best heat absorption and lowest running temperatures also at full power output. A special design with 4 magnets and 12 slots provides plenty of torque while the precision balanced rotor guarantees maximum radial run-out and rpm. The Dynamic 10 is available in 3800kv, 4800kv & 5800kv while the Dynamic 10L comes in 2400kv, 3700kv & 4700kv versions.
View the Dynamic 10L motor here
Seen in a teaser image a while back Protoform have now released full details on the all-new PFL128 race body. This body takes styling cues from a “new for 2013” LMP2 racer slated to run in the WEC Championship along with 24h of Le Mans. Air management and body rigidity were the prime considerations when re-designing the front fenders and lengthening the side recesses. The PFL128 meets all EFRA (#31531), IFMAR and ROAR body rule requirements and includes headlamp decals, as per ROAR rules. It is available in three weights of genuine lexan: . 040” (regular weight), .030” (light weight) and .025 Lexan® (PRO-lite weight for expert racers only). Included with the PFL128 is protective outer film, body side-stiffeners (w/hardware) and decal sheet.
View more images of the body here
After the success of the top of the range Bullitt B-218, the company is delighted to announce its successor the Bullitt B-219. Throughout 2012, they have been extensively testing to provide the best possible replacement for the market leading B-218, and the result is an improvement in all areas. Concentrating on drivability and fuel efficiency, and having found notable gains in these areas, they also improved the top end power of the engine. Of course the established quality of Bullitt engines hasn’t been compromised in any way, and the features unique to the top of the range engine, such as the ceramic rear bearing and the DLC coated/tungsten balanced crankshaft are retained for maximum performance and longevity.
Source: Bullitt [nemoracing.com]
Raduga RC Raceway and Rotor Club have been in touch to announce the first international RC Off-road Event in Russia, called ‘Russian Extreme Race’, which will take place in the heart of the European part of Russia from June 21-23, 2013. The race will be run on a nicely located dirt track and is open to both 1/8th gas and Electric and will be run according to EFRA rules. More details can be found here.
New from Tekno RC for the EB48 are these Xtra Tough suspension arms. These new arms are a direct fit on the Tekno RC EB48 buggy and use a new blend of materials they are nearly indestructible which make them great for cold weather racing and colder climates. The all new design also features a modified outer shock mounting location and by using the outer shock mount location will no longer sacrifice down travel so you can tune your car more precisely.
View the rear suspension arms here
The new Finnisher wing from JConcepts features a high-attack, V-angle design with adjustable gurney and winglet options. A radical, edgy design which functions and compliments the Finnisher and Silencer body design, the new wing includes elements and features never seen before in 1/8th Off-Road. An option gurney or winglet is easily added to the wing with one simple 3x8mm screw. The wing can be run stock with a small winglet which provides some edge stability and light deflection. The included optional 2-piece gurney slides in through the bottom on both sides adding that small vertical wall at the rear providing that last bit of tuning ability on dusty and low grip conditions. The wing to vehicle attachment is made easy with included, screw-in type and body-clip type wing button choices adding security and additional detail. Top off the appearance of the Finnisher by applying the pre-cut decal wrap on each panel surface for the ultimate look and performance.
