Red RC

November 28, 2012

Reedy 350mAh 7.4V LiPo RX battery

Reedy’s 350mAh 7.4V LiPo RX battery is perfect for use in 1S powered 1:12 and 1:10 pan cars that require a receiver battery, or in applications where the use of a receiver battery is advantageous. The battery features an integrated switch so that the car can be powered on and off conveniently. Thanks to a separate non-switched charging jack, the battery can remain plugged into the receiver during the charging process. A 350mAh capacity is good for a typical day’s worth of pan car racing. Start the day charged and run two qualifiers and a main event without having to worry about re-charging. Weighs in at 13 grams.

Source: Reedy [teamassociated.com]

November 28, 2012

Adrian Berntsen win Rd2 of Norway Indoor Nats

The 2nd round of the Norwegian national indoor series was held in Gjovik last weekend. All of the best modified drivers in Norway were attending the race which increased the level of the race and made it even tougher to make the A-main, and also making it harder to make the podium. After qualifying it was Adrian Berntsen who took the TQ spot being the only driver to make a 30 lap run. In second was Tom Erik Haaversen, while Petter Berntsen took the 3rd spot. The gap between Tom Erik and Petter was 0.142 seconds. In the first two finals it was Adrian who could take two easy wins and claimed the 1st place overall. Talented Oskar A. Fjeld drove two impressive finals battling both with Petter and Tom Erik to take the 2nd place in both of the two first finals. Petter Berntsen took 3rd in the first final, while the newly crowned 1:10 2wd buggy Norwegian Champion Niklas Bjørkå-Roos took 3rd place in the 2nd final. In the last final Adrian was having a safe lead, but after rolling on the curb in the last minute, Petter was able to overtake the lead and in the end finished right ahead of Adrian, taking an important win in the last final to take the 2nd place overall from Oskar.

Source: Xray [teamxray.com]

November 28, 2012

Elangears Cronus 400S power supply

Elangears have updated their Cronus power supply line up to include the 400S. This 400W unit features an output current of 30A and a fresh new look. The 400S also features an updated USB port outputting 5V at 1.5A, suitable for charging your iPad.

Source: Elangears [elangears.com]

November 28, 2012

Speedpassion F-68 1/10th scale F1 body

Speedpassion have released their new F-68 1/10th scale Formula 1 body. The new F-68 body takes customization and tuning to a new level in the rapidly growing 1/10 scale F1 racing segment. Racers can mix and match the included 4 interchangeable nose profiles and 2 interchangeable rear fins to create their own personalized F1 car. Along with the different front nose profiles and rear fins, the body includes a driver’s helmet, double-sided tape, a decal set and assembly instructions. The F-68 body fits all popular 1/10th scale racing chassis on the market.

View more body images here

November 28, 2012

Exotek RB6 alloy shock post set

More new products for the RB6 with Exotek releasing this alloy shock post set for the Kyosho car. The secure threaded posts offer quick adjustments and are precision machined for perfect fit onto the shock caps. Includes rubber rings to keep the shocks in place and to protect the factory red finish. Fits a 7mm wrench, same as the wheel nuts.

Source: Exotek [exotekracing.com]

November 28, 2012

Avid Kyosho top shaft or Triad slipper clutch

Kyosho RB5 and RB6 owners can now run the Avid Triad next-generation slipper clutch thanks to this new Kyosho top shaft. A direct replacement for the Kyosho main gear shaft for offset motor, the new shaft allows racers to run the Triad slipper clutch along with optional Triad spur gears 69, 72, 75, 76, 78, 81, 84, and 87. Perfect for stock racers limited by Kyosho spur gear selection. Precision CNC Machined in the USA, it is made from 7075 hard-anodized aluminium.

Source: Avid [avidrc.com]

November 28, 2012

Viper 1/8 VTX8 ESC

More than a big brother to the VTX10 series, the VTX8 from Viper was designed from the ground up to handle all the large scale, high voltage and massive power demanded for 1/8 scale and 4wd Short Course racing. Able to handle batteries from 2s to 6s, 2 pole and 4 pole motors from 540 up to 1/8 size motors. A durable full aluminium waterproof construction helps to make the VTX8 strong enough to handle the rigors of large scale vehicles. Including a built in fan with carbon fiber bracing to ensure the VTX8 is ready to get you to the finish line.

View more details here

November 28, 2012

Reedy 1515-SL sensorless BL motor

Reedy’s 1515-SL sensorless brushless motor is the perfect choice for the enthusiast looking to upgrade his RTR motor with one that increases power and improves reliability. Due to its sensorless design, the 1515-SL operates powerfully and efficiently without complicated sensor harnesses and features a 5mm output shaft, making it perfect for use in 1:8 scale buggies and trucks.

View more details here