Red RC

November 2, 2012

Xray Column – Making the T4, Part 1

The 64th installment in the Xray column from Xray owner and chief designer Juraj Hudy is now online. In this months column, Juraj gives us an insight into the design, prototyping and manufacture of their all new T4 touring car.

I had been feeling for some time that we would need to attempt a different approach in order to reduce traction rolling in extreme traction conditions, yet still be able to increase steering and improve corner speed. Before doing anything with the long proven suspension I first wanted to experiment with weight distribution, chassis flex and primarily CG. My theory was that lowering the CG would reduce roll, thereby increasing traction and corner speed. Now I needed to test that theory.

Read the full column here.

Source: Xray [teamxray.com]

November 2, 2012

Exotek Durango gear cover & hex adapters

Exotek have released this heavy duty CNC machined gear cover for the DEX210, DEST210 and DESC210. The cover allows larger pinion area for stock class racing, allowing up to 37 tooth 48 pitch pinions. Aids in cooling the motor by adding more surface area to the motor mount while a slotted bottom screw mounting allows for easier removal from mid motor configuration. Exotek have also produced a pair of precision 15mm alloy hex adapters for the DESC210 or DESC410. A special design uses a set screw to lock the pesky axle pins in place for worry free wheel changes.

View more images here

November 2, 2012

JConcepts body mount braces

Short Course trucks are very body sensitive. The proper body style, cut-outs, overall weight and roll characteristics can determine a properly handling vehicle. The TLR 22 SCT has a very flexible front and rear body mounts which provides several durability advantages but when it comes to performance, having a sturdy base to the body is critical. JConcepts body mount braces perform just as the name suggests and supports the body mount in high-force situations. While in the turns, the weight of the body hangs down in the rear and allows the body to flex toward the tires which causes unwanted handling and aero changes which may contribute to an ill handling vehicle. Simply install the brace as instructed and the body will now remain in a more standardized position on high-bite conditions and during hard corning.

Source: JConcepts [jconcepts.net]

November 2, 2012

TOP R-F01 narrow front arm mount

TOP Racing have released this narrow front arm mount for the Rebel R-F01 Formula One car. This option is for the drivers who would like to run their Rebel R-F01 narrower as a setup option or in races under a narrow tread width regulation.

Source: T.O.P. [top-racing.jp]

November 1, 2012

JConcepts Kyosho RB6 Finnisher body

JConcepts have released a Finnisher body for the new Kyosho RB6. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The chassis to body fit has been tightened up which eliminates empty voids that contribute to mid-flight directional changes. The rear of the cab has a new step feature which allows the placement of a secondary side window and also a louver which can be trimmed to allow air to escape at the top of the body. In addition to the newly designed body, JConcepts has included 2 of the latest 6.5″ wide Hi-Clearance rear wings.

View another image of the body her

November 1, 2012

Answer RC 1/10th ultra wheel nuts

Developed by Answer RC to be the single best wheel nuts on the market for 1/10th Buggies and TC, these nuts have a serrated face meaning that the nut bites into the wheel to form a solid lock between both. A 3mm thread and 7mm outer diameter, they are CNC Machined from hi-spec aluminium for lightness and feature nylon inserts for added security. Available in red, blue, black, gold & purple.

Source: Answer-RC [answer-rc.com]

November 1, 2012

Serpent super soft fuel bottle

Serpent have released their new super soft fuel bottle, for super-fast refills. Measuring in at 500ml, it features orange anodized, engraved tubing and cap, with an additional spare cap in the neck of the bottle.

Source: Serpent [serpent.com]

November 1, 2012

Duratrax 17mm wheel nut driver

The Duratrax 17mm wheel nut driver is a valuable tool for every 1/8 racer’s toolbox. The hardened 17mm socket fits most 1/8 scale wheel nuts and its large ergonomic soft grip handle is easier to use than T-handle style wrenches. Available in early November.

Source: Duratrax [duratrax.com]