Red RC

September 17, 2010

Team Grid RC RC8 motor mount

Team Grid RC have released this new motor mount for the RC8Be, RC8Te and SC8e designed with racers in mind. One of the visual things you will notice is an integrated pinion support for the motor shaft. By placing the pinion support at the end of the pinion gear, the motor can now withstand the punishing loads it is subject to during intensive racing conditions. By machining the pinion support into a single unit, the mount is precise and very durable. For added performance, the Grid motor mount has incorporated multiple mounting holes to utilize more than two mounting screws. If you currently run Tekin motors, the Grid motor mount will use 5 of the available 6 holes. If you use the Neu/Castle motors, the Grid motor mount will use 3 of the 4 available holes. By adding more mounting screws, it is strengthening the setup and reducing the chance of any motor coming loose during hard racing conditions. Instead of using a sliding mesh setup, Team Grid has opted for a cam style mount, which provides a more precise mesh adjustment, and once set, the mesh will hold until you need to change it. Team Grid will also be releasing motor mounts for Losi, Mugen, Xray and others.

View more images of the mount here

September 16, 2010

Xceed Masterfix .12 pipe set

New from Xceed is this Masterfix .12 pipe set, a very short machined inline pipe made of full aluminium bar. A super strong EFRA legal pipe (2663) with great performance, it helps improve torque and mid-range, while retaining good top-end and improving fuel-efficiency. It can be used with the header pipe included in the set or if you want more top-end it can be partnered up with a .21 inline header. This set comes complete with header, springs and silicone rubber seals and has been tested and successfully raced with Novarossi, Max, Sirio, Mega and Picco engines.

Source: Xceed [xceedrc.com]

September 16, 2010

Adam Drake victorious at Southern Nationals

Team Losi/Novarossi driver Adam Drake attended the Inaugural Southern Nationals and RC Expo in West Monroe, Louisiana held inside the Ike Hamilton Expo Center. The track was one of the largest indoor facilities in the world with great ventilation and air conditioning and is equipped with 150 full service RV hookups, pit stalls with lockable gates and the hotel was directly across the street and within walking distance. The Southern Nationals had an area for manufacturers to display product and answer question for consumers and spectators and attracted 260+ entries and sold nearly 700 tickets for spectators.

Continue reading the report here

September 16, 2010

Video – Losi 1/16 Mini SCT

[youtube]http://www.youtube.com/watch?v=YBifVdUlZ2w&hd=1[/youtube]

Embedded above is a video from Horizon Hobby in which Gary Katzer sits down with the 1/16 Mini ReadyLift SCT‘s lead designer Keith Whisler, who provides some cool info regarding the development and design that went onto the Mini SCT.

September 16, 2010

VP Pro turnbuckle wrenches

VP Pro have released this new set of turnbuckle wrenches. Made from high quality steel, they are available in 3mm, 4mm and 5mm versions and their slim compact design makes for easy adjustment of all turnbuckles, even in hard to reach tight spaces.

Source: VP Pro [vp-racing.com]

September 16, 2010

2010 Rose City Scale Racing Grand Prix

On a beautiful Labor Day weekend in Portland, Oregon, Rose City Scale Racing hosted the 2010 RCSR Grand Prix. Drivers were faced with a technical layout, with multiple fast kinks, off-camber turns and elevation changes, thanks to the nature of the landscape. Traction was high, but due to the changing temperature, drivers were faced with decisions on tire management and setup. The format for the weekend was 3 qualifiers on Saturday, LCQ and Mains on Sunday.

Continue reading the report here

September 16, 2010

X-Factory slipper shaft brass flywheel

X-Factory have announced the release of this brass flywheel for the slipper shaft of most 1/10 off-road cars, especially mid-motor cars. With the development of brushless motors, then the introduction of sintered rotors, and now high-discharge LiPo batteries, the torque effects can actually be too much in some spots on some tracks, usually in the infield. Sometimes the car can pitch too violently under power and particularly on brakes with weight transfer between throttle and brakes at times can exceed the rear tires’ grip. The flywheel bolts right on the slipper shaft, therefore rotates opposite to the motor and wheels, smoothing everything out. On high traction surfaces where the tires have excellent grip, the part is not needed so much, and sometimes a lighter flywheel will provide just the right effect. Which is why they have center-punched a dozen holes in the periphery of the weight and supplied the proper drill bit so you can lighten the part to fit your track. Drilling three holes takes out about 1/2 gram from the 15-gram part.

View the flywheel mounted here

September 16, 2010

Kyosho MP9 TKI 2 Spec A

Kyosho have introduced a race roller edition of their new MP9 TKI 2 referred to as Spec A. Spec A (ARR), also referred to as a Race Roller, is a semi assembled kit. All Spec A kits are factory assembled by dedicated staff with years of RC experience and thoroughly checked by the designer Yuichi Kanai himself to deliver the best buggy out there. Even the small details such as ride height and alignment are strictly measured and set one by one. All this time and care allow you to receive a race ready chassis.

Source: Kyosho [kyoshoamerica.com]