Red RC

December 18, 2009

Team Associated RC10T4.1 RTR truck

Based on the 7-time National Champion RC10T4, the brushless RC10T4.1 from Associated is a fully assembled truck that features many of the components from the RC10T4 Team kit, while incorporating a totally new 2.4 GHz XP3-SS 3-Channel radio system and SHV1504 MG metal gear steering servo. Power is supplied by a Reedy 3300kV brushless motor while the XP SC450-BL electronic speed control with LiPo cutoff provides smooth throttle control. A sealed gear differential improves reliability and allows fine tuning for different track conditions. Also available in a brushed version, which is supplied with a 17-turn Reedy motor and XP SC200 electronic speed control.

Click here for the feature list and more photos

December 18, 2009

Raimondo Gilletti joins Savox Team

Savox have signed a deal with Team Magic factory driver Raimondo Gilletti to run with their Servos next season. Very pleased with the deal given to him by Savoxtech in Taiwan, Raimondo is happy to use Savox’s high quality products in his car and is looking forward to help promote the brand in Europe. Raimondo will use Savox SC-1251 low profile servos in his Novarossi powered Team Magic.

Source: Savox [savoxtech.com.tw]

December 18, 2009

Core RC aluminium servo horns

Core RC have introduced their new range of high strength aluminium servo horns. Extremely rigid and very light they also sport an additional clamping screw for extra safety under extreme loads. Featuring four mounting holes for linkages, they are available in three colours, purple, blue and black and come suitable for Futaba, KO and Sanwa servos.

Source: CS Electronic [cs-shop.de]

December 18, 2009

X-Factory X-6 Rear CVD axle

X-Factory have announced a new rear axle for the X-6 and X-6 Squared buggy, designed specially for car and manufactured by M.I.P.. Chief Engineer Paul Sinclair explained that Many drivers have used their older rear axle which was a direct copy of the BK2 axle and it needed shims on the inside to make it work. While many drivers use it because it allows full droop, the old axle as really too long and sometimes caused the dogbones to bottom out in the outdrives. This new axle is the perfect length allowing full droop but will not bottom out in the outdrive and includes the correct spacer to go between the axle and the inner bearing. The axle fits right on your C.V.D. in place of the standard B4 axle and the spacer goes on the axle against the shoulder to the inside of the inner wheel bearing.

Source: X-Factory [xfactoryrc.com]

December 18, 2009

Robitronic Large & small tool bags

Robitronic have released two new tool bags in different sizes, one which can accept over 20 tools and a second that can hold up to 10 tools. The larger bag (above) measures in at 29x24x4cm and can accept all the tools you need to bring with you to the track, with various elasticated loops that can hold a host of different specialized tools. The second smaller bag is only 29x26x4cm and allows you to hold only the most important 10 tools you need with you. Both bags sport the Robitronic logo and colours and are long wearing, protecting your tools during transport.

Click here for more images of the tool bags

December 18, 2009

Core RC aluminium servo horns

Source: CS Electronic [cs-shop.de]

December 18, 2009

Dynamite Platinum Pro temp gun

Dynamite have introduced their new platinum pro temp gun w/laser sight. Featuring a temperature range of -76F to 932F (-60 to 500C), this easy to hold temp gun has an accuracy of +/- 2% of reading with 1/10 degree resolution. The bright built-in laser allows for easy aiming while the amber backlit LCD display shows the temperature clearly.

Source: Dynamite [dynamiterc.com]

December 18, 2009

John Ermen joins RB for 2010

RB Products in France have announced that they have signed multiple Dutch National Champion John Ermen to their team. The former Novarossi driver, and European ‘B’ Championship runner up, will use the company’s Circuit 9 engine and associated accessories in his Serpent 966 chassis for the 2010 season and had the following to say:

I’ve been cooperating, promoting, testing & developing with a lot of professional companies over the years in the 1/8th scale onroad market and I’m really looking forward to working with the RB team in 2010. See you on the track side!

Source: RB Products [rbproducts.com]