Robitronic have released this 1S 3,7V 1200mAh LiPo glow starter with charger. Identical to that released by Dynamite last week, this lightweight design has enough power for more than one race weekend, with the integrated LED showing the condition of the plug. Supplied with the wall charger, it easily plugs into the 2.5mm charging jack on the rear of the handle for convenient charging.
Source: Robitronic [robitronic.com]
Providing advanced AC/DC battery management, Team Orion’s Advantage IQ605 charger rocks the house with the ability to charge 1 to 15-cell NiMh/NiCd, 1-to 6-cell LiPo/LiFe/Li-Ion and 2-20V Pb batteries. It can also charge up to 5 amps, discharge at 1 amp and is equipped with an integrated balancer for LiPo and LiFe batteries. The unit comes in a robust gun-metal aluminum case and is compact enough to take anywhere.
Source: Horizon Hobby [horizonhobby.com]
Dynamite’s new LiPo Voltage Regulator oversees the output voltage of 2S receiver packs to safe levels. That makes it a must-have accessory for 1/8-scale nitro enthusiasts and hobbyists who use LiPo receiver packs. The regulator contains a low-voltage cutoff, allowing users to protect their receiver packs from damage due to over-discharge.
Source: Dynamite [dynamiterc.com]
Xray have introduced the all-new T3R, the latest release from their design studios. The T3R represents the latest evolution of the successful Raycer concept, luxury at an affordable price. Based on their top end T3 platform, it utilizes a LiPo & NiMh multi purpose-designed platform, with the unique ray alternative drive-line configuration for perfect weight balance with either type of battery and electronics layout.
View the full feature list here
Proper maintenance is essential not only for the life time of every single part and the car as a whole, but also for the general performance. Nitro cars especially need intensive care and attention so with that in mind SMI Motorsport offers a new Orcan maintenance set for nitro cars that includes five products to keep the car’s parts running well and looking good. First of all, an engine maintenance oil which lubricates the bearings and avoids rust and oxidation. Second, a special oil for a perfect air filter. Third, a silicone spray to make the belts run smooth and the plastic parts look great. Fourth, isopropyl alcohol to clean the car and engines. And fifth, a well-known putty for easy dirt removal. All these products come in a handy Orcan multifunction bag.
Source: SMI Motorsport [smi-motorsport.de]
[youtube]http://www.youtube.com/watch?v=KMxeOOOHmHs[/youtube]
Chad Bradley TQ’s and wins the Tuesday Night Nationals at Hot Rod Hobbies in Santa Clarita Ca. This was the first night Chad used Pro-Line’s new Hole Shot SC tire in M3 compound, Chad also used the new Novak Ballistic 4.5 motor and Havok Pro SC ESC.
New from Spec-R are these suspension arms for the Xray T3 touring car. These new arms are shorter than the original versions by 1mm, which helps ensure better traction and handling. Made from a long lasting hard nylon, they are available for the front and rear of the car along with steering knuckles and rear uprights, which while similar in design to the originals, are made of the same material as the wishbones.
Source: Spec-R [spec-r.com]
Running a pre-production prototype of the Gambler SC truck, Venom’s own Rick McCrery took TQ and 1st Place in the Short Course Truck class at the annual Hank Perry 240 in Spokane, Washington. The 3-day race weekend saw a total of 265 entries across 9 classes and the popular Short Course Class had enough entries for a D Main. Despite tricky weather conditions and rain delays that only allowed for two qualifying heats, the Gambler proved that it’s up to speed against other manufacturers’ platforms by taking the top qualifying position, the win and fastest lap. The Venom Gambler will be released to the public later this summer.
Source: Venom [venom-group.com]
