Red RC » P Off Road

February 23, 2019

Pro-Line Slide Lock MC 1/8th buggy tyre

Coming from Pro-Line is the Slide Lock 1/8th buggy tyre in MC clay compound. The Slide Lock is a unique tyre design from Pro-Line that is made specifically for smooth, low grip tracks. It features a pattern of small, tightly packed hexagon and triangle shaped pins so drivers can lay down as much rubber as possible. The tread on the tyre is laid out wider across the carcass for a flatter profile overall compared to other Pro-Line 1/8 race tyres. Each hexagon pin has a deep sipe down the middle of the tread for added flex and grip on even the slickest of surfaces. The built-in tread flex means drivers can run harder compounds for longer wear and still have good traction when they need it. The large and stiff side pins reach far down the sidewall to reduce edginess as much as possible. The tyre comes including blue closed cell inserts and in the proven MC clay compound.

Source: Pro-Line [prolineracing.com]

February 22, 2019

Performa Racing P1 nitro engines

Performa Racing have introduced their new P1 3.5 nitro engines developed by IFMAR World Champion, Adrien Bertin. First up is the Nitro 3 engine, a 3 port power plant that combines excellent fuel efficiency and run time with the traditional aggressive bottom end and strong mid through top end of a 3 port design. Made with weekly racing in mind the engine is ideal for both buggies and trucks. The second new engine is the P1 Radical 3 that provides a smooth, linear power band with strong bottom through top end. Excellent run time makes this engine ideal for buggy racers that like a smooth engine with power on tap at all times. Last but not least comes the Radical P1 7 port engine that provides tremendous torque with exceptional top end. A linear power band makes it very drivable despite the insane power of the 7 port design – ideal for buggy or truggy racing on large tracks. The engines will become available by mid-March with Performa Racing also offering specially tuned, prepared, and run-in engines carried out by Adrien himself.

Source: Performa Racing [performaracing.com]

February 22, 2019

Xray XB8 series medium rubber shock membrane cell

Xray have introduced their new medium hardness rubber shock membrane cell set for XB8 based buggies, trucks and GT cars. The special design of the volume compensator provides a smaller air gap compared to conventional rubber diaphragms, resulting in more consistent damper action throughout the whole run. The red medium hardness cells will also offer more rebound compared to the previously released soft set, making for improved traction on smoother surfaces. The membranes come in sets of four and they are usable for the nitro and electric variants of the XB8, XT8 and GTX.

Source: Xray [teamxray.com]

February 22, 2019

T-Works RC8B3.1 graphite centre gearbox plate

Coming from T-Works and made for the Team Associated RC8B3.1 is a graphite centre gearbox plate. Designed to replace the standard aluminium part, the plate will add looks and functionality and it comes including two metal bushings for a smooth support of the brake cams.

Source: T-Works [rc-tworks.com]

February 21, 2019

Axial 1/18 Yeti Jr Can-Am Maverick X3 T 4WD

Horizon Hobby have introduced the new 1/18th scale Yeti Jr Can-Am Maverick X3 T 4WD brushed RTR off-road vehicle. The Yeti Jr RTR takes everything modellers admire about the 1/10th scale Yeti chassis and shrinks it down to 1/18 scale – then tops it off with a licensed Can-Am Maverick X3 body for a fun 4WD that anyone can handle. Out of the box, this tiny terror is ready for scale adventures. Before the Yeti, the only place to find an independent suspension with floating solid rear axle was in full-size off-road vehicles. Axial carried its advantages over into RC rock racers and crawlers. The suspension design give the Yeti Jr responsive handling, increased clearance, and improved stability at high speeds. Its included 380-size motor adds the perfect amount of speed and torque, controlled by the Maxxis Bighorn 2.0 radial tires, the Spektrum brushed speed controller and the Spektrum STX2 transmitter. The package is rounded out by a 7.2V 1300mAh NiMH battery pack, a USB charger and AA batteries for the transmitter, making the vehicle a true ready-to-run kit.

View a list of the features and more images here

February 21, 2019

HRC Racing 68110DMG digital standard size servo

HRC Distribution have introduced the HRC Racing 68110DMG digital standard size servo. Developed for 1/10th scale on-road and off-road classes, the servo features double ball bearings, sturdy metal gears and it comes with a heavy-duty 22AWG receiver wire. The servo’s waterproof case allows the use in unfriendly environments, making it ideal as a replacement for standard RTR kit servos.

View a list of the specifications here

February 21, 2019

Kyosho Turbo Optima 1/10th 4WD buggy kit

First seen at the recent Nuremberg International Toy Fair in Germany, Kyosho have now revealed more information on their forthcoming new re-release Turbo Optima 1/10th scale 4WD vintage buggy. Based on the iconic mid-1980’s Optima buggy, the original Turbo Optima back in the days featured race-proved optionals such as larger diameter tyres, larger volume shock absorbers, front and rear anti-roll bars as well as the 8.4V compatible Le Mans 240S brushed motor. Many of these features now also found their way into the re-release model that in addition sports a full assortment of gold-colour chassis and suspension parts, modern threaded aluminium shock absorbers, a slipper clutch, as well as newly designed 50mm/2.0” block tread tyres for improved traction. The Turbo Optima’s body shell was faithfully recreated and the updates, such as the 48 pitch drivetrain gears and the belt drivetrain, allow to use today’s powerful brushless motors and LiPo battery packs. The buggy is set for a release in March.

View a list of the key features and more images here

February 21, 2019

T-Works MP10 & MP9 aluminium centre driveshafts

Coming from T-Works and made for Kyosho’s Inferno MP10 and older MP9 buggies are several aluminium centre driveshafts that were developed to reduce the drivetrain’s rotational masses. The MP10-specific set includes 117mm and 85mm alloy dogbones while the MP9 TKI4/3 and MP9E compatible set comes with 115mm and 87mm long variants. Last but not least is a set specific to the MP9E Evo with 149mm and 56mm long driveshafts. All all made of high-quality 7075-T6 aluminium, they come with a black, hard-anodised surface for wear and also include high-quality outdrives. All dogbone driveshafts are also available separately for spares or repair.

View the other sets here