Red RC

March 26, 2010

DNM Tech High performance clutch

DNM Tech have released their new high performance clutch, the result of 4 months of development and which has been under test by club and national level racers. The clutch offers fast acceleration due to its reduction of rotating mass and on top of that, the clutch is affordable for all racers and can be purchased in maximum performance or more economical package (aluminum bell / steel bell). The lightweight design, offers a 60-70% reduction in weight compared with some original clutch set. The set includes everything you need, with the exception of pinion gears, and is available for the Xray NT1 and Kyosho V-One series.

Source: DNM Tech [dnm-tech.com]

March 25, 2010

Rob Betts wins big at ROAR Region 1 Champs

Kyosho America are reporting on the ROAR Region 1 championship was held at LIR at the beginning of March. The event had a great turnout with Kyosho cars dominating the event. In Mod truck, Andrew Parente was able to TQ putting in 21 laps in round 2. It was the only 21 lap run of the weekend in the truck class. At the tone Parente made a bobble that allowed Rob Betts and James Schlick to get past. The three of them set off on a six minute battle where they ran nose to tail for most of the race. In the end, Rob Betts came home with the wind and the championship! James finished second and Andrew finished third. The three of them crossed the line within 1.2 seconds of each other, giving Team Kyosho 1, 2, 3 win.

Continue reading the report here

March 25, 2010

RPM Blitz rear bearing carriers

RPM Products have release rear bearing carriers for the HPI Blitz & Blitz ESE. To improve the overall stength of this area, they gave the part a bearing overhaul. The stock bearings are a 5x10mm design, which they claim is not strong enough for racer’s demands, so these new RPM carriers use a 5x11mm bearing, doubling the dynamic load rating from 44kgf to 73kgf. Made from RPM’s bulletproof blend of super strong nylons, they are factory backed with the company’s industry renowned breakage warranty.

Source: RPM [rpmrcproducts.com]

March 25, 2010

Pro-Line Trencher SC & close cell SC inserts

Pro-Line have shown off their new Trencher SC and close cell SC inserts. This tire will be molded in M2 and is intended to be an awesome All-Terrain option for SC trucks. The aggressive tread will exhibit long life in both on and off-road conditions. Also shown are Pro-Line’s SC dedicated Closed Cell inserts. These inserts are no longer a multi purpose 1:8th insert but are a dedicated asymmetrical design that is engineered for ideal sidewall support in Pro-Line SC tires. The upgraded inserts are being included in all SC tires at this time.

Source: Pro-Line [prolineracing.com]

March 25, 2010

Daniel Vega wins Rd5 of Central Spain regionals

The past weekend in Azuqueca de Henares in Guadalajara, Spain Team Agama Racing, Team Orion and Aka Tires won the fourth race of the Spanish center regional series. Daniel Vega Frias won the A main, starting the final from tenth position due to a battery problems in the semifinal. Using the new Agama A8-Evo, it worked perfectly throughout the event, showing the potential of this new brand.

Source: SIIM [silcarimport.com]

March 25, 2010

Much More Impress 3600 LiPo pack

Much More have released their new Impress 30C 3600mAh LiPo pack. This high quality Sub-C configuration pack features a hard case, whose bottom is consistent with the battery slots, improving the mounting stability.

Source: Much More [much-more.co.kr]

March 25, 2010

3h race at Oberhausen cancelled

The 3-hour race for 1/10 scale nitro touring cars which was supposed to be run the upcoming Saturday at Oberhausen in Western Germany has been canceled. Following the insufficient number of entries the organising MRC Alstaden Oberhausen had no other option than to refuse this long distance race. Nevertheless, in case of a lively interest it is still possible to held the event later this year. Furthermore this cancellation means that the opening of the 2010 nitro on road season is postponed for one week only. At the Easter weekend (03/04 April) the first round of the Nitro West Masters, open for 1/8 and 1/10 nitro cars, will take place at Oberhausen.

Source: Nitro West [nitro-west.de]

March 25, 2010

RPM Blitz rear bearing carriers

RPM Products have release rear bearing carriers for the HPI Blitz & Blitz ESE. To improve the overall stength of this area, they gave the part a bearing overhaul. The stock bearings are a 5×10mm design, which they claim is not strong enough for racer’s demands, so these new RPM carriers use a 5×11mm bearing, doubling the dynamic load rating from 44kgf to 73kgf. Made from RPM’s bulletproof blend of super strong nylons, they are factory backed with the company’s industry renowned breakage warranty.

Source: RPM [rpmrcproducts.com]