February 5, 2019

Xray XB2 short 2-pad slipper clutch set

Coming from Xray and made for the XB2 2WD buggy is the new short 2-pad slipper clutch set. The redesigned slipper clutch allows the rear shock absorbers to be mounted in front of the rear arms. The frontward position increases stability on surfaces where the rear of the car collapses, particularly in high-speed corners. Team drivers also prefer this position on low-grip tracks. The 2-pad slipper clutch ensures super-smooth clutch operation and efficient, consistent braking. It is very easy to make ultra-fine adjustments to the slipper clutch externally. The slipper pads are made of ultra-efficient SLS material with very-high slip efficiency, thus allowing very precise adjustment. The lightweight slipper plates are machined from premium Swiss 7075 T6, additionally hardened before a final black surface treatment. The plates also have a machined relief which decreases the friction surface to assist with clutch slip adjustment. The set includes the slipper clutch assembly, 75T and 78T 48 pitch spur gears as well as a new motor plate.

Source: Xray [teamxray.com]

February 5, 2019

Yokomo YZ-2T front stabiliser kit

Yokomo have introduced a front stabiliser set for the YZ-2T 1/10th 2WD stadium truck. Including three anti-roll bar wires of 1.3mm to 1.5mm, the set allows to fine-tune the truck’s handling for better stability on medium to high-bite surfaces. The set is a direct fit and it comes including mounting hardware and individually marked swaybars.

Source: Yokomo [teamyokomo.com]

February 5, 2019

RPM Revo 2.0 front arms

Coming from RPM and made for the Traxxas Revo 2.0 truck are left and right front arm sets. Traxxas has upgraded the arms for the 2.0 version of the popular truck, however when the goings gets hard, the arms can still become a weak point of the truck. While offering greater durability thanks to RPM’s renown nylon comping, the design of the arms with angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping creating harm. While offering more durability than the standard arms, RPM’s variants also scrub about 10g of weight a pair, improving suspension efficiency. The front A-arms are moulded from RPM’s indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm, as sets for the left or right hand side of the truck and in black or blue colour.

View the other arm sets here

February 5, 2019

Reedy RC2312 HV digital competition crawler servo

Team Associated have introduced the Reedy RC2312 HV digital crawler servo. Trail-tested and engineered for use in competition-level trail trucks and crawlers, the powerful motor creates incredible torque without sacrificing speed, while an advanced microprocessor provides precision steering control. An all-metal gear set is designed for strength and durability while an integrated aluminium mid-case reduces operating temperatures for fade-free operation. The soft-centring function centres the servo slowly on power-up for scale appearance and steering system damage prevention. High voltage compatibility allows users to take advantage of external BEC units.

View lists of the features and specifications here

February 4, 2019

Team Zombie Hollow Evolution motor cooling system

Team Zombie have introduced their new Hollow Evolution motor cooling system. The 40mm motor cooling fan features a dedicated duct-type housing that is part of the whole fan assembly, rather than just a computer-type can sitting in an additional case. The result are 12g of static pressure and thus exceptional cooling performance thanks to the optimised airflow design. The 6V to 8.7V compatible and dual ball-raced fan uses an injector-moulded case, it weighs in at 18.5g and complies with the latest Australian RCRA rules.

Source: Team Zombie [team-zombie.com]

February 4, 2019

T-Works roll out first MP10 option parts

T-Works have released first option parts for Kyosho’s all-new MP10 1/8th off-road buggy. The range includes a 26-piece hard-coated aluminium pivot ball set, a titanium turnbuckle set as well as two screw kits, a 149-piece titanium UFO head set as well as a 160-piece gold-plated steel screw set. The pivot ball will greatly reduce the overall weight and unsprung mass of the suspension while the titanium items will scrub weight and add corrosion resistance. The gold-plated screw set will do nothing in terms of weight but add a lot of visual impact. Last but not least is a 10-piece set of stainless steel 0.1mm and 0.5mm thin 4.5x10mm shims that can be used to reduce axial play in various places.

View the other new parts here

February 1, 2019

SWorkz pipe spring lock

Coming from SWorkz is a nitro exhaust pipe spring lock that prevents the exhaust from coming loose. The machined aluminium part adds security and a piece of mind when running in long mains or bumpy track conditions as it can prevent the exhaust pipe from rattling loose. The spring lock is usable with most nitro off-road and on-road kits.

View another image here

February 1, 2019

R1 Digital-3 brushless speed controller

New from R1 Wurks comes the LCG Digital-3 2S/1S wireless programmable brushless speed controller. Developed using the most advanced microchip processor and a robust proprietary software, the speedo delivers some of the most technologically advanced features to date. Development of the LCG controller was focused on ultra smooth power delivery needed for modified racing as well as supreme power efficiency for stock motors. The unit features an A.C.L.C. Advanced Component Level Cooling system. This design allows individual encapsulated low resistance Mosfets – inner and outer components – to transfer heat directly to the upper heatsink. The system also comes equipped with an all new zero timing blinky mode for spec racing, using an advanced commutation algorithm called Cool Power to keep the motor cool and deliver powerful, yet ultra-smooth acceleration. The LCG Digital-3 boasts a redesigned case minimising overall weight and lowering the centre of gravity. R1 Wurks have minimised the weight from the upper case while improving heat dissipation, achieved by improving air velocity exits from all sides of the ESC case. All adjustable settings are easily programmed using the R1 Wireless Adapter coupled with an iOS or Android app designed with an intuitive, easy to use interface. The new R1 Digital-3 app also features a super-fast live telemetry and a built in datalogger for after race analysis. Built in Amp draw meter for setting motor timing or for after race analysis. Using the new over the air updates feature, firmware updates are now easily downloaded through our iOS or Android apps.

View lists of the features and specifications here

Mibosport
VP Racing
T-Works