Red RC

July 31, 2008

Losi Bearing & Clutch service boxes

New from Losi for use with their 8ight range of chassis’ are two new spares boxes. The first box contains a complete ball bearing set for all 8ight-based race and RTR models and comes in a reusable box. This boxed set includes all of the necessary bearings you need, and is a cost-effective alternative to purchasing individual bearings. Losi have also released a clutch rebuild and service set, which includes all the service and tuning parts necessary for rebuilding the 8ight and 8ight-T clutch in one box.

Click more to see the clutch rebuild box… content

July 31, 2008

Southport Nationals report by oOple

Our friends at oOple are reporting on the recently held Southport National, the penultimate in the 2008 BRCA National series, which saw the 2WD title decided early, with another TQ and win for Ellis Stafford driving the XFactory X6. Ellis was in command and took three qualifying rounds to take the TQ, and won the second and third A final legs to take the meeting, and with the valuable points secure the 2WD championship title in the process. Neil Cragg had a surprise up his sleeve in the 4WD event, the new Yokomo B-Max4 had made it after all. After Yokomo flew around the world to deliver the car the Thursday before the event, Neil didn’t hold back, taking all four rounds of qualifying and the first two A final legs. Only a win from Lee Martin in leg three with Cragg second, stopped a ‘total domination’ from the Craggster.

Read the full report here, including lots of great photos and interviews.

Source: oOple [oople.com]

July 31, 2008

Xray XB808 CVD drive axles

New from Xray for the XB808 are these CNC-machined CVD drive axles, which have been made from premium lightweight Swiss 7075 T6 hardcoated aluminium. Strategically-machined, super-lightweight drive axles are specially designed and produced for high-competition racing. The reduced weight is almost 3x less than the stock wheel axle, with a total weight saving of up to 20g for all 4 wheel axles. Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hard coating is done at Xray’s own in-house fully-robotic hard coating line, ensuring a perfect hardcoated surface every time.

Source: Xray [teamxray.com]

July 31, 2008

Euros 1/10th Second Practice update

Elliot Harper

Second practice for the 2008 EFRA 1:10 EP Touring Euros has been run here in Vila Real but with no official timing the picture of who is doing what is still uncertain as drivers continuing to still settle themselves in. Elliot Harper, winner of the Warm-Up Race back in June, says it is a lot hotter and as a result the track characteristics are very different now. The emerging UK talent, who just took his first British National win two weeks ago, says his Nosram powered Xray is working well but with the extra heat it is going off slightly at the end of the run. Harper will make a few changes to fine tune the car for the first of the two timed runs this afternoon.

Check out the full coverage on our event site here.

July 31, 2008

Euros 1/10th – Practice update

Jilles Groskamp

Drivers have had their first official practice run at the 2008 EFRA Euros here in Vila Real with most drivers reporting an incident free run. Jilles Groskamp suffered the biggest drama of the morning when he lost a front wheel off his Tamiya. ‘I adjusted the front camber just before my run and when I put on my front wheels I tightened the nuts by hand and then afterwards forgot to do them up properly. It was a novice error but then I am a novice driver.’ With all four wheels on his car, the Dutch racer said his car felt pretty OK.

Check out the full coverage on our event site here.

July 31, 2008

VP-Pro Receiver battery packs

VP-Pro have released a pair of receiver packs for gas gars, available in both stick and hump pack configurations. Made using 2/3A 1500mAh NiMh cells, the packs are developed in collaboration with EP and feature hi quality soldering tags to ensure increased voltage output together with lower internal resistance.

Source: VP-Pro [vp-racing.com]

July 31, 2008

Edit high output Glow igniter

Edit RC have released this new high output Glow igniter. Featuring a 3000mAh 1.2v Cell, this provides long lasting power for while you’re out bashing or thrashing your car or truck. Supplied with an overnight charger to fully charge your igniter while you sleep, it is suitable for all vehicles with Nitro powered engines.

Source: Edit [rcedit.com]

July 31, 2008

Novarossi Exhaust Gas Cooler

As seen for the first time here on Red RC, Novarossi have announced that they are released their Exhaust Gas Cooler. Mounted between the tuned pipe and the fuel tank, it will take away some heat from the exhaust gas that goes into the fueltank, lowering the temprature of the fuel and increasing the runtime. Available in late August, the cooler will be sold in anodised purple.

Click here to see another picture… content