Red RC

April 18, 2009

H.A.R.D. Racing 1/8th On Road Setup system

H.A.R.D. Racing have once more expanded their current line of setup tools to include a 1/8th scale on road setup system. Precision machined from aluminium plate, and hard coated, this system is similar to previous versions from the company which has the side plate attached to the main plate by the lower side knob. On conventional systems where the 2 plates connect at the top point, sometimes the main plate cannot move freely and it may cause some accuracy problems. Sold in a set of 4, for each corner, they are supplied in a handy carry case and can be assembled and disassembled with ease.

Source: H.A.R.D. [hard-racing.com]

April 18, 2009

Leehove JVD-RC clutch system

Dutch company Leehove has announced a new clutch assembly they have developed for 1/8th nitro off road and rally-game cars, the JVD-RC clutch. After 6 months of development and testing by a team including Dutch Truggy Champion Bas the Koninck, the final clutch is suitable for any clutch bell with an inside diameter between 26mm and 26.8 mm and a minimum internal length of 10mm. Delivered as a complete system which consist of a flywheel, crown, four clutch shoes, 12 springs in different tensions (green 0.9mm, 1.0mm gold, silver 1.1mm in sets of 4), the cone, a special flywheel nut and a set spacers to shim the flywheel. The clutch comes pre-mounted with 4x 1.0 mm springs and the installation of the clutch is very easy because the ‘crown’ brings the springs to tension during the assembly, and loosens the springs for dis-assembly.

Click here for another picture

April 18, 2009

Follow us on Twitter @redrc

We would like to announce that updates from Red RC are available on the micro blogging platform, Twitter. On our page @redrc we are streaming the latest news headlines as well as regular updates from our race travels, insights and more. If you are already on Twitter, please follow us and if you are not on Twitter then check it out at twitter.com and if you sign up then be sure to follow us. In addition you can find us on Facebook, on both our Red RC Fans page (need to be a member of FB) and personally – Eoghain O’Briain (Chief Editor), Sebastian Suerstedt (Features Editor) and Oisin O’Briain (Events Editor), so feel free to friend us up as we would like to get to know our readers better.

April 18, 2009

Caster Racing Fusion RTR Brushless truggy

Caster Racing have announced the release of their Fusion 1/8th brushless powered RTR truggy. Coming supplied with ‘half’ offset LPR rims and tires and new CNC machined T6 6061 high quality aluminium parts throughout, it is equipped with a powerful 80A Brushless ESC with Fusion 36/74 1880 KV XXL motor, front CVD and 4 dog bones as well as a 9kg full metal steering servo. Well balanced thanks to the battery placement this car shares most of the same parts with the K8T GP making the conversion from gas to electric not a problem.

Source: Caster Racing [casterracing.com]

April 18, 2009

Shepherd 15T Velox clutch pinion

Shepherd Micro Racing have extended their range of clutch pinions for the Velox competition clutch. The 15T pinion is the right choice for small and tight tracks where a lot of bottom power is needed. Like all Shepherd clutch pinions, the 15T has been manufactured from strong lightweight 7075 T6 aluminium and hardcoated to reduce wear and friction. It also features a laser engraved number for easier recognition.

Source: Shepherd [team-shepherd.com]

April 18, 2009

Vampire Racing X-6 Alu Toe-in Bar

As used in our review of the new X Factory X-6 squared, Vampire Racing have released their aluminium toe-in bar, which is also suitable for the X-60. Made from high quality aluminium, the blue anodized part adds extra strength to this vital area of the car and are available separately in 3 or 4 degree versions or you can purchase both versions in a set.

Source: Vampire Racing [vampire-racing.com]

April 18, 2009

Xray News Round-up

Here we have this weeks round up of product releases and race reports from our site sponsors Xray. Our summary includes everything published by the Slovakian manufacturer on their own website in the past week, so if you didn’t find the time to visit, be sure to read on.

Click here to view the round up

April 17, 2009

Caster Racing Turnbuckles & Clutch bells

Caster Racing has released two new aluminum turnbuckles for use on buggies track rods. Anodised black, and sporting the Caster Racing logo as well as size on the side, they are available in both 4mm and 6mm versions. Caster have also released a range of 3 new clutch bells for use in buggies made from special S4 steel that come in 13T, 14T and 15T.

Click here to see the clutch bells