Red RC

November 29, 2007

Much More Commu Lathe 2

Much More have released the follow up to their original commu lathe with the release of this updated version 2. As with all Much More products, it is available in blue, purple and black, and this new version sports an adjustable arm limiter that allows you to adjust the correct play of the comm when cutting. Also new from Much More is a range of appropriately coloured comm lathe lights that shine down onto the area you are cutting ensuring that you can see exactly what you are doing.

Click here to see the lamps and other commu lathes… content

November 28, 2007

Xray T2’008 Exclusive first batch

Xray T2′008 Exclusive first batch

Along with announcing that the T2’008 190mm touring car is now shipping, Xray also announced that the first batch only will be supplied with aluminum externally-adjustable ball differentials. This is due to the fact that the mold for the new Composite Diffs was not finalized for mass production in time for the export of kits, and as such the first batch of kits feature this aluminum version. The US Foam-Spec edition features two alu ball differentials and the EU Rubber-Spec edition features the aluminum ball differential in rear only. Both kits include the appropriate amount of the new 3.5mm drive shaft composite blades.

Source: Xray [teamxray.com]

November 28, 2007

Vita Tuning clutch tool

Vita Tuning from Germany has created this handy clutch assembly and disassembly tool, and will be made available under the All Mod and Reckward Tuning brand names. Designed to work with the Speed 2.5 buggy clutch and Speed 2.5/28 truggy clutch, the tool helps the user mount the shoes by making it simple to pop the shoe springs into place. This is done by putting the shoe onto the flywheel pin, place the tool over the end of the crankshaft and turning it anti-clockwise, while pushing, to remove them again just do the same but pull.

Click more to see the All Mod version… content

November 28, 2007

Kevin Brunsden joins Team Xray

Mirage Racing have announced that top UK racer Kevin Brunsden has made the switch over to Team Xray to race the XB8EC and XT8 for the 2008 season. Kevin is a well know National winning touring car driver that recently made the switch over the ultra competitive 1/8th buggy class last season and immediately impressed. Kevin will be using Falcon Engines and GRP tyres at all Nationals this coming season and will certainly be a regular contender at the top of the timesheets.

Source: Mirage Racing [mirageracing.com]

November 28, 2007

Ener-G 4600 Ni-MH Cell

Pro Match Racing have announced the impending release of this new all new EnerG 4600MAh cell. Created in partnership with SMC Racing, this high drain type Ni-MH cell will go on sale from the 10th of December and will provide lots of power as well as great run times. Expect more information closer to its release.

Source: Pro Match [promatchracing.com]

November 28, 2007

Alex Laffranchi Win Radiosistemi Trophy

Xray are reporting from the recent Radiosistemi trophy that was run for 1/8th scale off road in Toscana, Italy. A total of 81 senior drivers and 41 junior drivers were present to run on the bumpy track, where a perfect set-up was necessary to contend with the bumps, while at the same time being quick. In the senior class, it was Crono racer Davide Tortorici that got TQ followed by another Crono, that of French racer Jerome Sartel in 2nd. In the final everyone managed to get a good start with Sartel leading, followed by Tortorici, Laffranchi, and Perin. Laffranchi was fastest and after some great driving managed to take the lead. With the Xray racer up front, Tortorici then ran into some problems due to the difficult track conditions and dropped back, leaving Jerome Sartel and another Crono driver Stefano Rossi to finish in 2nd and 3rd place.

Source: Xray [teamxray.com]

November 28, 2007

Academy GV2 RTR EP 2wd Buggy

Korean manufacturer Academy have released a ready to run version of their electric powered 1/10th scale 2wd buggy, the GV2. Supplied with a pre painted body, the car comes fully assembled and includes pre made oil dampers, electronic speed controller, 7.2V battery with charger, RS540 motor and pistol grip radio. The car uses the same geometry as the competition version and also features rear gear differential, multi length pivot system, moulded drive shafts and finally a 3 piece moulded chassis.

Click here to see more photos… content

November 28, 2007

VP Pro 1/8th Buggy Tires

VP Racing 1/8th Buggy Tires

VP Racing have introduced these team series VP-Pro 1/8 Buggy Racing Tires. Available in 3 different patterns, they are supplied with the molded foam insert and have been extensively tested to bring the tire quality and performance up to the same standards as other top brands on the market. VP-Pro also aim to release similar tires for truggies in the near future.

Source: VP Pro [vp-racing.com]