Red RC » P Off Road

June 5, 2024

Team Brood B7 Carbon Fibre Transmission Brace Kit

Team Brood Racing has announced this Carbon Fibre Transmission Brace Kit designed specifically for the Team Associated B7 2WD Buggy. The new kit addresses the increased flex on the left side of the transmission case caused by the thickening of the motor plate from 3mm to 5mm on the right side, which has led to a higher incidence of idler gear failures compared to the B6 series of buggies. The kit is a straightforward, bolt-on performance upgrade that requires no permanent modifications to your buggy. Made from high-grade 1.5mm thick carbon fibre and precision CNC cut, the brace is engineered to match the stiffness of the right side of the transmission case, effectively eliminating the flex that causes idler gear failures. The kit includes three of our 6061 ball stud washers, available in various colours, to ensure the brace sits on a flat, level surface. To accommodate the brace and ball stud washers, screw length must be increased from 16mm to 20mm. Three M3x20mm button head screws are provided in the kit, but users can opt for their own screws, including titanium screws.

View more images here

June 5, 2024

RDRP B7 -1° Alu HD Suspension Mount C

RDRP has added a -1° Aluminium HD Suspension Mount C to its expanding line-up of premium option for the Team Associated RC10B7 and RC10B7D buggy. Compared to the standard suspension mount, this mount is slightly wider and reduces the rear axle toe-in by 1° per side, allowing for 0° toe-in configuration. Unlike the B6.4 version, where a similar suspension mount was offered from RDRP as a D Suspension mount, this is now a C suspension mount. This change does not reduce the vehicle width, and so helps especially on astroturf and carpet tracks to free up the car.

Source: RDRP [revolution-rc.com]

June 3, 2024

Revolution Design B7 Alu Ultra HD Shock Towers

Germany’s Revolution Design Racing Products continues it release of option parts for the Team Associated RC10B7 1:10 2WD Buggy with the addition of front and rear B7 Aluminium Ultra HD Shock Towers. These premium upgrade are parts made from robust 7075-T6 aluminium and match the standard kit geometry but offer increased durability, improved suspension efficiency, and precision. Thanks to identical stock mounting positions, they are direct replacements and do not require any setup modifications after the part change. Finished with chamfered silver edges the shock towers visually stand out.

View more images here

June 3, 2024

Schelle B7 Aluminium Steering Rack

New from Kurt Wenger’s Schelle Racing Innovations brand is this Aluminium Steering Rack for the Team Associated RC10 B7 1:10 2WD Buggy. Secure and tighten the steering assembly on your B7 or B6.4 series with the Schelle Aluminium Steering Rack. Updated to use 3x7x3mm bearings and crush tubes, the system does not use the 2 top-hat bushing thru the kit molded steering rack. Changing to the CNC Schelle steering rack will remove some slop and add durability to the assembly without making the car feel on-edge. Available in black or blue anodise finish, the rack fits both B7 series and B6.4, T6.4, SC6.4 series.

View Rack assembled here

May 31, 2024

RDRP RC10B7 0° and +/-2.5° Steel Bulkheads

Continuing its run of aftermarket premium upgrade parts releases for the Team Associated RC10B7, RDRP has added these 0° and +/-2.5° Steel Bulkheads to its range. Designed to replace the standard bulkhead of the RC10B7 and RC10B7D buggies, they increase weight of 26g compared to the standard aluminium part increases the steering and helps to keep the front end on the track, which especially helps with high traction surfaces like carpet or astroturf. These bulkheads are made from high-grade steel, offering superior stability and durability. With heat treatment and a black oxide coating, the bulkheads are particularly resistant and long-lasting.

View more images here

May 31, 2024

RSRC MP10 carbon fibre parts

RSRC, the brand of multiple European 1:8 Buggy Champion and factory Kyosho driver Reno Savoya, has released two new carbon fibre parts for the MP10 platform. First are carbon fibre arms stiffeners which are designed as a “sandwich panel” system that leaves the internal reinforcements of the suspension untouched, with a 1mm plate on top and a 1mm plate underneath. This will greatly improve the wishbone strength during big hits but also improves the precision of the buggy’s handling. They fit both the MP10 nitro and MP10e electric buggy. Second is a carbon fibre chassis brace for MP10e/MP10Te. Unique and very good looking, the chassis stiffener will increase the car reactiveness but also hold the cables for a neat environment.

View Chassis Brace here

May 31, 2024

Yokomo’s first 4WD Buggy set for Summer re-release

Following the successful re-release of its 1980’s ‘Super Dog Fighter’ 1:10 4WD Buggy late last year, Yokomo has announced that it is to re-issue its first ever 4WD Buggy, the YZ-834B Dogfighter. Publishing CAD images of the buggy, which are ‘are of a product under development’, the Japanese manufacturer explained, ‘In response to requests from many users, we have decided to re-release Yokomo’s first 4WD off-road car, the YZ-834B Dogfighter! Based on a resin main chassis, it features a distinctive chain-driven 4WD system, front and rear monoshocks, front double wishbone suspension, rear trailing arms, and more, allowing you to fully enjoy the atmosphere of the time. Of course, spare parts are also provided so that you can enjoy driving it properly, and you can fully experience the excitement of a representative off-road car from the 1980s, so please look forward to it!’ While no specific launch date is given, they have targeted a Summer time release for the YZ-834B Dogfighter saying they will release more information on the kit on their social media and newsletters from ‘time to time’.

View other CAD image here

May 30, 2024

R1 Wurks B7 Carbon Fibre Motor Mount Top Support

Another new aftermarket optional for Team Associated’s RC10B7 2WD Buggy is this ultra lightweight motor plate from R1 Wurks. It enhance the stability of your motor by providing additional mounting support by relocating one of the mounting points to the top. As a result motor flex at the mounting surface is minimised for a sturdier and more secure motor installation. This motor plate not only offers the advantages of a cross-supported mounting configuration but also features multiple layers of high-strength carbon fibre. The outer layer is made of forged carbon fibre in an epoxy matrix, creating an exceptionally stiff mount that significantly reduces weight.

View Motor Mount fitted here