March 4, 2018

Schelle B6.1 alloy rear hubs & low front wing mount

Schelle Racing Innovations have introduced new option parts for the Team Associated B6.1 buggy in the form of alloy rear hubs and a low front wing mount. Starting with the rear hubs, the proven 2-piece design allows fine-adjustment and increases durability as the upper cap design can space away from the main hub with ballstud shims, allowing racers fine in-between adjustments for the rear upper link location. The upper caps are shared with the B6 and B64s design, with the same parts used both left and right. The upper cap design with a shorter washer stack reduces leverage on the outer ballstud, as well as increasing shock clearance for the turnbuckle. The hubs are available for the 67mm driveshaft setup in the B6.1 and B6.1D kits, they come in black or blue finish and they are also available as the B6.1 Carpet Hub Set, a black version which comes with -2mm upper caps and ballstuds specifically for carpet racing.

Continue reading here

March 3, 2018

Schelle Racing Innovations B6.1 limited edition starter kit

Coming soon from Schelle Racing Innovations is the limited edition Starter Kit for the Team Associated B6.1 buggy. The set contains the essentials that Schelle would bolt onto a fresh B6.1 kit to take it up a notch, such as the B6 Extreme battery strap, blue aluminium steering rack, carbon fibre wire caddy, tungsten carbide diff balls and ceramic caged thrust race as well as the B6.1 low front wing mount. The set is available for pre-order now and will be up for grabs soon.

Source: Schelle Racing Innovations [schelleracing.com]

March 2, 2018

HB Racing Gridlock V2 1/8th buggy tyre

Following the introduction of HB Racing’s new 1/8th buggy pre-mounts comes a new tyre, the Gridlock V2. Based on the original Gridlock tread, the V2 design features staggered blocks for more lateral grip compared to the original tyre. New sidewall blocks help on bumpy tracks and make the Gridlock V2 easier to drive and not as edgy for the driver. The V2 is a durable design with longer life than HB Megabite tyre and it is mounted on HB Racing’s version 2 dish wheels, available in yellow and white, that are 20 percent lighter than the original version. The pre-mounts are built using black closed cell inserts and they are available in Pink super soft, Red soft and White medium compound.

View a detail image of the tread here

March 2, 2018

RC Cars Cavalieri Mattioli Edition MBX8 rear shock tower

RC Cars Cavalieri from Germany have introduced the Mattioli Edition rear shock tower for the Mugen MBX8 buggy. The carbon fibre shock stay allows to use the HB Racing 817 series rear wing mount which is a common choice for many drivers these days. Apart from being different in the wing mount area the shock tower is understood to features standard MBX8 suspension geometry settings.

Source: RC Cars Cavalieri [rc-cars-cavalieri.com]

March 2, 2018

Lunsford EB410 LE 3.5mm Super Duty Ti turnbuckles

Coming from Lunsford and made for the Tekno EB410 buggy is a limited edition set of titanium-nitride-coloured 3.5mm Super Duty titanium turnbuckles. They are made of high-quality Grade 5 titanium and included in the set are four 40mm and two 55mm turnbuckles as well as a 1/8” drill bit to slightly open the Tekno rod ends as the turnbuckles are 0.5mm larger in diameter compared to the stock parts.

Source: Lunsford [lunsfordracing.com]

March 1, 2018

JConcepts F2 22 4.0 body shell

JConcepts have introduced the F2 body shell for the TLR 22 4.0 2WD buggy. Designed with aspects learned from the original Finnisher bodies, the F2 provides an even more aggressive look with included details which remain crucial to performance. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps while the forward cab placement changes the performance and visible bias which help steering rotation in low traction corners. The side-pods have been simplified to remove unwanted changes in height to neutralise the at-speed handling and the rear of the pods have a dual step, scoop treatment which give a first in class look to the F2 body. The rear of the cab has the Finnisher step feature which allows the placement of a secondary side window and also several louver options off the rear. In addition to the newly designed body, JConcepts has included two of the latest Aero S-type rear wings to round out the package.

View more images here

March 1, 2018

Tekno EB410 alloy stub axles & composite diff gears

Coming from Tekno RC and made for the EB410 1/10th scale 4WD buggy are aluminium stub axles and composite diff gear sets. Starting with the stub axles, they are CNC-machined from 7075 aluminium, hard anodised for wear, and reduce the rotating mass as well as unsprung weight by over 5g per pair. They are a direct replacement for the stock steel stub axles and do not require any additional parts. Although these axles are tough, they are intended to be used for performance improvement in the highly competitive 13.5 4WD class and may not be as durable as the stock counterpart. The axles are available as separate sets for the front and the rear of the buggy.

Continue reading here

March 1, 2018

T-Works MBX8 spring steel centre diff joints

Coming from T-Works and made for the Mugen MBX8 buggy is a set of spring steel centre diff joints. The outdrives are a direct fit and sport a special surface treatment for wear as well as machined bearing and bevel gear seats for improved precision. The parts are also compatible with the MGT7 and older spec MBX series kits.

Source: T-Works [rc-tworks.com]

Mibosport
VP Racing
T-Works