Red RC

September 20, 2021

BRCA Clubmans Rd6 Aldershot – Report

Round 6 of the BRCA Clubmans series took the racers South to Hampshire, home of Aldershot Model Car Club. Saturday practice saw drivers our in shorts and tee shirts with the sun out all day. Seven rounds of controlled practice in heat order was the order of the day so the racers got plenty of track time. Sunday morning and what a change in the weather, yep the weather man got it wrong again. A very overcast start to the day was soon followed by fine rain for the first round of qualifying which turned into intermittent showers. The track never completely dried all day so wet tyres for the Touring cars and Formula One’s were needed.

Continue reading the report here

September 17, 2021

JConcepts DR10 & SR10 +2mm motor plate

JConcepts has rolled out a sweet looking replacement motor plate for the DR10 and SR10 vehicle line-up. With the evolution faster vehicles, drag racing, and speedy dirt oval racing, a serous crash is inevitable. Looking at the typical construction of the second operation processes on standard motor plates, it easy to see why bending is sometimes an issue. The design team at JConcepts has incorporated a honeycomb milling affect with placement more suited to surrounding geometry making the plate lightweight and very rigid in multiple directions. The honeycomb features add a 3D look featuring the natural aluminium while the rest is available blue or black anodised colours. The motor plate is compatible with the Team Associated DR10 and SR10 while remaining lightweight. Slight chamfering on the 3mm thickness material allows the rather beefy plate to look quite slim and trim. In addition, longer slots have been designed into the motor plate to allow larger pinion sizes to accommodate the needs of the hardcore racer.

View the plate machining here

September 17, 2021

MST RMX 2.5 RS black 1/10 RWD drift car kit

MST have introduced their new RMX 2.5 RS black 1/10 RWD drift car kit. Specially designed to be lightweight, this kit is fully loaded with the highest performance parts straight out of the box. It comes with a hardened plastic gearbox that supports RMX and RRX driving modes, and can have the motor mounted above or below the spur gear for different handling characteristics. Other new items over its predecessor include the 2.5mm carbon chassis, new upper deck and newly designed aluminium shock absorbers with adjustable length.

View more details & images here

September 16, 2021

Ruddog Racing RXS brushless speed controller

Ruddog Racing proudly presents the RXS brushless controller. The state-of-the-art ESC is the result of more than two years of development and testing. Packaged in a black-anodised all-aluminium case, a 32 bit processor and the latest FET technology provide an ideal basis for punchy and smooth power delivery, and a strong but sensitive brake function. Thanks to its integrated power button and an exchangeable receiver cable, clean and tidy installation is easier than ever before. In addition to the included fan, the aluminium case and low-resistance solder posts also improve heat dissipation. Settings can be adjusted with the optional program card to tailor the RXS to various track conditions and driving styles, both in highly competitive modified and stock racing.

View more details & images here

September 16, 2021

Yokomo BD10F stabiliser set & competition capacitor

Two new items from Yokomo, the first of which is a rear stabiliser set for the new BD10F FWD touring car. Since the rear stabiliser is not standard equipment on the BD10F, this set is effective when you want to improve steering response and improve performance on high-grip road surfaces. Three types of stabiliser bars (1.2, 1.3, 1.4mm) are included. Also new is a capacitor for racing that maximises the performance of your ESC. When the load becomes high due to sudden throttle operation it supplements the electric power and enhances the acceleration. Each cord is attached to the battery ± terminal of ESC, but since it is non-polar, it can be used regardless of which pole it is attached to.

View more images of the new items here

September 16, 2021

Xpress Dragnalo DR1S 1/10 4wd EP high power TC

Xpress have introduced their Dragnalo DR1S 1/10 4wd EP high power touring car. Traditional touring cars are designed for use with a 2S LiPo in line with a lot of racing standards set by the racing organisations. But with the advancement in both LiPo and brushless power systems, the DR1S was designed to handle much larger amounts of power. The DR1S was designed with the goal to handle all of that power. From Circuit racing to drag racing and 2S LiPo to 6s LiPo, the drivetrain was designed to deal with all of these high powered systems. For Drag racing application, this car was designed to withstand the power which the current 1/8th power plants are able to generate. The height adjustable wheelie bar was designed to minimise launch times and stabilise the car after launch.

View more images & details here

September 15, 2021

IGT8 GTe 2021 EP onroad platform

IGT8 are delighted to present their all new GTe 2021 platform. Following excellent results with the Nitro powered version, the US company have released this completely new model. Featuring a super narrow and compact chassis with an ultra low CG, it has a perfectly straight transmission for high efficiency and low resistance & wear. Utilising a two in one concept, the car is delivered with a double rear battery configuration but can be optionally transformed to a front side configuration. Other features include a ball raced built in flex system in the rear and the use of emulsion shock technology for smooth and consistent handling.

View more images of the GTe here

September 15, 2021

36Mood MBX8 aluminium rear hubs

New from 36Mood, brand of 2012 World Champion Robert Batlle, is this aluminium rear hubs for your Mugen MBX7, MBX7R or MBX8 kits. With these hubs you have an extra option on your rear roll centre, having a higher hole position and you can change your rear toe in with the three different long life inserts (kit comes with insert no.1). The design also has the standard up and down position if you need more traction or less traction in your track. These hubs come with all mounting hardware.

View more images of the uprights here