Red RC

May 15, 2020

Mugen Seiki Racing MBX8T LE Factory Built truggy

Mugen Seiki Racing from the U.S. have introduced their new Limited Edition factory-built Mugen MBX8T nitro truggy kit. Mugen Seiki Racing’s Ryan Maifield and Adam Drake personally assembled a limited number of MBX8T Factory Built nitro kits that were built to Ryan and Adam’s specifications and include the recommended option parts from Mugen Seiki and Flash Point Racing Products. Built using Flash Point’s performance shock and diff fluids, these kits are geared towards a seasoned racer who’s looking for true performance.

View a list of the included option parts and the specifications here

May 15, 2020

ARC R12 mid-motor touring car kit

Following a couple of teaser images ARC have finally fully unveiled their all-new R12 mid-motor touring car kit. The car was developed with maximising traction, increasing drivetrain efficiency and lowering the overall centre of gravity in mind. The vehicle builds on a newly developed mid-motor double deck chassis construction whose massive yet lightweight mono-block motor mount bulkhead improves centre rigidity while allowing the front and rear to flex independently thanks to the split double deck design. The motor mount also features integrated belt tensioning for reduced belt skip and increased drivetrain longevity. The new mirrored front and rear upper decks allow for independent flex adjustment while brand-new front, centre and rear belt pulleys provide a centralised transmission system for increased stability and handling of the R12. An optional 3.5mm wide belt is available separately for the ultimate in durability even when running the most powerful modified motors. A newly developed mid pulley also allows for swift and easy main gear changes after undoing three screws.

Continue reading here

May 14, 2020

Ruddog MBX8 carbon fibre front wing set

Made for the Mugen MBX8 is Ruddog’s new carbon fibre front wing set that attaches right to the front upper arms. The set includes moulded carbon fiber wings as well as lightweight mounting brackets that fit right on top of the upper arms, making for a sturdy yet lightweight base for the wings. Using these aerodynamic aids will improve front end grip and traction at higher speeds while optimising the buggy’s balance when being airborne. In addition they are looking pretty slick and offer additional space for sponsor stickers.

Source: Ruddog [ruddog.eu]

May 14, 2020

Rêve D X2 V Compact AC 2-port charger

Coming soon from Rêve D is their new X2 V Compact 2-port multi-chemistry charger. The AC charger features 50W of charge power per channel, enough for up to 5A of charge current, it is of a pit-space-friendly tower design, it sports a blue back-lit display and integrated balancers for secure and convenient charging of Lithium batteries. The compact device is the product of Rêve D’s collaboration with Hitec Multiplex Japan and will hit stores soon.

View a list of the key features here

May 14, 2020

MST FMX 2.0 KMW RWD drift chassis kit – Coming soon

MST have released first images of their forthcoming new FMX 2.0 KMW RWD drift car kit. The vehicle will utilise an inline mid motor setup, fully customisable suspension components, as well as a carbon fibre chassis with twin vertical top deck construction with aluminium bulkheads. So far MST is pretty silent when it comes to features and specifications of the new kit but we bring you more details as they surface.

View more images here

May 14, 2020

Kyosho MP10 aluminium HD front & rear shock towers

Kyosho have announced the soon release of their new HD 50 front and HD 58 aluminium rear shock towers for the Inferno MP10 buggy. The shock stays feature a new shock geometry for added up travel when used in combination with #IF484 front and #IS215 rear shock bodies. In addition their reinforced design improves suspension efficiency, making them the ideal choice for rutted tracks or for tracks with big jumps. A hard surface coating ensures exceptional durability and in addition to the shock towers, Kyosho also offers new 70mm front and 81mm and 85mm rear springs in different, colour-coded, hardnesses and made of thinner-than-original 1.5mm wire.

View the rear shock tower and the shock springs here

May 14, 2020

Kyosho release new Ultima 2WD carbon & alloy optionals

Coming soon from Kyosho and made for the Ultima 2WD vintage re-release buggy are several new option parts such as front and rear carbon fibre shock towers and a CNC-machined aluminum heatsink motor plate. The shock towers are machined from high-quality carbon fibre for a low weight and exceptional stability and they are understood to match the stock suspension geometry. The shock stays are available separately and they include aluminium washers for a drop fit. Also new is a CNC-machined aluminium motor plate that features a heatsink design, making for improved heat dissipation when running higher-powered or brushed motors or when running in high ambient temperatures. The motor plate comes anodised in a gun metal colour.

View the other new parts here

May 14, 2020

T-Works E819 titanium & golden steel screw kits

T-Works have introduced new titanium and gold-coloured steel screw kits for the HB Racing E819 1/8th scale electric buggy. The 117-piece titanium screw set includes high-quality UFO head screws for cool looks and less weight compared to using steel screws with the 64 grade fasteners also offering improved corrosion resistance compared to standard steel screws. As for the gold-coloured 133-piece steel screw kit, the included fasteners feature a titanium-nitride coating for wear and looks while retaining the usual weight of steel screws.

View a sample kit of the gold-coloured screws here