Red RC

February 13, 2020

7075.it introduce new A800 optionals

7075.it have announced the release of new optional parts for the Awesomatix A800 series of touring cars. First up is a brass shorty battery holder set for the A800MMXA kit. Designed for the use with LCG or standard height packs the kit only fits the Awesomatix C01B-X-MMA mid-motor alloy chassis as well as the 7075.it flex version 7075-AWX-MMW and 7075-AWX-MM main plates and it is usable with the original Awesomatix battery hold downs or 7075.it’s new tape system battery holder. The design of the battery locators allows the chassis to flex freely while moving the weight as close to the chassis plate as possible for an overall lower centre of gravity. In addition the mounting holes are raised by 0.5mm to not disturb chassis flex. The battery holder set is recommended especially for high-bite surfaces like ETS or CRC black carpet.

Continue reading here

February 13, 2020

Kyosho RB7 aluminium battery post set

Coming from Kyosho and made for the Ultima RB7 2WD buggy is a lightweight aluminium battery post set. Machined from high-quality aluminium and coming anodised in a gun metal colour for looks and surface protection, the design of the posts allows to use O-ring hold downs to fasten the battery, which increases chassis flex and thus overall traction available. The battery posts also sport laser-engraved Kyosho logos in white colour and they fit both the RB7 and the RB7SS.

Source: Kyosho [kyoshoamerica.com]

February 13, 2020

2020 Keilor Invitational – Report

The Keilor Electric Off-Road Club of Melbourne, Australia hosted the 2020 Keilor Invitational last weekend. Australia’s version of the Reedy Race, this event is held on an outdoors dirt track in the Australian summer with the Invite classes running 5 heats of 2WD and 5 heats of 4WD in addition to open classes for both modified and stock, with the winner of these getting a direct invite to the 2021 event. For the 2020 event just under 130 entries were received from all around Australia, with the big talking point being the new track surface which had been treated with Canola oil dramatically reducing dust and tyre wear and proving a big hit with all racers. The layout had been changed since the 2019 Nationals held at the same track with a combination of sweeping and technical sections with large elevations and jumps challenging all levels.

Continue reading the report here

February 13, 2020

JConcepts Spring Dirt Oval Nationals – Announcement

JConcepts Events present the Spring Dirt Oval Nationals that will be held at the iconic HobbyTown facility in Omaha, Nebraska. The centrally located venue invites Dirt Oval racers of all skill level to race at the Plex on the weekend of the 5th of April. The indoor facility, managed by Alex Sturgeon, has a wealth of RC knowledge to go along with passion and always provides an experience like no other. Racers will tune to the clay based surface and utilize a controlled tire to simplify the event experience. HobbyTown’s track build will focus around their current Dirt Oval track, however, updates and size changes will accommodate faster speeds, better driver visibility, and include an overall racers feel to the dedicated event. Sign ups are already open here and more information can be found here.

Source: JConcepts [jconcepts.net]

February 13, 2020

Kyosho Fazer Mk2 aluminium HD front & rear hubs

Kyosho have announced the release of new aluminium HD front and rear hubs for the Fazer Mk2 series of cars. CNC-machined from high-quality aluminium and coming red anodised for wear and looks, the front hubs allow for a more precise and linear steering feeling as well as smoother suspension movement all while increasing rigidity. The front hubs’ design also enables the owner to adjust the camber angle. As for the rear hubs, these also improve suspension movement and rigidity while offering two different camber settings. The front and rear sets are available separately and they including mounting hardware.

View the rear hubs here

February 12, 2020

JConcepts 1993 Ford F-250 monster truck body

JConcepts have introduced their new 1993 Ford F-250 monster truck body with fastback and visor for rigid axle monster trucks. During the mid-1990’s the full-scale monster truck racing scene was at its all-time most competitive. Never before had so many factory backed teams competed for the coveted racing championships during that time period. The Ford bodies were always successful, however, never had one style been so dominant. The 1993 Ford F-250 body was the standard and the top of the line in terms of looks, popularity and performance back during this hey-day of monster truck racing. Never has this body style been available for 1/10th scale Monster Truck racing, that is until JConcepts pulled the trigger. For the ninth generation, the body-shell of the 1993 F-Series was given another major upgrade. To further improve its aerodynamics, the forward bodywork was given a slightly lower hood line, rounding the front fenders and grille. The “Blue Oval,” a trademark of all Ford pickups, makes a striking appearance centered in the grille. Stout fender flares are carved ever so carefully into the panels while openings allow for a vast assortment of tires on the market. The F-250 single-cab look is strong and is a careful reminder of a time when passengers sat side-by-side during a typical outing. The body fits a variety of racing RC monster trucks including the Tamiya Clod Buster, it comes clear and includes an authentic decal sheet and easy to use window mask for the detailed hobbyist.

View more images here

February 12, 2020

ProTek B6.2 & universal chassis protectors

Coming from ProTek are chassis protector sheets for the Team Associated B6.2 and B6.2D buggies as well as a new universal sheet sporting the USA flag. First up is a “thick” pre-cut chassis protective sheet, designed specifically for the Team Associated B6.2 +3mm chassis. It is made from 12mil laminate and backed by an aggressive adhesive vinyl. Each sheet is cut to exact dimensions of the model, and provides a professional look while helping to protect the chassis. Protective sheets are highly recommended for both new and used chassis to resist against scratches and scrapes and prolong the life of the chassis. In addition to protecting the chassis, the stickers provide a slick and smooth chassis surface which helps reduce friction when contacting the race surface. Usable for the standard wheelbase B6.2D is the older spec B6.1 and B6.1D protective sheet that is also available now.

Continue reading here

February 12, 2020

Yokomo BD10 rear aluminium & steel stiffeners

Made for Yokomo’s BD10 mid-motor touring car are two rear chassis stiffeners. Available as lightweight aluminium or heavy steel variant, the cross-shaped stiffeners not only help to adjust the torsional stiffness of the rear chassis area in various ways, the the steel variant also adds a certain weight which can be beneficial in both low and high-grip track conditions, as it can increase traction while also countering traction rolling. The stiffeners are available separately and they are a direct fit.

View the steel chassis stiffener here