Red RC » Hobby-Off

May 2, 2018

RPM Traxxas VXL-3S ESC cage

RPM have introduced a new ESC cage for the #3355R version of the Traxxas VXL-3S speed controller. The mounting tabs have been reported to RPM as weak and this is why the RPM part eliminates the use of the two mounting tabs on the ESC in favour of a complete cage system that solidly locks the ESC in place. By completely surrounding and capturing the VXL-3S speedo, damage from broken tabs and ejection from the vehicle has been completely eliminated and the cage works perfectly even if one or both mounting tabs on the ESC have already been broken or cut off. Each RPM ESC cage, that is available in black or blue colour, is made from a strong, ultra lightweight blend of engineering grade nylons for exceptional durability.

View more images here

May 1, 2018

HRC Racing 40T Crawling Racer brushed motor

Coming from HRC Distribution is the HRC Racing 40T Crawling Racer brushed motor. The 540-class motor utilises ceramic magnets and low resistance wire for outstanding performance while slotted heatsinks on the motor head reduce operation temperatures. The motor, that is of a fully rebuildable design including easy to replace brushes, fits most 1/10th scale crawlers and it comes pre-soldered with bullet-type connectors.

View another image here

May 1, 2018

RPM T-Maxx/E-Maxx HD rear bumper

RPM have introduced a new heavy duty rear bumper for the Traxxas T-Maxx and E-Maxx monster trucks. The newest version of the bumper is designed to allow the use of a stock Traxxas wheelie bar, yet beef up the protection of the rear end of the truck dramatically. The designers have strengthened the supports around the screw holes and extended both the height and width of the bumper for exceptional performance and protection for the rear of the truck. The unique design also adds an aggressive rear-end profile. The bumper is available in black or blue to match or contrast any paint scheme and each bumper is moulded in RPM’s world-renowned blend of engineering-grade nylons.

View another image here

April 26, 2018

Xtreme Racing Unlimited Desert Racer CF panels

Xtreme Racing have introduced a set of lightweight drivers compartment panels cut from carbon fibre. The parts were designed as a direct replacement for the standard plastic items and they are made from high-quality 1.2mm plates. The 8-piece set uses the original hardware and it is available from now on.

View another image here

April 26, 2018

Losi Tenacity-DB 1/10th 4WD desert buggy RTR

Coming soon from Losi is their new Tenacity-DB 4WD RTR desert buggy. Following the Tenacity-MT, T and SCT, the DB is the fourth vehicle within the Tenacity range and it features a scale-looking roll cage, driver figures and it is powered by a Fuze 3800kv 550-class 4-pole brushless motor and a Dynamite 130A brushless speed controller. A 9kg waterproof steering servo makes for go-everywhere capability as does the 4WD driveline with adjustable differentials and coil-over fluid-filled shock absorbers on all four corners. The composite tub chassis features bottom-loading battery tray and the buggy is rounded out by a race-inspired body shell that is available in blue or red tone. The ready-to-run set, that comes including a Spektrum DX2E Active transmitter and AVC system, is available from May.

View a list of the features and more images here

April 26, 2018

Yeah Racing TRX-4 Ti-coated alloy diff cover

Coming from Yeah Racing and made for their recently introduced titanium-coated TRX-4 alloy axle housings is an Ti-coated diff cover. The item is made from aluminium and it sports the same titanium coatings as the diff axles, making it a perfect complement. Due to rocking the special coat, the part is hard-wearing and scale looking at the same time.

Source: Yeah Racing [yeahracing.com]

April 24, 2018

Xtreme Racing Mugen & Arrma CF shock towers

Xtreme Racing have introduced new carbon fibre shock towers for a range of vehicles including the Mugen MBX8, MGT7 and Arrma Talion V3. The MBX8 front and rear tower are machined from 5mm carbon fibre while the MGT7 on-road shock stays are cut from thinner 4mm carbon fibre. The Talion V3 items are again cut from thicker 5mm material to up durability for bashing conditions. All items are designed to match the respective standard kit geometry, they are made in the USA and are available separately.

View the other new parts here

April 24, 2018

Pro-Line BFGoodrich T/A KM3 1.9” crawler tyre

Coming from Pro-Line is their all-new BFGoodrich Mud-Terrain T/A KM3 1.9” G8 Rock Terrain truck tyre for scale trucks and rock crawlers. Pro-Line was given early access to the design of the just announced full-size BFG Mud-Terrain T/A KM3 tyre and recreated it for the Scale Crawling community in 1.9” size. Its aggressive tread lugs bite into loose or muddy surfaces and climb over slippery rocks which is further helped by the soft G8 rubber compound. Based on the BFGoodrich Krawler T/A KX symmetric tread design, the Mud-Terrain T/A KM3 features deep, self-cleaning independent tread blocks and linear transverse flex zones to provide the grip that you need to get over the toughest obstacles. Pro-Line’s scaled-down variant fits most 1.9” crawler rims and it comes including suitable foam inserts.

Source: Pro-Line [prolineracing.com]