Red RC » News

November 20, 2016

Samix SCX-10 II rear shock mount plate

In addition to the recently introduced front shock plate, Samix have now also announced the release of the rear counterpart. Machined from aluminium and coming decorated with laser-etched Samix logos for look, the parts allow to utilise up to nine different shock mounting locations while offering added strength and improved looks over the standard kit mounts The parts include all needed hardware, they are usable with Samix’s upper stiffener plate and they come in the three colours of green, black and gun metal.

View another image here

November 20, 2016

Vigor RC introduce new TRF419X carbon fibre options

Vigor RC have introduced new carbon fibre option parts for the Tamiya TRF419X touring car. First up is a 2.25mm lower chassis that features a fully symmetrical design, offering equal steering characteristics in both directions. On top of this the chassis provides higher corner speeds and improved car balance. Next up are 2.0mm and 1.6mm carbon fibre upper decks. A direct replacement for the stock part the top decks allow to fine-tune the overall grip available with the thinner 1.6mm plate being recommended especially for low-grip conditions. Last but not least are carbon fibre battery retainers. The L-shaped parts keep the battery in place even in hard impacts and they come in sets of two.

View the other new parts here

November 20, 2016

Lee wins in Xiamen as Kurzbuch secures pole

lrsat-kurzbuchact

Saturday at the Guan Kou Sunpadow Grand Prix in Xiamen, China and the remaining two rounds of qualifying for all classes was reduced to just one with the weather forecast predicting rain. This decision made in the morning confirmed the top qualifying spot for both Simon Kurzbuch and Nicholas Lee in the 1/8th and Modified touring classes having both took all 3 rounds on Friday. It was also decided to run two of the 3 touring car A-mains on Saturday, but in the end the forecast was, as it most of the time is, wrong and it turned out to be a warm sunny day.

Continue reading the report here

November 19, 2016

Markus Hellquist wins at Swedish Indoor Cup Rd1

The opening round of the Swedish Indoor Cup was hosted by the Wäxjö MS club on a quite technical track. The race format was three rounds of qualifiers with the best round to count followed by triple A-mains. Right from the start Markus Hellquist showed a very strong pace and he would take the TQ a few seconds ahead of teammate Erik Ström with Fabian Vernersson completing the top 3 only two tenth of a second short of Erik. In the finals Markus made a clean sweep to take the win while Erik was able to defend his runner-up spot. Behind the two Daniel Carlsson would end the day on the three spot from Mikael Fransson and Andreas Johansson in fourth and fifth.

View the final results here

November 19, 2016

Techra T4 Stock Racing hard-coated front spool cups

Coming from Techra and made for the Xray T4 touring car are hard-coated aluminium front spool cups. The lightweight parts are machined from 7075-T6 aluminium and they scrub about 5g of weight compared to Xray’s optional spring steel cups while offering higher rigidity than the standard composite parts. Their hard-coated surface in combination with Techra’s delrin drive shaft caps make them very durable, although they are only recommended for stock racing.

Source: Techra [facebook.com]

November 19, 2016

STRC Traxxas 2WD front brace & battery hold down

ST Racing Concepts have introduced two new option parts for the Traxxas 1/10th 2WD series of vehicles such as the Stampede, Rustler, Bandit and Slash. Aimed towards the Stampede and Blackfoot trucks is the new front suspension hinge-pin brace kit featuring a heavy duty CNC Machined aluminium front hinge-pin brace complete with a pair of heat treated polished steel hinge-pins with lock-nuts. The set provides more durability against impact to the front suspension arms of Traxxas’s 2WD trucks and it fits the Rustler/Bandit and Slash 2WD as well.

Continue reading here

November 19, 2016

Kurzbuch & Lee dominant in Xiamen after 3 rounds

lrthurs-group-2

This weekend sees the top drivers from China, Taiwan and Hong Kong, along with some select top international racers, including current World Champion Simon Kurzbuch, descend on the ARC International Raceway in Xiamen, China for the Guan Kou Sunpadow GP. Greeted by this amazing facility with its 200m long 3 storey driver stand and impressive track, this is the same facility that will host the 2017 IFMAR EP Offroad World Championships next November on its dirt offroad track. This race is for onroad only with 8 heats of 1/8th scale onroad and 7 heats of EP onroad split between modified and stock. This is also a money race with the winner in each class to receive approximately USD 3000.

Continue reading the report here

November 18, 2016

Tekno MT410 1/10th 4×4 Pro Monster Truck kit

Tekno MT410 1/10th 4x4 Pro Monster Truck kit

Tekno RC have announced the newest addition to their line up of off-road vehicles in the form of the MT410 1/10th electric 4×4 Pro Monster Truck kit. It is based on the proven ET48 platform that is raced at the highest levels of competition. The vehicle features a shaft drivetrain, long travel suspension and it is able to accommodate many electronics, tires and bodies from popular monster trucks as a direct fit. Parts and upgrades are readily available since the MT410 shares parts with the ET48, EB48, and other Tekno RC vehicles. The kit is available from now on.

View more images here