More new items from Elangears with the release of this easy to use Power Bridge. This compact unit extends your power supply by turning one output into four, two of which sport an on off switch. Orange/yellow in colour, like the other products in the series, it also comes with 2 USB ports for charging and powering your portable devices.
Source: Elangears [facebook.com]
Last weekend the 1st Pit Lane Cup took place in Barceloneta, Puerto Rico. KM racing driver Andy Báez took the pole position for the race, while in second position was Fernando Méndez also with a HK-1. In the final the order of the front pairing remained unchanged as Andy took the win by less than a lap from Fernando, with Kyosho driver Anger Santiago in 3rd.
Source: KM [km-rc.com]
C2 have released their first product for 1/8 and 1/10 Scale Touring, Racing & GT Cars, dual stage shock absorber pistons. The job of the suspension is to reduce the vibrations from the wheel and the chassis in a controlled fashion caused by an uneven road or changes of direction. These new CNC machined pistons are designed to allow racers to have faster or slower rebound depending on which type of piston is used. Different rebound slow down rates are available for fine tuning. Available for Motonica, Mugen (above), Shepherd and Serpent.
View the Shepherd versions here
SpeedMerchant have released this damper tube conversion for the Associated R5.1 In-Line LiPo chassis that lets you run SpeedMerchant Damper Tubes as well as their popular Linear Springs. The kit includes top plate, tweak plate, SpeedMerchant damper tubes, SpeedMerchant linear spring conversion (.18, .20 & .22 Springs) and 2-56 ball studs and nuts. A quick and easy change that will make your R5.1 LiPo easier to drive, quicker in the corners and more consistent lap to lap.
Seen at last weekend’s Short Course Showdown, JConcepts adds to its extensive accessory line with the addition of a user friendly shock stand. During shock rebuilds racers are always searching for that perfect shock stand which is light-weight, durable and easy to set-up and tear-down on any given race day. The JConcepts shock stand has 2 different heights which accommodate both 1/10th and 1/8th length and diameter shocks as well as center-punched dimples which help locate center. The design is also centered around a placement area which a standard soda can or water bottle can be used as a dump location for used fluids. For the extra efficient racer, the shock stand will also stack inside the JConcepts Vehicle Stand to maximize space and for packing considerations. As a bonus the shock stand can be used as a serviceable stand for an iPad or cased iPhone for a neat and clean pit area or general use around the home or office.
View more images of the shock stand
Following intensive testing at some of the biggest events in 1/8 scale, Pirani RC have released its new 8mm gear-shaft develop for Shepherd V8 Eleven. Designed and produced by Andrea Pirani this complete conversion kit increases engine performance in high traction condition. This kit increases the transmission of power from engine to drive wheels and the kit includes new aluminium 7075-T6 side support, new hard-coated steel shaft, new low friction kevlar pulley and new light weight gear box.
STRC have produced suspension links for the Axial Wraith out of heavy duty CNC machined aluminium. Instead of going with the cheaper looking aluminium tube design, these lower and upper suspension links feature the same lightweight design as the stock plastic pieces with weight saving holes drilled out in the suspension links while preserving the same thickness as the stock plastic pieces that makes these links near indestructible. The stock plastic steering linkage on the Axial Wraith is also a weak point on this vehicle, as the stock pieces tend to be sloppy and weak in transferring the torque and power coming from the steering servo. These CNC Machined Aluminium Steering link features 7mm thick aluminium tubes for lower and upper steering links. The upper link features a slight bend that allows for all the power and torque from the servo to be transferred in a perpendicular angle to the arm of the knuckle to ensure no power is loss in the transfer. Suspension links and steering links available in Gun Metal, Black, Green and Silver.
Last weekend was the fourth round of the Belgian championship for 1/8 Gas & 1/8 Brushless. The weather was unstable and at the end of the expert final they had a few showers. The track of the MBRC is fast with great grip and is very tricky after a 8 hours endurance held a few weeks ago. HongNor team driver Robert Raphael managed to win both expert and brushless classes with his X2-CR and NEXX8-E.
