CS Electronic from Germany have been in touch to let us know about their new range of pre assembled 7.2V battery packs, called Power Pack. Available in 4000MAh, 3700MAh, 3300MAh and 3000MAh they are made using high quality cells and offer great run times and performance as well as great value for money. All packs have a plastic outer casing and are supplied with a Tamiya type plug.
Click more to see the other packs… content
We have been contacted by the organisers of the Xceed Challenge Cup in the Netherlands to let all our EP Touring Car racing visitors in Europe know about this upcoming event. Held on the new indoor facility from the MACH club in Heemstede, near Amsterdam airport, the race takes place November 24th and 25th this year, and has already attracted a number of quality drivers from around Europe. Entry is currently open and closes on November the 5th so be sure to get your entry in straight away to avoid dissapointment.
Click here for the full event details… content
A summary of other news pieces from around the internet today in our Red RC Round-up:
> The FF RC Concepts FF’07 1/12th scale – Link [ffrcconcepts.com]
> Detailed tests with the Kawada M300RSX – Link [icchyou.blog.ocn.ne.jp]
> Pictures of the Serpent Proto & CEN ReMatrix buggies – Link [rccaraction.com]
Hot Bodies have announced the release of this very bright, easily recognisable, red Hot Bodies team t-shirt. The shirt is available in a variety of sizes to fit Hot Bodies fans of all shapes and ages and features a large HB and Hara logo on the front, and a small off center HB and Hara logo on the rear.
Click here to see the rear of the shirt… content
The 10th annual Team Orion Cup was run at the weekend in a large indoor venue in the town of Zillisheim, France. Some of the best racers in Europe were present at the event which saw TQ in the Expert class go to British Hot Bodies team driver Olly Jeffries just in front of European Championship TQ driver Steven Weiss from Germany racing for Xray, and top French driver Lucas Urbain in 3rd using the Losi JRXS-R. In the Amateur qualifying it was pole position for Corally racer Oliver Beining in front of team mate Gerrit Van Swijgenhoven in 2nd while 3rd spot went to HB driver Alain Sonval. The Expert final saw a win for Steven Weiss from Schumacher racer Alexandre Laurent in 2nd and Olly Jeffries in 3rd, while in the Amateur class the win went to poleman Oliver Beining with Gerrit Van Swijgenhoven in 2nd and Stéphane Roufosse in 3rd.
Image: Mr Clongwy [mrclongwy.aceboard.fr]
Inspired by team drivers, this great new kit installs a second, larger idler pulley on your X-Factory X-5 Squared to reduce belt skip while maintaining complete driveline freedom. Your Squared idler bar is pre-drilled and tapped with holes for the Upgrade system, so installation is easy. The larger pulley mounts closer to the drive gear, increasing belt wrap and that reduces skip both on acceleration and braking. The normal idler is moved further back and slightly down on the idler bar, and the bar installs in the X-5 Squared just as it always did. This pulley arrangement allows the belt angles to be less than with just one, so driveline freedom is maintained.
Source: X-Factory [xfactoryrc.com]
Kawada have released some spacers for the rear axle of their M300, and other 1/12th scales with 1/4″ (6.35mm) axles. Made from aluminium they are sold in a set of 12 with 4 of each size, 0.5mm, 1.0mm and 2.0mm widths, and help adjust the rear track width of the car as shown in the picture above.
Source: Kawada [kawadamodel.co.jp]
Edit RC have released these rather green but handy Connectable Parts Box for easy storage of all your small workbench parts. Ideal for shims, e-clips, washers, crystals, diff balls, screws, nuts, pivot balls, ball ends, body clips and much more. Each small box interconnects with other parts boxes so you can have any combination of required parts handy for multiple tasks. No need to remove box contents to re-organize, just detach the boxes and re-attach as needed. Each package contains six connected parts boxes.
Source: Edit RC [rc-edit.com]
