Red RC » P Off Road

January 1, 2014

Pro-Line 1/8th Pin Point Z3 tires

Pro-Line Pin Point 1/8th

Pro-Line have sent us an exclusive image of their new Pin Point Z3 (Medium Carpet) Off-Road 1/8th Buggy carpet tires for front or rear. With Pro-Line entering the 1/10th carpet offroad market half way through last season, and being selected as the control tire for the popular EOS, the US company has jumped into the growing 1/8th carpet offroad scene with a larger version of their Pin Point pattern in carpet compound. We are told the tire will be made available in mid January.

Source: Pro-Line [prolineracing.com]

January 1, 2014

JConcepts Dirt Webs tires

Developed by Brian Kinwald and JConcepts designer Jason Ruon, Dirt Webs debuted during the 2013 IFMAR World Championships in Chico, CA, where Ryan Maifield used the front tire to set the fastest lap times on his way to 3rd overall in the 2wd class. Originally based on the popular Pressure Points tire and combining uniformly positioned Web-Bars to create an amazingly stable tire. The Dirt Webs relies heavily on the Web-treatment for massive forward acceleration while inside the supported bar portion rests horizontal and vertical alternating bars which help balance side-bite and backs up the Web-Bars to help minimize wear. Down in the corners, small Pressure Point sized pins break-in quickly providing surface area for specialty indoor racing and also lend a helping hand to stabilize the tire in extreme high-grip conditions.

View more details here

December 31, 2013

TLR 22 2.0 Universal Joint driveshafts

New from TLR, designed for the 22 2.0, these Universal Joint (UJ) driveshafts create less “Bone Bind” or “Driveshaft Lock-Up” allowing for freer rear suspension movement, especially on power. This allows the car to squat more on acceleration, creates more side bite and is more consistent when throttle inputs vary. This is a great setup tuning option for high-grip surfaces or very bumpy surfaces, especially outdoor Astro Turf, carpet and some higher bite dirt or clay surfaces. The Horizon Hobby UK is exceptionally excited for this product release as they have found great improvements in performance with the UJ’s on most of their circuits.

Source: TLR [horizonhobby.com]

December 30, 2013

Reds Quattro shoes clutch system

Reds Racing have released their new Quattro 4-shoe offroad clutch system. The new clutch is designed to make the engine power output more linear and smoother offering the best traction, vehicle drivability and low fuel consumption. The new clutch is completely adjustable and thanks to a rotating front plate there’s no need to disassemble it or to change springs. The clutch is 100% made in Italy and comes pre assembled and tested to ensure the best performance and reliability.

Source: Reds Racing [redsracing.it]

December 30, 2013

Yeah Racing SCX10 aluminium centre gearbox

Yeah Racing have produced this aluminium centre gearbox for the Axial SCX10. Made from high grade lightweight aluminium, it is a direct replacement for the stock parts using the standard bearings and gears. It not only improves strength and durability, it offers an upgrade on the looks front too.

Source: Yeah Racing [yeahracing.com]

December 30, 2013

VP Pro Turbo Trax Evo front tires

VP Pro Turbo Trax Evo

VP Pro has announced the addition of a new tread pattern named ‘Turbo Trax Evo’ to their 1/10th 4WD off road buggy front tyre range. The Turbo Trax Evo offers plenty of contact for consistent traction on a wide range of racing surfaces and it is available in three compounds for various conditions.

Source: VP Pro [vp-racing.com]

December 29, 2013

PSM BMax4 III shock towers

PSM Racing have released new front and rear shock towers for the Yokomo BMax4 III. The front shock tower is made from high quality 4mm carbon fibre, weighs only 7.5 grams and sports an additional shock position over the stock tower. The rear shock tower is also 4mm thick weighs only 10.5 grams and also has an additional shock position.

View the front shock tower here

December 28, 2013

Yeah Racing 30/40mm heatsink fan mount

Yeah Racing have new heatsink fan mounts for 540-size electric motors available. Coming in blue, black and gun metal colour the mounts are CNC-machined from aluminium and offer mounting patterns for both 30mm and 40mm fan units. The design allows to adjust the distance from the motor as well as the angle of the fan making it ideal for touring cars, 4WD buggies and 4WD short course trucks.

Click here to view more photos