Red RC » P Off Road

July 19, 2013

Tourex Power Switch & alloy servo bushings

German Tourex distributor RMV Deutschland introduce an electronic on/off switch called Power Switch and also aluminium servo bushings. Starting with the switch, the MCU controlled offering does away with the problems associated with conventional mechanical switches as it is housed in an enclosed case and therefore offers very good dust protection. The switch is best used in nitro vehicles and offers a NiMH and LiPo mode with the latter including a low-voltage protection. Upon arming a multi-colour LED also indicates the capacity left in the receiver battery. The switch comes pre-wired with JR-compatible connectors and two kinds of bottom covers. Also new are special aluminium bushings to replace the rubber servo grommets on steering and throttle servos. The machined parts sport a diameter of 3.7mm and an upper countersunk washer part while being gun metal anodised. The bushings come as 8-piece set and make for a rock-solid servo installation.

Click here to view the servo bushings

July 19, 2013

Sweep Cubix 1/8th buggy tyre

Sweep Racing introduce the Cubix 1/8th buggy tyre. As the name implies the new offering makes use of medium-size square pins that are of nearly cubic dimensions and also widely spaced. It is understood that the tyre will soon be available in Sweep’s usual line of compounds from medium to ultra soft and as tyre only and or pre-mounted variant.

Click here to view another photo

July 19, 2013

RB Cyclone 1/8th buggy tyre

RB announce the official release of the new Cyclone 1/8th buggy tyre. It makes use of a flat tread with mainly square blocks giving the tyre lots of grip and stability. Included come new double hardness inserts that sport a softer outer ring to absorb bumps and imperfections of the track while a harder inner foam is giving better support at high speeds and when the going gets tough. The Cyclone already proofed its capabilities by setting the TQ and the fastest lap times in the hands of Davide Ongaro at the European B Championship and it is available pre-mounted or as tyre only in medium, soft and super soft compound.

Click here to view the insert

July 18, 2013

Xceed aluminium setup tools

New from Xceed come several new setup tools in the form of chassis blocks, ride height, downstop and camber gauges. The setup blocks are 20mm high and ideally used when measuring 1/8th car body heights as per EFRA rule and they also come as set including the droop gauge. Available in two sizes are the camber gauges, the smaller for 1/8th to 1/12th on-road cars and the larger one for 1/8th GT and off-road cars. All tools re are machined from high-quality aluminium and come anodised in Xceeds signature green colour.

Click here to view more photos

July 18, 2013

Xray XB9E electric buggy announced

Xray introduce the XB9E 1/8th electric off-road buggy. The follow-up model of the long-running XB808E is based on the successful XB9 platform, making use of its gearboxes, drivetrain, suspension parts and shocks. The chassis though is developed from the ground up to create the optimum in weight balance, weight distribution and handling. The vehicle is based on a longer and wider 3mm 7075-T6 aluminium chassis with new side guards, a central battery mount and an updated – easy to remove – radio tray with sealed receiver box and carbon fibre servo mount plate. The 7075-T6 aluminium motor mount is of a sliding design and 2mm wider compared to the old variant for improved durability. Also new is the composite battery mount with higher barriers to securely fasten one 4S or two 2S LiPo battery packs while the speed controller finds its home on a large surface plate in-line with the battery.

Click here to continue reading

July 18, 2013

Tourex 1/10th buggy tyre gluing bands

Tourex 10th tyre gluing bands

Available soon are Tourex’ new tyre gluing bands for 1/10th off-road tyres. They are made from a flexible rubber material and are designed to press the tyre agains the rim while the glue dries in order to achieve perfect bonding between the two. Included in the set are four bands in red colour.

Source: RMV Deutschland [rmv-deutschland.de]

July 18, 2013

RPM B4 series front A-arms & bulkhead

The RPM front A-arms and bulkhead set is designed for all Team Associated B4 series vehicles including the newer B4.1 and B4.2. The wishbones sport an updated design with the hinge pin retaining screws now sitting in-line with the pins to overcome structural weakness issues associated with the original design. The arms are also a lot beefier that the stock items and come moulded in RPM’s genuine nylon compound for added rigidity. They are made to retain the stock geometry and also include a suitable front bulkhead.

Source: RPM [rpmrcproducts.com]

July 17, 2013

Serpent Cobra Ready-to-Race nitro buggy

Available now is Serpent’s latest 1/8th nitro buggy in the form of the Novarossi-powered Cobra RTR. The vehicle comes factory assembled, is based on the competition variant and features a 3-diff shaft drivetrain, 16mm aluminium shock absorbers, front and rear anti-roll bars, aluminium shock towers and full RTR spec including metal gear servos and a 2.4GHz pistol grip radio system. The buggy is powered by a genuine Novarossi pullstart engine and comes with Serpent’s latest Avenger design body shell.

Click here to view the features and more photos