Red RC » P Off Road

February 28, 2013

RB Blast V11 limited edition

RB introduce the Blast V11 limited edition .21 buggy engine. The long stroke engine is made in Europe and features a bi-turbo 14mm crankshaft, lightweight conrod, high-quality front and rear ball bearings, 5+2 port liner and Multi Exhaust System. Other features include a turbo combustion camber insert and a 9mm buggy carburettor with 7mm venturi reducer. The engine is available single item or as combo set including EFRA 2045 in-line pipe and manifold.

Source: RB [rbproducts.com]

February 28, 2013

Duratrax Onyx 35C LiPo batteries

New from Duratrax come two hardcase LiPo battery packs. They are build from 35C cells with a capacity of 5000mAh and come with your choice of genuine Traxxas or Deans Ultra Plugs connectors. The economically priced packs are the ideal choice for practice or club level racing.

Source: Duratrax [duratrax.com]

February 28, 2013

Much More Fleta ZX BL motors

Much More Racing introduce the Fleta ZX electric brushless motors. They feature a black anodised full aluminium case with large airflow openings, balanced sintered rotors with laser-etched diameter markings, and an easy to adjust timing system. The motors are available as 3.5T to 8.5T modified and 10.5T to 21.5T stock variant.

Source: Much More [muchmoreracing.net]

February 27, 2013

Bittydesign RC8.2 Force 2.0 shell

Bittydesign continue to update their Force line of bodyshells, this time the RC8.2 shell getting an update to the Force 2.0. With the first version of the body working really well, Yannick Aigoin running the body at recent races, the changes have been exclusively aesthetic. They have given the cab a modern look more in line with other Force bodies and they reinforced the front part near the clip mounting area and finally changing the design of later big air scoop and improving the 3 fins on the roof that are now more detailed. As usual the body is produced with 1mm original Lexan polycarbonate and it comes complete with protective film, decal sheet and window mask.

View more images of the Force 2.0 here

February 25, 2013

X Factory hub camber plates

X Factory introduce 3mm carbon fibre hub camber plates for the use with the Team Associated aluminum hub carriers. Coming as a set of four, including a pair of 4-hole plates of standard AE height and two 3-hole plates that are 0.072” lower than standard. The lower ball stud gives the car better balance in corners because it does not shift as much weight to the outside tire. The camber link plates come with black 0.030” spacers to extend the ball stud so the ball cup does not interfere with the hub carrier, and two black locking nuts to secure the ball studs. The plates for all cars that make use of the AE aluminum hub carriers.

Click here to view a picture of the installed part

February 25, 2013

Team Torke 4400mAh Shorty LiPo pack

Team Torke have released a new Shorty LiPo pack for cars with limited space for the battery pack or for those racers that wish to play around with the weight balance of their car. The pack is a hard case 4400mAh 60C 7.4v 2S battery which sports the standard bullet connectors.

Source: Team Torke [team-torke.com]

February 24, 2013

PSM B4.2 aluminium rear axle

PSM introduce an aluminium rear CVD axle for the Team Associated B4.2 buggy. Machined from 7075-T6 aluminium the shafts weight only 2.5g per piece are of a heavy duty design and come including rubber O-rings for a secure fitment of the drive pin. The axles are made in Germany, come in sets of two and are available now.

Source: PSM [psm-rc.com]

February 22, 2013

RB One buggy option parts

Following new clutch bells and different size main gears RB introduce more option parts for the RB One RTR and One R buggy. First up are front and rear anti-roll bar wires in different diameters. The front variants come in 2.0mm, 2.2mm and 2.7mm diameter while the rear ones will come in 2.3mm, 2.7mm and 2.9mm. They are the perfect addition to the kit’s 2.5mm anti-roll bar, help to fine-tune the buggy’s setup and are available separately or as set. Next up is an optional Ackermann plate for the steering assembly. Available as an increased length variant the new link makes for better steering response. Last but not least come optional tapered shock pistons. They are available as 6 hole 1.3mm, 8 hole 1.2mm and 10 hole 1.3mm variant to adjust the damping characteristics to your liking. The machined pistons sport a tapered design to control up and down travel speed.

Click here to view the other new parts